UHSDR
UHSDR copied to clipboard
df8oe
SDR firmware and bootloader with configuration files for use with Eclipse, EmBitz and Makefile
I have installed the stm32F429 by mistake, I have installed the P6 jumper and it only enters the BOOT LOADER mode by pressing the BAND+ button but I cannot get...
### Firmware Your firmware version: 28th Aug v2.11.67 Your bootloader version: 5.0.4 ### Hardware Chinese made RS-918, brand new. ### Describe the issue: 50Mhz Tx initially works after powering on...
Hey guys I looked at the code used to calculate the power within the filter bandwidth because I am trying to do something similar in a different (completely unrelated) project....
I have been asking for a long time whether the McHF firmware (RS918) can be set when transmitting CW from the BEACON mode memory. This is a mode where the...
Dear Sir, As the old digital mode like RTTY and PSK is few on air now, the new FT8 mode become the hotest digital mode in HF band. Can we...
It may be outside the scope of this project for this, but is there any interest in a "terminal" mode for the transceiver where the UI + hardware is used...
# UHSDR Firmware Defect Issue (Bug) Template 1.1 Please fill out the appropriate values. Remove inapproriate/irrelevant values, but be prepare to provide more data. This template contains the most often...
### Software Your firmware version: D2.1.96 (6 Mar 2021) Your bootloader version: 5.0.4 ### Hardware * UI Board: mcHF 0.6.3 * RF Board: mcHF 0.6.3 ### Describe the issue: Loving...
Hi This is not a bug, but a suggestion :) After turn on touchscreen and calibration, it cannot be disable touch. The touch screen works all the time. firmware version:...
FW version: D2.11.87 Bootloader version: 5.0.1 Hardware: Clone Describe the issue: Display dimming settings are not saved to EEPROM. After a restart I always find myself lowering the dimming settings....
