[feature request] add support for bonded interface

[niekosau]

it will be nice to have support for bonded/virtual interfaces, for example:

[root@mysql-22 ~]# ip add show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: em1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000
    link/ether b0:83:fe:dc:c7:68 brd ff:ff:ff:ff:ff:ff
3: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000
    link/ether b0:83:fe:dc:c7:68 brd ff:ff:ff:ff:ff:ff
4: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
    link/ether b0:83:fe:dc:c7:68 brd ff:ff:ff:ff:ff:ff
    inet 10.5.228.34/24 brd 10.5.228.255 scope global bond0
       valid_lft forever preferred_lft forever
    inet6 fe80::10ca:89ff:fefd:231e/64 scope link
       valid_lft forever preferred_lft forever

[root@mysql-22 ~]# cat /proc/net/bonding/bond0
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)

Bonding Mode: IEEE 802.3ad Dynamic link aggregation
Transmit Hash Policy: layer2 (0)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 200
Down Delay (ms): 200

802.3ad info
LACP rate: slow
Min links: 0
Aggregator selection policy (ad_select): stable
Active Aggregator Info:
    Aggregator ID: 1
    Number of ports: 2
    Actor Key: 9
    Partner Key: 18
    Partner Mac Address: 00:06:f6:2f:d0:80

Slave Interface: em2
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: b0:83:fe:dc:c7:68
Slave queue ID: 0
Aggregator ID: 1
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
    system priority: 65535
    port key: 9
    port priority: 255
    port number: 1
    port state: 61
details partner lacp pdu:
    system priority: 32768
    oper key: 18
    port priority: 32768
    port number: 532
    port state: 61

Slave Interface: em1
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: b0:83:fe:dc:c7:67
Slave queue ID: 0
Aggregator ID: 1
Actor Churn State: none
Partner Churn State: none
Actor Churned Count: 0
Partner Churned Count: 0
details actor lacp pdu:
    system priority: 65535
    port key: 9
    port priority: 255
    port number: 2
    port state: 61
details partner lacp pdu:
    system priority: 32768
    oper key: 18
    port priority: 32768
    port number: 276
    port state: 61

because now auto discovery output looks like:

[!] Running 50 threads.
[*] Connecting to 10.5.228.34:22 as "arunas" using key file.
[+] Linux running @ 10.5.228.34
[+] Collecting data from: 10.5.228.34
[_] Waiting for threads to finish. Current thread count: 4
[_] Waiting for threads to finish. Current thread count: 4
[_] Waiting for threads to finish. Current thread count: 4
[_] Waiting for threads to finish. Current thread count: 4
[_] Waiting for threads to finish. Current thread count: 4
[_] Waiting for threads to finish. Current thread count: 4
[_] Waiting for threads to finish. Current thread count: 4
[-] Error in get_hdd_info_hdaparm() for IP: 10.5.228.34 . Message was: [u'SG_IO: bad/missing sense data, sb[]:  70 00 05 00 00 00 00 0d 00 00 00 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\n']

Linux data:
{'device': 'mysql-22', 'macaddress': u'b0:83:fe:dc:c7:68', 'tag': u'bond0', 'ipaddress': u'10.5.228.34'}
{'device': 'mysql-22', 'macaddress': u'b0:83:fe:dc:c7:68', 'port_name': u'bond0'}
{'new_name': 'mysql-22', 'cpupower': 2799, 'name': 'mysql-22', 'serial_no': u'2HK0H32', 'hardware': u'PowerEdge R420', 'osverno': '3.10.0-327.13.1.el7.x86_64', 'cpucount': u'2', 'osver': '7.2.1511', 'memory': 129024, 'cpucore': 6, 'manufacturer': u'Dell Inc.', 'os': 'centos', 'uuid': u'4C4C4544-0048-4B10-8030-B2C04F483332'}

Posting data to https://td-device43.local/api/device/
[_] Waiting for threads to finish. Current thread count: 4
{'new_name': 'mysql-22', 'cpupower': 2799, 'name': 'mysql-22', 'serial_no': u'2HK0H32', 'hardware': u'PowerEdge R420', 'osverno': '3.10.0-327.13.1.el7.x86_64', 'cpucount': u'2', 'osver': '7.2.1511', 'memory': 129024, 'cpucore': 6, 'manufacturer': u'Dell Inc.', 'os': 'centos', 'uuid': u'4C4C4544-0048-4B10-8030-B2C04F483332'}
Status code: 200
{"msg": ["device added or updated", 72, "mysql-22", true, false], "code": 0}

Posting IP data to https://td-device43.local/api/ip/
{'device': u'mysql-22', 'macaddress': u'b0:83:fe:dc:c7:68', 'tag': u'bond0', 'ipaddress': u'10.5.228.34'}
Status code: 200
{"msg": ["ip added or updated", 178, "10.5.228.34", true, false], "code": 0}

Posting MAC data to https://td-device43.local/api/1.0/macs/
{'device': u'mysql-22', 'macaddress': u'b0:83:fe:dc:c7:68', 'port_name': u'bond0'}
Status code: 200
{"msg": ["mac address successfully added/updated", 54, "b0:83:fe:dc:c7:68", true, false], "code": 0}

Fetching IP addresses for device:  mysql-22
[_] Waiting for threads to finish. Current thread count: 4
200 {"ip_addresses": [{"subnet": "SITE_VLAN_228-10.5.228.0/24(Site infra)", "macaddress": "b0:83:fe:dc:c7:68", "subnet_id": 62, "ip": "10.5.228.34", "label": "bond0", "type": 1}]}
[_] Waiting for threads to finish. Current thread count: 1

[!] Done!