wifite sometimes does not recognize 3070

[LLH-l]

I use RTL3070 wireless network card on Oracle VM VirtualBox / VMware-workstation , it seems that sometimes wifite can't recognize 3070, this phenomenon sometimes occurs, sometimes it doesn't To solve this phenomenon, you need to repeat the action of plugging and unplugging the 3070 from the usb interface This dialing and inserting action needs to be repeated several times before it can be recognized once

┌──(root㉿kali)-[/home/kali] └─# wifite . . .´ · . . · . wifite2 2.5.8 : : : (¯) : : : a wireless auditor by derv82 . · /¯\ ´ · .´ maintained by kimocoder ` /¯¯¯\ ´ https://github.com/kimocoder/wifite2

[!] Warning: Recommended app pyrit was not found. install @ https://github.com/JPaulMora/Pyrit/wiki
[!] Warning: Recommended app hcxdumptool was not found. install @ apt install hcxdumptool
[!] Warning: Recommended app hcxpcapngtool was not found. install @ apt install hcxtools
[!] Conflicting processes: NetworkManager (PID 1035), wpa_supplicant (PID 1791)
[!] If you have problems: kill -9 PID or re-run wifite with --kill

Interface   PHY   Driver              Chipset                            

---

1. wlan0 phy0 rt2800usb Ralink Technology, Corp. RT2870/RT3070

[+] enabling monitor mode on wlan0... enabled wlan0mon

[+] Scanning. Found 0 target(s), 0 client(s). Ctrl+C when ready ^C
[!] Error: No targets found. You may need to wait longer, or you may have issues with your wifi card

[!] Exiting

[!] Note: Leaving interface in Monitor Mode! [!] To disable Monitor Mode when finished: airmon-ng stop wlan0mon

┌──(root㉿kali)-[/home/kali] └─# `

┌──(root㉿kali)-[~] └─# wifite . . .´ · . . · . wifite2 2.5.8 : : : (¯) : : : a wireless auditor by derv82 . · /¯\ ´ · .´ maintained by kimocoder ` /¯¯¯\ ´ https://github.com/kimocoder/wifite2

[!] Warning: Recommended app pyrit was not found. install @ https://github.com/JPaulMora/Pyrit/wiki [!] Warning: Recommended app hcxdumptool was not found. install @ apt install hcxdumptool [!] Warning: Recommended app hcxpcapngtool was not found. install @ apt install hcxtools

Interface   PHY   Driver              Chipset                                                                              

---

1. wlan0 phy4 rt2800usb Ralink Technology, Corp. RT2870/RT3070

[+] enabling monitor mode on wlan0... enabled wlan0mon

[+] Scanning. Found 0 target(s), 0 client(s). Ctrl+C when ready
[!] Error: No targets found. You may need to wait longer, or you may have issues with your wifi card

[!] Exiting

[!] Note: Leaving interface in Monitor Mode! [!] To disable Monitor Mode when finished: airmon-ng stop wlan0mon

┌──(root㉿kali)-[~] └─# `