Dror Eiger
Dror Eiger
OK, try it out with `--device_type fgl_b`. There might be more parameters you're interested in, please let me know.
Sure thing, you're most welcome. If you have an OpenHAB configuration, I can add it as a file here (like I did for [Home Assistant](../blob/master/hass/configuration.yaml) and [SmartThings](../blob/master/devicetypes/deiger/hisense-air-conditioner.src/hisense-air-conditioner.groovy)).
> > Sure thing, you're most welcome. > > If you have an OpenHAB configuration, I can add it as a file here (like I did for [Home Assistant](../blob/master/hass/configuration.yaml) and...
> Hi, I have about the same issue.... but fgl_b doesn't resolve my problem ;-) > Our Fijutsi UTY-TFSXW1 WiFi module returns > > HTTP/1.1 200 OK > Content-Type: application/json;...
If your setup is neither supervised nor HA OS, the add-on store is not available. You can set up the docker manually, by running `docker run deiger/aircon`.
Works really well:
Hey, will you be able to review this PR?
> I don't get the point to cascade two PIDs in the code. It doubles the PID loops and all the corresponding parameters. > > Cascading PIDs is relevant for...
It's an electric system, not water based, so it's just an on/off system. The mentioned temperature is the temperature measured under the floor - I have two DS18B20 sensors in...
I'm not sure how that would be easier. I don't really care for the floor temperature itself, besides preventing over-heating, so exposing another thermostat doesn't help. pidtuner.com works the same...