Dave Proffer

Baud rate of 2,000,000

12

I have a microcontroller that wants to connect at 20000000 baud. I am using a SparkFun FTDI usb to UART 3.3 volt device. I can use the aging CoolTerm v1.7.0...

Still having login failure with 0.1.9 version

3

I have removed .logi_circle-session.cache file and am pretty sure I running latest version 0.1.9 of: https://github.com/evanjd/python-logi-circle/tree/private-api any ideas on how I can generate more info and make progress? Thx! ```...

Spelling error in Application -> Notification and Dock section of menu. 'turend'

1

Thank you for an interesting and useful product. Still exploring it many features. In your menu, under the Notification and Dock section, you have a spelling error. I believe 'turend'...

Is it possible to wake up deep sleeping Tuya CBU either by time or button press ?

3

I am interested in creating a battery powered device that will wake up either via the DeepSleep command set to 5 minutes or if a button is pressed on the...

Find GPIO pins assigned to I2C bus number

2

This is not a bug in smbus2, rather looking for some help figuring out how the I2C bus ordinal is mapped to physical I2C busses. I have a Intel master...

Two different machines on same ethernet network segment as TabloTurned on debug log and nothing is shown in log. Both seem to stop at same point. If you play same...

focuser.py : OSError: [Errno 25] Inappropriate ioctl for device

5

with: Arducam 16MP Autofocus Raspberry Pi Camera Module I am getting the following error when trying to run your autofocus example. ``` Traceback (most recent call last): File "/home/pi/v4l2_utils.py", line...

libcamera-hello : Black screen with Arducam 16MP Autofocus attached via Arducam Cable Extension Kit on a Raspberry Pi 4

1

I am trying to attach one of your Arducam 16MP Autofocus cameras via the Arducam Cable Extension Kit on a Raspberry Pi 4 running latest RPi OS: Linux rpi 5.10.103-v7l+...

In Docker on Debian 12 : Exception: Use sudo to read '/dev/nvme0' SMART data

4

Under docker, even if I sudo docker run, I receive the following error for the disk info. Linux yippie-ha 6.1.0-18-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.76-1 (2024-02-01) x86_64 GNU/Linux ``` [2024-05-07...

Are the ESP32-C3 boards supported

3

I am not able to connect a ESP32-C3 board. When trying to connect one, I get the following message: ``` The device on the "/dev/cu.wchusbserial54F40144441" port is not compatible. ```...