SST80

SST80 copied to clipboard

1.2 version, resolved copper/trace clearances, support for 1/225/275/1 split

1

Right 2.75 bar stab screw holes interfere with some PCB cutouts for some cases, so those screw holes can be snapped off with mousebites. Some traces and vias in V1.1...

NCKiser

Alps keysets frequently use a stepped Caps Lock key with a stepped area of 1.5u, rather than the MX standard of 1.25u stepped area. The current release of this PCB...

countkrzysztof

Add version with spacebar stabilizers facing south?

1

There was an issue with a user swapping their broken PCB out with one of these SST80's and realizing that the stabilizers faced the opposite of those of the original...

CountKeepo