Cannot run docker image - no code found

[renmarq]

Hi, I've tried running docker container both latest (1.2.3) and 1.1.15 on a raspberrypi and for each version I receive the following error and the container doesn't start:

#
# Fatal error in , line 0
# unreachable code
#
#
#
#FailureMessage Object: 0x7ece866c

Usually I try to find solutions by myself but I'm stuck here as don't see any code in the github repository. Thanks for your help.

[dchesterton]

Which Raspberry Pi and OS are you using? I've had to sign an NDA unfortunately so the code can't be published.

[renmarq]

Thanks for your answer.

• Raspberry Pi 3 (armv7)
• Raspbian GNU/Linux 10 (buster)

Makes sense for the NDA.

In the meantime I've extracted app binary from docker file and I was able to run it by calling it directly:

➜  /tmp ./texecom2mqtt
2022-01-23 10:40:04 - INFO: Starting texecom2mqtt v1.2.3 (Node v16.13.0)...
2022-01-23 10:40:04 - INFO: Connected to alarm, sleeping for 2 seconds...
2022-01-23 10:40:06 - DEBUG: Executing serial number command
2022-01-23 10:40:06 - INFO: Connection ready
...

The issue lies within docker image for armv7 and was introduced in version 1.1.8. I can run 1.1.7 fine but 1.1.8 (and all versions above) gives same error. I'd say there is a dependency missing as it runs outside the container and also the image size has been seriously reduced between these two versions:

dchesterton/texecom2mqtt                            1.1.8              cbd6dc3a9f5a   6 weeks ago     82.3MB
dchesterton/texecom2mqtt                            1.1.7              c35258b32455   7 weeks ago     173MB

[renmarq]

Hi, do you have further thoughts on the issue? I'm happy to help. Thanks.

[renmarq]

I've done additional tests. if I export non-working docker image filesystem, chroot into it then run texecom2mqtt it works. I still cannot figure out why docker image is not working. Any thoughts?