Radio doesn't seem to take into account Frequency

[Windyo]

I bought a radio that was recommended as working for 303Mhz despite being listed at 404 originally.

Further to our other issue I did a few tests far away from another other noise, but the radio picks up nothing at all in the 300Mhz range, despite listing the frequency.

I do, however, get correct signals when doing tests at the 404Mhz range, even if the frequency si set up to be 303. I'm not sure if this is expected or if it indicates that the radio is not in fact using the frequency I specified.

[dbuezas]

As a sanity check, do you see any changes in rssi values as y change frequency? It may be that the rf circuitry is fine tuned for a different frequency and you are reading noise or harmonics

[dbuezas]

This works fine for me