David Buezas

(note that `refresh_interval: auto` doesn't actually work with statistics, it only triggers a request to the rest API

Hi! That would be a nice chip to add support for. I don't remember if the signature needs to be in reverse order. Maybe try what avrdude parameters are used...

I just checked and the atmega2560 uses a different protocol (stk500v2 instead of stk500). I don't think this will work

If you go too far into the past it can happen that one of the entities has more data points than the other one. I suggest: * Plot all entities...

Thanks! :)

Hey! The chip is probably stuck in transmission mode. Did you make sure to call "endTransmission" via a lambda after transmitting? Btw, I only tested it on esp8266, but it...

The complete yaml is any of the two yaml files in this repo. The cc1101.h file goes in the same folder as the yaml file. To pick arbitrary signals take...

Here's a utility to analyze raw signals btw: https://github.com/dbuezas/esphome-remote_receiver-oscilloscope

I haven't tried it with the esp32 myself, but somebody did in the issues of this repo, try searching in the issues of this repo :) Regarding the file, you'll...

Use GPIO numbers: https://esphome.io/devices/nodemcu_esp32.html?highlight=esp32+pins