Daniel Berlin
Daniel Berlin
First of all, thanks. Second, i think that's a reasonable position. You'd need this to do a reasonable job of that anyway. My use case is actually simple - i'm...
In case you are still interseted - i looked deeper at this, as I happen to have nrf5340 devices, and use mcumgr on them. The underlying cause is that the...
Because i was lazy and did it from the github UI, it didn't wrap the commit message properly. I'll fix it in a sec.
> while this does allow for compilation, it also exposes a lot of stringop-overread warnings for me (reading 511 bytes from a region of size 7) i'm assuming these can...
> Thank you for submitting a PR, pleas refer to point 3 in "What to expect in a review" in https://github.com/Klipper3d/klipper/blob/master/docs/CONTRIBUTING.md and provide a signed off by line. > >...
In order to satisfy all the views here, i just rewrote the PID controller to be online adaptive and adjust the P/I/D terms in response to error. This requires no...
One thing i'll flag as i close this out - our current PID controller is not really a PID controller, or at least, it does not function like a normal...
It is mostly plug and play: The Manta uses the old USB2 interface, so without enabling it on the CM5, you will get no USB through manta. On the CM4,...
So, does it work on another carrier board and just not the manta? Did you have a CM4 working on the manta and now a CM5 doesn't work? If so,...
Sure, if you have a webcam that is doing the encoding for you, and that format is okay for you, you won't pay any cost. Here the c270 is giving...