Choc-Spaced-Corne
Choc-Spaced-Corne copied to clipboard
davidphilipbarr
Explain the differences between versions
It would be nice if there was some more info on the different versions of these PCBs. In the README.md file for example.
For example, what's the difference between chocorne and chocorne-switch?
I had been wondering the same. After looking at the Kicad files I think I've now got it, but the 'Low' with those cut-outs has me scratching my head?
Chocorne Low - I have no idea. Chocorne-switch - Looks like the Chocorne, but with the addition of battery pads and a power switch. Chocorne - The base design, my guess based off the Corne Chocolate? Chocorne36-n!n - Specifically for the Nice!Nano. The board design is greatly simplified due to the N!N features.
I'm also wondering if these have been built/tested, or if they haven't but they should theoretically work?
The switch one has a power switch, the low one uses choc mini switches instead of choc v1 i know I should write docs, but i'm a bit tied up recently. The 36-n!n does not have diodes, so it's the only one that is wireless only and has different firmware.
As far as i am aware they have all been built with the exception of the 36-n!n, which i have built an earlier version of and have the zmk firmware for.
On Sat, 16 Jul 2022 at 22:47, Brausmith @.***> wrote:
I had been wondering the same. After looking at the Kicad files I think I've now got it, but the 'Low' with those cut-outs has me scratching my head?
I'm also wondering if these have been built/tested, or if they haven't but they should theoretically work?
— Reply to this email directly, view it on GitHub https://github.com/davidphilipbarr/Choc-Spaced-Corne/issues/1#issuecomment-1186301127, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAAW5MWOPV77PLDBAXQMP6TVUMUVNANCNFSM53G35UDQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>
@davidphilipbarr which version pcb are these based on? The v3, which to my understanding had improvements in regards to led support for easier assembly primarily, or the v2?
