PowerMax+ connection issues

[Almewty]

Hey, since the upgrade to the 0.9.6 versions I've been having some issues. There are two distinct issues:

1. It will not automatically engage PowerLink Mode. On 0.9.5 I had to enroll it once manually for PowerLink and afterwards it always worked. Since upgrading it needs to be manually enrolled after every reload (this will cause a fault in the visonic panel as the PowerLink connection can't be established, until I manually enroll). I rolled back to the 0.9.5 versions and establishing PowerLink mode works without problems.
2. The Integration gives up connecting to the ESP when the connection between HomeAssistant and the ESP I've got connected to the Panel is interrupted. It won't work again until reloading the integration which in turn forces me to manually enroll it again. Even if the connection is available again after a few minutes.

I currently don't have any logs for these isses as I downgraded to 0.9.5, I can try to gather some logs for 0.9.6 if needed but the constant faulting + need to manually re-enroll is preventing me from staying on 0.9.6.

Edit: I did try the dev_b0 branch, just to check if it might fix my problem. But on that branch I can't establish any connection, not even Standard Plus