dave0003

I just went through all of the instances on the instance list: https://aohub.httpjames.space/ And these are the instances that are still working: https://ao.vern.cc https://overflow.hostux.net https://ao.bloat.cat https://overflow.freedit.eu https://anonoverflow.hyperreal.coffee https://overflow.sudovanilla.org https://overflow.ducks.party https://ao.ngn.tf...

I'm also having the same issue with this latest kernel update on my NanoPi Neo. It was a fresh install I did last week, and I had also updated to...

@MichaIng My NanoPi Neo is the 512 MiB version. I just flashed the new bootloader with the procedure you gave, and it rebooted fine with the old kernel. I still...

I have an old USB UART adapter I used for something else, that I found and tried to hook up to my NanoPi Neo. I also wasn't able to get...

I looked into it some more and tried again. I'm still not able to get it to work. I think ttyS0 is for UART 0 and ttyS1 is for UART...

@MichaIng Whether connected at 115200 or 1500000, I don't get any output from anything and can't login. I used that graphic you linked to and carefully connected accordingly (RX to...

@MichaIng OK, I've got it working now! There were two things: I had the TX and RX swapped inadvertently, so I corrected that. And there was a 5v/3.3v jumper on...

I'm not attaching any power, just GND, TX, and RX. I think the 3.3v/5v jumper is for the TTL signal level. There are separate 3.3v and 5v output pins, but...

I applied the new kernel: `Linux pico 6.12.23-current-sunxi #1 SMP Thu Apr 10 12:39:41 UTC 2025 armv7l GNU/Linux` This time, it came up on the network and seems to be...

I noticed the same thing. You can modify site.py and add an extra camera.capture() before the "real" one to clear the buffer. For example: ``` @route('/foto') def foto(cs,v): # still...