darknessblade

@DJ-Specter Do you have the same issue with those Solar-flare temperature spikes?

@glcos I use the "Sonoff Zigbee 3.0 plus type E" with ZHA. Currently have changed the build in scedule to have everything set at 00:00 and 15C. Did this as...

Not sure waht causes that blank screen. it might be because you turned the thermostat OFF trough the off button/turn of heating which turns of the screen. Also a small...

@DJ-Specter the spikes happen when the device is ON Display/heat=ON Set-temp=below current temp Mode: Manual Automatic mode= all times= 00:00/ 15C Floor sensor=disabled

Caught the error in action:  It is only on HASS its side, as the thermostat itself does not show strange behavior or try to turn on even though...

@DJ-Specter The only way I can think of is that HASS needs to Ignore ALL inputs/data changes that are above 50C Like in my Image 2133C. would be cut off...

@DJ-Specter tried contacting the manufacturer/seller, for the tuya cluster information, but they do not want to give this information. Would it be possible to hardlock the max reported set-temp to...

@DJ-Specter True, luckily the thermostat has a roughly 10 second delay before activating the relay. so the 1MS "false positive" update isn't the biggest issue in terms of function, its...

> Fixed quirk at repo: https://github.com/jacekk015/zha_quirks > > All target room temp spikes over 50 degrees are not reported to HA. added it to my HASS, It looks to be...

Can verify I am only getting **DIPS** that drop the set_temp to 0-8C Still slightly annoying, but still better than spikes of 100MIL+, especially for logging data From the logs:...