darkdrgn2k

Moved to 14

bumped to latest because it would not compile anymore

Fixed and merged from dev to master sooj

> do you think your work in making prototype run tests on Raspbian can also be used for this? Its doable but a little trickier since the image is actually...

From a prototype perspective maybe drop the $ID stuff and run this as a separate service (more distinc uninstall line between ssb-web and ssb)

After building the image(`openwrt-lime-default-ar71xx-generic-librerouter-v1-squashfs-sysupgrade.bin`) I tried flashing it with LUCI and got the following error >The uploaded image file does not contain a supported format. Make sure that you choose...

To boot an LibreMesh image correctly you need to change a U-Boot parameter. To get into U-Boot connect a serial console Header J4 1 - VCC (optional) 2 - RX...

Because of issues with mesh-orange i built on prototype Working module for ipfs-pi-stream (streaming a raspberry pi camera over ipfs) https://github.com/tomeshnet/prototype-cjdns-pi/pull/158 The code needed to activate the camera has been...

At the moment we don't have much choice. also prototype at the moment is more stable, easier to debug and has a bit more resources I think this work can...

CJDNS/yggdrasil all work on Layer two so we have to be careful not the "bridge" the two antennas together. That would make a CJDNS/yggdrasil mesh where all devices are 1...