Daniel

I managed to get past this stupid 2023.12 crap by changing to this yaml example: command_line: - binary_sensor: name: docker01-ping-status command: 'ping -W 2 -c 5 192.168.1.200 > /dev/null 2>&1...

and 6.0

found you can get past that error if you enable and save with all the defaults listed and then make changes to ip, topic, username password etc it saves fine

Hehe yeah, only came across it as I spun up a new HA instance from scratch and checked the logs Sent from my iPhone On 6 Apr 2024, at 5:49 ...

I ended up using —break-system-packages

As of zero information on how it’s connected or what Ubiquiti hardware you have I am assuming you are connecting by wi-fi. If so then everything I am saying below...

Couple of things to test - Could be something to do with your buck converter, I know from experience raspberry pi and their cousins from other mothers can be problematic...

Just a thought, while the pi is powered by your buck converter, what’s the output voltage reading on the output of the buck converter?

Hi @ranjib This is the difference between Reef-Pi v5.3 and v6.0 is shown in the PH Graph Below. 

[reef-pi log.txt](https://github.com/reef-pi/reef-pi/files/10109932/reef-pi.log.txt) Attached is the log file from my reef-pi showing that the PH reading has been flawless. I have tried the following to no avail, each time with a...