Device not responding to status request

[barrtailor]

When I attempt to add my Tasmota flashed (8.3.1) NodeMCU to Tasmobackup I'm getting the following response: Device not responding to status request. I reviewed the console and it looks like the NodeMCU is rebooting when being queried by TasmoBackup.

[xbmcnut]

I'm getting the same when I request an add to a Tuya Dimmer flashed with 8.4.0.

00:00:00 CFG: Loaded from flash at F5, Count 3407
00:00:00 QPC: Flag 7E
00:00:00 CFG: CR 448/699, Busy 0
00:00:00 Script: nv=15, tv=1, vns=96, ram=300
00:00:00 SRC: Restart
00:00:00 var not found: Dimmer
00:00:00 Script: performs "SerialSend5 FF550005DC0A"
00:00:00 SRC: Rule
00:00:00 CMD: Group 0, Index 5, Command "SERIALSEND", Data "FF550005DC0A"
00:00:00 RSL: stat/tuya_dimmer/RESULT = {"SerialSend":"Done"}
00:00:00 Script: performs "Dimmer 0.00"
00:00:00 SRC: Rule
00:00:00 CMD: Group 0, Index 1, Command "DIMMER", Data "0.00"
00:00:00 RSL: tele/tuya_dimmer/STATE = {"Time":"1970-01-01T00:00:00","Uptime":"0T00:00:00","UptimeSec":0,"Heap":29,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":0,"MqttCount":0,"POWER":"OFF","Dimmer":0,"Fade":"OFF","Speed":1,"LedTable":"ON"}
00:00:00 RSL: stat/tuya_dimmer/RESULT = {"POWER":"OFF","Dimmer":0}
00:00:00 Project tasmota Master Bedroom Dimmer Version 8.4.0(tasmota)-2_7_3_2
00:00:00  > WiFi-Dimmer-Script-v1.0 <
00:00:00 Script: performs "Counter1 0"
00:00:00 SRC: Rule
00:00:00 CMD: Group 0, Index 1, Command "COUNTER", Data "0"

Restarts Tasmota device and times out. TasmoBackup version is 1.03.20 running as a Home Assistant add-on

[patrickdk77]

I'm not sure what could be the issue here. I added a delay so there would be a pause before each status request in 1.03.20 So since the issue is still happening, I don't think there is anything I can do to resolve it, as it's just a single request.

I don't have any devices doing this, using versions of tasmota from 7.1 to 8.4