bbs-fw

bbs-fw copied to clipboard

Bbs02b tuned to max 3000w and 50amp controller

3

Once i was using the original software i was getting 3000w peak. Now im getting max 1450w. The motor jas plenty of torque but i barely go over 30mph

Bafanger

Req: Android config tool

4

Would love to see an android config tool. Bluetooth communication would be possible with this cheap Ble Bluetooth to Uart Transceiver Module : https://www.go2tech.nl/winkel/componenten/at-09-bluetooth-4-0-ble-module-cc2540-cc2541/ addon: for now i'm going to...

rayholland

Hi Daniel, could you outline in the docu/wiki the differences to the original firmware? In addition I read on endless sphere somewhere, that some things (as like speed regulation) is...

tefod-zz

Power surging

14

Hello. I just installed the new firmware and tried it on a test drive. It appears my speed and amperage go up and down instead of saying steady. This happens...

Dweebur2

Add keep current option

2

This option exist in the original firmware which decreases motor power on pedal assist when approaching assist level target cadence. Configured in percent of assist level power to receive when...

danielnilsson9

Electric scooter style Cruise Control

4

Would it be possible to have this kind of cruise control as in the video? It works like this on most electric scooters and it is really simple and intuitive....

silenec

Sport mode sometimes switches to standard mode without command

4

I have noticed 2 occasions now where firmware has dropped from sport to standard without me giving required input which is PAS 0 + Light button. I was also not...

CitizenDev

Help quickly

16

I have a problem with my BBSHD. It happens more and more often that the motor simply starts to reduce the power for no reason, even though I have everything...

Larswagner1987

Hello currently we can limit the accelerator to a given speed in my standard mode at 6km/h . The problem currently is that if I want to pedal to mix...

kb79000

Shift sensor interrupt not working due to target current ramp down.

32

Hi so I’ve done some testing with the firmware using my shift sensor with a bbshd (52v 33amp) and I’ve found that because of the the Target current ramp down...

skeeterman007