inetbox.py

inetbox.py copied to clipboard

Hello, as I understand well, we can access to the clock but not set it. Is there a possibility to change the time of the panel since it would be...

florent314

_on_enable takes 2 positional arguments but 3 were given

4

Hi, I installed your software today following the readme file. When starting the truma_service, I get the following output: > andreas@raspberrypi:~ $ truma_service 2023-07-30 15:22:59,567 truma.main INFO started 2023-07-30 15:22:59,572...

AndreasL384

taken from https://github.com/mc0110/inetbox2mqtt/blob/6d9241d90906d3619b7ae39a729453872a695e64/src/main1.py and fitted into this project.

pkoevesdi

Installation failed

2

Hey guys, i got a error when installing truma_service (after test it). I get the following error while installation (truma_service --install) running as pi user: ```pi@raspberrypi:~ $ truma_service --install Traceback...

DenioD

Truma D6e

72

Hallo, ich habe deine Software nochmal auf einer neuen Raspi Installation aufgesetzt. Das Skript starte ich von Hand, den service habe ich erst gar nicht enabled. Wenn ich nun truma_service...

maseb24

inet.app ERROR Status buffer does not start with preamble, expected b'\x00\x1e\x00\x00"\xff\xff\xffT\x01', got b'\x00\x1e\x00\x00"\x00\x00\x00T\x01'

1

Hiya. It seems it is running and recognised by cp-plus but not reacting to the commands sent. On RPi4B, tried several uarts. "mosquitto_sub -t service/truma/cp_plus_status" shows "waiting", after few sec...

skrzypens

ALDE use case [validation + might be useful for others]

11

Hey I have an Alde system with a 3010 control panel (3010 413 but who also has the color version 3010 613 is in the same scenario) - this is...

stepir

Alde 3020 - Checksum error

8

Hi, firstly I wanted to say this is awesome work and thank you! I have installed the scripts and connected my pi to my Alde 3020 (connected to the boiler,...

wheelbarrow1980

Request: Package to run on ESP32 or 8266

1

Hi, Feature request. Given that power in motorhomes is at a premium, would it be possible to port this project to run on an ESP based low power board? IT...

dougle03

cp_plus_status always "waiting"

5

Hello, i get data for topic `service/truma/display_status` but `cp_plus_status` is always `waiting`. I tried RESET at CP Plus, but no change. Any idea ?

wolfganghuse