Daniel Golle

@mwarning exactly. Using the added `ucidef_*` handlers you set values in `/etc/board.json`. They are then later on used to populate `/etc/config/wireless` once wireless PHY is probed.

The series didn't apply any more for a long time already and afaik a different approach is on the way. I'm also a bit frustrated about this one, it'd be...

Sorry, I missed your reply confirming that everything is working. I will push it to the main tree then. Edit: Done 7dbac3433fef1af0f76a515e962db450c3407c19

FYI, this still applies also in Asterisk 20.8.2 in case no timing module is loaded. ``` Thread 207 "asterisk" received signal SIGSEGV, Segmentation fault. [Switching to LWP 30220] ast_timer_set_rate (handle=0x0,...

Ok, so surprisingly things were working just fine with 1.2.00.273012 but now with 1.2.00.360516 not any more. It looks like the new firmware still uses the same GPG encryption key...

> Any news on this subject? Did you have a go in your HW? I've tried now all the way: Restored factory flash content with Firmware 1.0.00, then updated to...

> The two important files seem to be: > > openwrt-23.05.0-mediatek-mt7622-linksys_e8450-ubi-initramfs-recovery.itb > openwrt-23.05.0-mediatek-mt7622-linksys_e8450-ubi-squashfs-sysupgrade.itb That's not the installer. If there aren't also the files `openwrt-23.05.0-mediatek-mt7622-linksys_e8450-ubi-initramfs-recovery-installer.itb` `openwrt-23.05.0-mediatek-mt7622-linksys_e8450-ubi-initramfs-recovery-installer_signed.itb` then something went wrong in...

> How do you restore factory flash with firmware 1.0.00? I restore the complete content of the flash from an earlier backup. To make it easier I got the serial...

> Is this guide the most current installation procedure? Yes. > Do I flash images from openwrt website (if so - which ones and in which order) or do I...

The password of the `root` user if what you can set in the Web-UI for user `admin`. No need to crack it ;)