danergo

Yes, understood, thank you. Ms now definitely not focusing on winbio any more, I think they prefer the Hello framework. But it is only available from ten, and is a...

Sorry, github usually doesnt send emails about mentions. I had partial success with this, it depends on what you need. If you open the session with system and default flag,...

I've used the https://github.com/JcBernack/WinBioNET/tree/master/WindowsFormsTest project from this repo. But I need to change the opensession to System, and Default, that's the only combo seems working nowadays.

Thx for the quick heads up! I can confirm, works as intended if I change the monitor from x to y scale while application is running. But that's not too...

I kindof "fixed" this with using "DpiChangedBeforeParent" and "DpiChangedAfterParent" events.

I found another very strange behavior: 2 displays: -250% (primary) -100% All fonts and lines (borders) MUST be manually rescaled to 100/250. I.e. font: 8.25F/2.5 to look correctly on the...

Similar! On the fly dpi change I could solved by manually setting all fonts and borders to their inital size * DeviceDpi/96. It worked perfectly, until a point my primary...

No worries, I'm going to summarize here all my findings. **Prerequisites:** - 2 displays with different scale (i.e their Dpi is different) - Compile the sample with DotNet SDK7 -...

@fredilarsen, @TPD95100: Isn't it ruining the charging to use the same button for these two functions? 1.) Open door flap (by sending RF) and 2.) Modifying resistor If cable isn't...

Note: I tried this: > dtoverlay=vc4-kms-v3d But ffmpeg still claims: > [h264_v4l2m2m @ 0x32cca020] Could not find a valid device > [h264_v4l2m2m @ 0x32cca020] can't configure decoder