Tesla-Front-Drive-Unit
Tesla-Front-Drive-Unit copied to clipboard
damienmaguire
Open Source Logic board to control the Tesla Model S Front Drive Unit
Just a suggestion for future safety - the lines between the STM32 and the PWM driver have no hardware pull-downs. As a consequence, at least on my board, all PWM...
I've got a SDU v6 logic board in front of me. It appears that my board has a Tag-Connect port, but this is not present in the v6 gerbers. Are...
I was testing a PCB that I just put together and noticed the capacitor C47 is not connected to ground. I looked the the schematic and it turns out that...
Suggestion on Open Inverter that an economiser circuit is added for Tesla contactors; https://openinverter.org/forum/viewtopic.php?f=13&t=131&p=4142#p4140
Hey, Got around to build your board (currently trying to program/flash) Found a issue The footprint area for the C35 part is smaller than the actual part (or the part...
Metadata
Owner
Metadata
Open Source Logic board to control the Tesla Model S Front Drive Unit