Battery-Emulator
Battery-Emulator copied to clipboard
This software enables EV battery packs to be used for stationary storage in combination with solar inverters.
Hei akku on toiminut 3 viikkoa. Heräte akusta oli virta loppunut.vaihdoin akun bms lähti päälle ja heti sammui. Nyt battery emulator näyttää akku tyhjä / alijännite. Mistä lähtisin vikaa etsimään?...
The total kWh number should be dynamic, according to how many batteries are joining in. Current implementation only uses battery 1 kWh numbers and sends this to the inverter
Hi, we are about 20 persons, who have an early ESS, which has a SAFT Lithium-Ion Battery System with 10 Synerion Moduls (max. 560V 25kWh) inside. A similar system is...
When i connect battery in main screen show System status: FAULT, but in Events nothing, when i disconnect pin 9 in events show battery empty and not can communication. What...
I noticed that the sort order for events is not as the column header says (last event). I'm running v 6.2.1 
Hello Guys, I have a BYD Battery and now want to expand it with another HV memory that communicates via Pylontech HV. Does that work with that? And how is...
### What The limits set in the Webserver are not applied on Solax CAN protocol. This should be added!
### What This PR adds improvements to SOC% reading for BYD Atto 3 batteries - Reading of SOC% via periodically transmitted CAN message - Detection of stuck SOC% - Event...
Hi. I have looked through all issues and have not found any mentioning Toyota / Lexus hybrid system batteries support. I know they are low capacity between 1 and 2...
At this point in the update process, the inverters are momentarily without battery voltage (contactors open on restart/update) and there may be a communications failure. For example, in Fronius these...