dak180
Model number missing from SAS drives
Requested dump of SAS drives. The report doesn't have the model number. Last test age doesn't line up with Multi-Report, but I'm not sure which report is correct.
Side note, github doesn't allow tgz file extensions, so I renamed to .zip.
@xeromist I would be interested to know how it works with the latest adjustments that were just pushed.
I'm out of town for the holiday weekend. Can check when I get back.
On Thu, Jul 4, 2024, 8:17 AM dak180 @.***> wrote:
@xeromist https://github.com/xeromist I would be interested to know how it works with the latest adjustments that were just pushed.
— Reply to this email directly, view it on GitHub https://github.com/dak180/FreeNAS-Report/issues/35#issuecomment-2209215660, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOJMFMPFIJ44RJQDFQK64IDZKVRQPAVCNFSM6AAAAABKGNVMIWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDEMBZGIYTKNRWGA . You are receiving this because you were mentioned.Message ID: @.***>
Running 24 SAS drives and with the latest script change(s) I am now receiving a valid model in the report, previously this model value was null/empty.
@FDrebin do you have SAS SSDs or any seagate drive the supports FARM logging?
@FDrebin do you have SAS SSDs or any seagate drive the supports FARM logging?
I have hitachi SAS HDDs, not sure they support FARM logging off hand.
@FDrebin smartctl -AxHi --log="xerror,error" --log="xselftest,selftest" --log="devstat" --log="farm" --log="envrep" --log="defects" --log="zdevstat" --log="genstats" --log="ssd" --log="background" --quietmode=noserial "/dev/${drive}" would tell you if you do.
@FDrebin
smartctl -AxHi --log="xerror,error" --log="xselftest,selftest" --log="devstat" --log="farm" --log="envrep" --log="defects" --log="zdevstat" --log="genstats" --log="ssd" --log="background" --quietmode=noserial "/dev/${drive}"would tell you if you do.
Edit : Sorry about formatting, I can't seem to get it right.
Output from your code :
$ sudo smartctl -AxHi --log="xerror,error" --log="xselftest,selftest" --log="devstat" --log="farm" --log="envrep" --log="defects" --log="zdevstat" --log="genstats" --log="ssd" --log="background" --quietmode=noserial "/dev/sdh"
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.29-production+truenas] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: HGST
Product: H7280A520SUN8.0T
Revision: PAG1
Compliance: SPC-4
User Capacity: 7,865,536,647,168 bytes [7.86 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
Formatted with type 1 protection
8 bytes of protection information per logical block
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device type: disk
Transport protocol: SAS (SPL-4)
Local Time is: Sat Jul 6 15:48:48 2024 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
Read Cache is: Enabled
Writeback Cache is: Disabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 34 C
Drive Trip Temperature: 85 C
Manufactured in week 43 of year 2016
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 47
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 2514
Elements in grown defect list: 0
Vendor (Seagate Cache) information
Blocks sent to initiator = 24897213607968768
FARM log (SCSI Log page 0x3d, sub-page 0x3) not supported
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 244 0 244 52245150 854087.906 0
write: 0 3 0 3 14958128 98014.999 0
verify: 0 1 0 1 280408 4.258 0
Non-medium error count: 0
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Completed - 188 - [- - -]
# 2 Background short Completed - 116 - [- - -]
# 3 Background short Completed - 44 - [- - -]
# 4 Background short Completed - 59600 - [- - -]
# 5 Background long Completed - 59561 - [- - -]
# 6 Background short Completed - 59456 - [- - -]
# 7 Background short Completed - 59408 - [- - -]
# 8 Background short Completed - 59336 - [- - -]
# 9 Background short Completed - 59264 - [- - -]
#10 Background long Completed - 59237 - [- - -]
#11 Background short Completed - 59120 - [- - -]
#12 Background short Completed - 59048 - [- - -]
#13 Background short Completed - 58952 - [- - -]
#14 Background short Completed - 58856 - [- - -]
#15 Background long Completed - 58804 - [- - -]
#16 Background short Completed - 58712 - [- - -]
#17 Background short Completed - 58664 - [- - -]
#18 Background short Completed - 58592 - [- - -]
#19 Background short Completed - 58520 - [- - -]
#20 Background long Completed - 58473 - [- - -]
Long (extended) Self-test duration: 68760 seconds [19.1 hours]
Background scan results log
Status: scan is active
Accumulated power on time, hours:minutes 205:58 [12358 minutes]
Number of background scans performed: 359, scan progress: 94.04%
Number of background medium scans performed: 359
General statistics and performance log page:
General access statistics and performance:
Number of read commands: 3538233055
Number of write commands: 1483989573
number of logical blocks received: 191435545213
number of logical blocks transmitted: 1668140442628
read command processing intervals: 0
write command processing intervals: 0
weighted number of read commands plus write commands: 0
weighted read command processing plus write command processing: 0
Idle time:
Idle time intervals: 3646536577
in seconds: 182326828.850
in hours: 50646.341
Protocol Specific port log page for SAS SSP
relative target port id = 1
generation code = 1
number of phys = 1
phy identifier = 0
attached device type: expander device
attached reason: SMP phy control function
reason: unknown
negotiated logical link rate: phy enabled; 6 Gbps
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=1
attached phy identifier = 18
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization count = 0
Phy reset problem count = 0
relative target port id = 2
generation code = 1
number of phys = 1
phy identifier = 1
attached device type: no device attached
attached reason: unknown
reason: power on
negotiated logical link rate: phy enabled; unknown
attached initiator port: ssp=0 stp=0 smp=0
attached target port: ssp=0 stp=0 smp=0
attached phy identifier = 0
Invalid DWORD count = 0
Running disparity error count = 0
Loss of DWORD synchronization count = 0
Phy reset problem count = 0
The FARM log (SCSI Log page 0x3d, sub-page 0x3) not supported tells you that it does not support FARM output. Interesting clock rollover on the tests there too.
Just glad I could provide some additional data. But thank you for fixing the SAS model data population.
I can also confirm that model numbers now appear in the most recent script release.