Cura no longer inserting "autolevel" command

[ArizonaClark]

It finally dawned on me that when I printed something that had been sliced with an older version of Cura, it was going through autoleveling but when I "resliced" the same object (to try a higher fill), the printer was NOT doing an autolevelling. This is leading to the Z being nearly 1mm too low. Using "more" on the earlier file (claims a slice date of 21-08-2015) and the latest one, I discovered that the following was missing:

G29 ;Run the auto bed leveling

Using a text editor I manually added it to the file sliced today, and it printed a lot better.

Printer is a Printrbot Model 1405 "Simple Makers Kit", controlled by a Raspberry Pi running an old version of Octoprint.

The Aug. 2015 slicing was done on a Windows XP machine, with a version of Cura installed around Mar. 2015. Today's attempt was with 15.04.6 (with auto-update enabled).

I spent some time trying to find a setting in Cura to enable autoleveling, but did not find one.

[ArizonaClark]

Realized I forgot to mention that today's attempt was running Cura under OS X El Capitan Version 10.11.6 on a MacBook Pro.

[Ghostkeeper]

Fixed in Cura 2.3: https://github.com/Ultimaker/Cura/blob/master/resources/definitions/printrbot_simple.def.json#L37

(It has a G29 command in the start g-code.)

[BagelOrb]

Download Cura 2.3 beta at software.ultimaker.com

2016-09-05 3:25 GMT+02:00 Ghostkeeper [email protected]:

Fixed in Cura 2.3: https://github.com/Ultimaker/ Cura/blob/master/resources/definitions/printrbot_simple.def.json#L37

(It has a G29 command in the start g-code.)

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/daid/LegacyCura/issues/1537#issuecomment-244640967, or mute the thread https://github.com/notifications/unsubscribe-auth/AIe9EZpNk_o6guv5ROS6IVZnxmvyW3dUks5qm2-bgaJpZM4J0czi .

Kind regards,

Tim Kuipers

Ultimaker BV

www.ultimaker.com