LegacyCura
LegacyCura copied to clipboard
daid
Unable to select more than one model on build plate
15.04.4 Windows 10 When loading multiple models, unable to select anything but the first model loaded. Click and drag anywhere in the workspace will move the first object. The only way to move focus is to right click, select "Split object into parts". and the focus changes to a different part/object Do this until the required part has focus. The problem after that is if you moved the part and need to move another part, as soon as you do the above process the first part is re-positioned. It does, however, seem to hold any size change you make, just not the position in the workspace.
Cura 15.04 has never really been tested on windows 10. I'm glad to present a totally new interface, which we are now arduously testing on several operating systems before it will be released. Cura 2 will be a lot better. Op 26 jan. 2016 22:09 schreef "Pete" [email protected]:
15044 Windows 10 When loading multiple models, unable to select anything but the first model loaded Click and drag anywhere in the workspace will move the first object The only way to move focus is to right click, select "Split object into parts" and the focus changes to a different part/object Do this until the required part has focus The problem after that is if you moved the part and need to move another part, as soon as you do the above process the first part is re-positioned It does, however, seem to hold any size change you make, just not the position in the workspace
— Reply to this email directly or view it on GitHub https://github.com/daid/Cura/issues/1407.
In general, this has been linked to color settings. I know this happens when you put your system in 16 bit color mode.
I had seen that as an issue in a different thread, but for me it broke after I installed Win 10. I don't think this has anything to do with my colour mode being too low, not that I can find where to adjust it in win 10 :-(
If you would play around with it we could inform other users of your findings. However, a totally new Cura GUI is being released in a month or so, so there is not much use in playing around with the settings. Op 29 jan. 2016 22:58 schreef "Pete" [email protected]:
Sorry, that previous message was for BagelOrb.....
— Reply to this email directly or view it on GitHub https://github.com/daid/Cura/issues/1407#issuecomment-176988113.
No worries, I'll wait it out then
Regards
Pete
On 2/1/2016 7:50 PM, Tim Kuipers wrote:
If you would play around with it we could inform other users of your findings. However, a totally new Cura GUI is being released in a month or so, so there is not much use in playing around with the settings. Op 29 jan. 2016 22:58 schreef "Pete" [email protected]:
Sorry, that previous message was for BagelOrb.....
— Reply to this email directly or view it on GitHub https://github.com/daid/Cura/issues/1407#issuecomment-176988113.
— Reply to this email directly or view it on GitHub https://github.com/daid/Cura/issues/1407#issuecomment-177858849.