dRAT3
dRAT3
Audio still not working, but output seems better: ``` [user@Laptop overwitch]$ overwitch-cli -n 0 -vv DEBUG:overwitch.c:258:(ow_get_usb_device_list): Found Analog Rytm MKI (bus 003, address 002, ID 1935:0008) DEBUG:engine.c:705:(ow_detach_driver): No kernel driver...
Might be something wrong on my end, btw I run a non systemd system. So not all the udev stuff was installed properly, could that have sonething to do with...
Yes, I see a bunch of them before the ratio comes up
o2p latency starts at -1ms then goes to 0ms and stays there, p2o latency stays at -1ms
```[user@Laptop ~]$ overwitch-cli -n 0 -v DEBUG:overwitch.c:358:(ow_get_device_desc_from_vid_pid): Failed to open file “/home/user/.config/overwitch/devices.json”: No such file or directory DEBUG:overwitch.c:364:(ow_get_device_desc_from_vid_pid): Falling back to /usr/local/share/overwitch/devices.json... DEBUG:overwitch.c:423:(ow_get_device_desc_from_vid_pid): Device with PID 8 found DEBUG:overwitch.c:257:(ow_get_usb_device_list): Found...
I am on version 0.4.0 from crates I'll try on 0.3.1
To be shure I used egui_cable = { git = "https://github.com/ryo33/egui_cable", branch = "main" } and now I run into 43 errors inside the egui_cable package Okay thanks I'll check...
Yes for shure, no problem at all, thx matey
This would be OP
Please fix this, it's annoying as hell, I have a bunch of node instances running for my language servers so I can't use killall, I have to use recursive shell...