cyring
AMD Ryzen 9950x freq incorrect
When single thread boosting occurs on 9950x, it goes all the way to 61 and seems to be off the chart while reporting 5676 in the upper left corner. I assume you have not yet added support for this cpu as it just released. I will keep using CoreFreq anyway hoping you will release an update soon to correct this.
Thanks.
@madoverlord40 Thank you for trying CoreFreq with your 9950X. This is indeed the first report I'm receiving and I will need a lot of traces to debug the state of progress.
Can you post the output of all options of the CLI. List them with option -h
At least:
corwfreq-cli -s
Like my 3950X
About frequency issue, I need a screenshot of the CLI. Select Tools in the Menu and choose CPU Select
Select your best Core, you can press z to find it the CPPC table (if available)
Your best Core should the max boosted frequency, please take a screenshot at that moment.
Processor [AMD Ryzen 9 9950X 16-Core Processor]
|- Architecture [Zen5/Granite Ridge]
|- Vendor ID [AuthenticAMD]
|- Microcode [0x0b40401a]
|- Signature [ BF_44]
|- Stepping [ 0]
|- Online CPU [ 32/ 32]
|- Base Clock [ 70.487]
|- Frequency (MHz) Ratio
Min 6202.86 < 88 >
Max 4299.71 < 61 >
|- Factory [100.000]
6100 [ 61 ]
|- Performance
TGT 4299.71 < 61 >
|- CPPC
Min 3453.87 < 49 >
Max 352.44 < 5 >
TGT AUTO < 0 >
|- Boost [ UNLOCK]
XFR 5286.53 [ 75 ]
CPB 5286.53 [ 75 ]
|- P-State
P1 6202.86 < 88 >
|- Uncore [ LOCK]
CLK 1057.31 [ 15 ]
MEM 2114.61 [ 30 ]
Instruction Set Extensions
|- 3DNow!/Ext [N/N] ADX [Y] AES [Y] AVX/AVX2 [Y/Y]
|- AVX512-F [Y] AVX512-DQ [Y] AVX512-IFMA [Y] AVX512-PF [N]
|- AVX512-ER [N] AVX512-CD [Y] AVX512-BW [Y] AVX512-VL [Y]
|- AVX512-VBMI [Y] AVX512-VBMI2 [Y] AVX512-VNNI [Y] AVX512-ALG [Y]
|- AVX512-VPOP [Y] AVX512-VNNIW [N] AVX512-FMAPS [N] AVX512-VP2I [Y]
|- AVX512-BF16 [Y] AVX-VNNI-VEX [Y] AVX-FP128 [N] AVX-FP256 [N]
|- BMI1/BMI2 [Y/Y] CLWB [Y] CLFLUSH [Y] CLFLUSH-OPT [Y]
|- CLAC-STAC [Y] CMOV [Y] CMPXCHG8B [Y] CMPXCHG16B [Y]
|- F16C [Y] FPU [Y] FXSR [Y] LAHF-SAHF [Y]
|- MMX/Ext [Y/Y] MON/MWAITX [Y/Y] MOVBE [Y] PCLMULQDQ [Y]
|- POPCNT [Y] RDRAND [Y] RDSEED [Y] RDTSCP [Y]
|- SEP [Y] SHA [Y] SSE [Y] SSE2 [Y]
|- SSE3 [Y] SSSE3 [Y] SSE4.1/4A [Y/Y] SSE4.2 [Y]
|- SERIALIZE [N] SYSCALL [Y] RDPID [Y] UMIP [Y]
|- VAES [Y] VPCLMULQDQ [Y] PREFETCH/W [Y] LZCNT [Y]
Features
|- 1 GB Pages Support 1GB-PAGES [Capable]
|- 100 MHz multiplier Control 100MHzSteps [Missing]
|- Advanced Configuration & Power Interface ACPI [Capable]
|- Advanced Programmable Interrupt Controller APIC [Capable]
|- Advanced Virtual Interrupt Controller AVIC [Missing]
|- APIC Timer Invariance ARAT [Capable]
|- LOCK prefix to read CR8 AltMov [Capable]
|- Clear Zero Instruction CLZERO [Capable]
|- Core Multi-Processing CMP Legacy [Capable]
|- L1 Data Cache Context ID CNXT-ID [Missing]
|- Collaborative Processor Performance Control CPPC [Capable]
|- Direct Cache Access DCA [Missing]
|- Debugging Extension DE [Capable]
|- Debug Store & Precise Event Based Sampling DS, PEBS [Missing]
|- CPL Qualified Debug Store DS-CPL [Missing]
|- 64-Bit Debug Store DTES64 [Missing]
|- Fast Short REP MOVSB FSRM [Capable]
|- Fast-String Operation ERMS [Capable]
|- Fused Multiply Add FMA4 [Missing]
|- Fused Multiply Add FMA [Capable]
|- Hardware Lock Elision HLE [Missing]
|- Hyper-Threading Technology HTT [Capable]
|- Hardware P-state control HwP [Capable]
|- Instruction Based Sampling IBS [Capable]
|- Instruction INVLPGB INVLPGB [Missing]
|- Instruction INVPCID INVPCID [Capable]
|- Long Mode 64 bits IA64 | LM [Capable]
|- LightWeight Profiling LWP [Missing]
|- Memory Bandwidth Enforcement MBE [Capable]
|- Machine-Check Architecture MCA [Capable]
|- Instruction MCOMMIT MCOMMIT [Missing]
|- Model Specific Registers MSR [Capable]
|- Memory Type Range Registers MTRR [Capable]
|- No-Execute Page Protection NX [Capable]
|- OS-Enabled Ext. State Management OSXSAVE [Capable]
|- OS Visible Work-around OSVW [Capable]
|- Physical Address Extension PAE [Capable]
|- Page Attribute Table PAT [Capable]
|- Pending Break Enable PBE [Missing]
|- Process Context Identifiers PCID [Missing]
|- Perfmon and Debug Capability PDCM [Missing]
|- Page Global Enable PGE [Capable]
|- Page Size Extension PSE [Capable]
|- 36-bit Page Size Extension PSE36 [Capable]
|- Processor Serial Number PSN [Missing]
|- Resource Director Technology/PQE RDT-A [Capable]
|- Resource Director Technology/PQM RDT-M [Capable]
|- Read Processor Register at User level RDPRU [Capable]
|- Restricted Transactional Memory RTM [Missing]
|- Safer Mode Extensions SMX [Missing]
|- Self-Snoop SS [Missing]
|- Supervisor-Mode Access Prevention SMAP [Capable]
|- Supervisor-Mode Execution Prevention SMEP [Capable]
|- Trailing Bit Manipulation TBM [Missing]
|- Translation Cache Extension TCE [Capable]
|- Time Stamp Counter TSC [Invariant]
|- Time Stamp Counter Deadline TSC-DEADLINE [Missing]
|- TSX Force Abort MSR Register TSX-ABORT [Missing]
|- TSX Suspend Load Address Tracking TSX-LDTRK [Missing]
|- User-Mode Instruction Prevention UMIP [Capable]
|- Virtual Mode Extension VME [Capable]
|- Virtual Machine Extensions VMX [Missing]
|- Write Back & Do Not Invalidate Cache WBNOINVD [Capable]
|- Extended xAPIC Support x2APIC [ xAPIC]
|- AVIC controller for x2APIC x2AVIC [Missing]
|- XSAVE/XSTOR States XSAVE [Capable]
|- xTPR Update Control xTPR [Missing]
|- Extended Operation Support XOP [Missing]
Mitigation mechanisms
|- Indirect Branch Restricted Speculation IBRS [Capable]
|- IBRS Always-On preferred by processor [ Unable]
|- IBRS preferred over software solution [Capable]
|- IBRS provides same speculation limits [Capable]
|- Indirect Branch Prediction Barrier IBPB [Capable]
|- Single Thread Indirect Branch Predictor STIBP [ Enable]
|- Speculative Store Bypass Disable SSBD [Capable]
|- SSBD use VIRT_SPEC_CTRL register [ Unable]
|- SSBD not needed on this processor [ Unable]
|- No Branch Type Confusion BTC_NO [Capable]
|- BTC on Non-Branch instruction BTC-NOBR [Capable]
|- Limited Early Redirect Window AGENPICK [ Unable]
|- Arch - No Fast Predictive Store Forwarding PSFD [Capable]
|- Arch - Enhanced Predictive Store Forwarding EPSF [Capable]
|- Arch - Cross Processor Information Leak XPROC_LEAK [ Unable]
Security Features
|- CET Shadow Stack features CET-SS [Capable]
|- Secure Init and Jump with Attestation SKINIT [Capable]
|- Secure Encrypted Virtualization SEV [Missing]
|- SEV - Encrypted State SEV-ES [Missing]
|- SEV - Secure Nested Paging SEV-SNP [Missing]
|- Guest Mode Execute Trap GMET [Capable]
|- Supervisor Shadow Stack SSS [Capable]
|- VM Permission Levels VMPL [Missing]
|- VMPL Supervisor Shadow Stack VMPL-SSS [Missing]
|- Secure Memory Encryption SME [Capable]
|- Transparent SME TSME [ Enable]
|- Secure Multi-Key Memory Encryption SME-MK [Missing]
|- DRAM Data Scrambling Scrambler [ Enable]
Technologies
|- Instruction Cache Unit
|- L1 IP Prefetcher L1 HW IP < ON>
|- Data Cache Unit
|- L1 Prefetcher L1 HW < ON>
|- Cache Prefetchers
|- L2 Prefetcher L2 HW < ON>
|- L1 Stride Prefetcher L1 Stride < ON>
|- L1 Region Prefetcher L1 Region < ON>
|- L1 Burst Prefetch Mode L1 Burst < ON>
|- L2 Stream HW Prefetcher L2 Stream < ON>
|- L2 Up/Down Prefetcher L2 Up/Down < ON>
|- System Management Mode SMM-Lock [ ON]
|- Simultaneous Multithreading SMT [ ON]
|- PowerNow! CnQ [ ON]
|- Core C-States CCx [ ON]
|- Core Performance Boost CPB < ON>
|- Watchdog Timer WDT < ON>
|- Virtualization SVM [ ON]
|- I/O MMU AMD-V [ ON]
|- Version [ 0.1]
|- Hypervisor [OFF]
|- Vendor ID [ N/A]
Performance Monitoring
|- Version PM [ 2]
|- Counters: General Fixed
| { 6, 4, 16 } x 48 bits 3 x 64 bits
|- Enhanced Halt State C1E <OFF>
|- C2 UnDemotion C2U < ON>
|- C3 UnDemotion C3U < ON>
|- Core C6 State CC6 < ON>
|- Package C6 State PC6 < ON>
|- Legacy Frequency ID control FID [OFF]
|- Legacy Voltage ID control VID [OFF]
|- P-State Hardware Coordination Feedback MPERF/APERF [ ON]
|- Core C-States
|- C-States Base Address BAR [ 0x413 ]
|- ACPI Processor C-States _CST [ 3]
|- MONITOR/MWAIT
|- State index: #0 #1 #2 #3 #4 #5 #6 #7
|- Sub C-State: 1 2 0 0 0 0 0 0
|- Monitor-Mwait Extensions EMX [Capable]
|- Interrupt Break-Event IBE [Capable]
|- Core Cycles [Capable]
|- Instructions Retired [Capable]
|- Reference Cycles [Capable]
|- Last Level Cache References [Capable]
|- Global Time Stamp Counter [Missing]
|- Data Fabric Performance Counter [Capable]
|- Core Performance Counter [Capable]
|- Processor Performance Control _PCT [ Enable]
|- Performance Supported States _PSS [ 2]
|- Performance Present Capabilities _PPC [ 0]
|- Continuous Performance Control _CPC [Missing]
Power, Current & Thermal
|- Temperature Offset:Junction TjMax [ 49: 95 C]
|- CPPC Energy Preference EPP < 0>
|- Digital Thermal Sensor DTS [Capable]
|- Power Limit Notification PLN [Missing]
|- Package Thermal Management PTM [Missing]
|- Thermal Monitor 1 TTP [ Enable]
|- Thermal Monitor 2 HTC [ Enable]
|- Thermal Design Power TDP [Missing]
|- Minimum Power Min [Missing]
|- Maximum Power Max [Missing]
|- Thermal Design Power Package [Disable]
|- Power Limit PL1 [ 0 W]
|- Time Window TW1 [ 0 ns]
|- Power Limit PL2 [ 0 W]
|- Time Window TW2 [ 0 ns]
|- Thermal Design Power Core [Disable]
|- Power Limit PL1 [ 0 W]
|- Time Window TW1 [ 0 ns]
|- Thermal Design Power Uncore [Disable]
|- Power Limit PL1 [ 0 W]
|- Time Window TW1 [ 0 ns]
|- Thermal Design Power DRAM [Disable]
|- Power Limit PL1 [ 0 W]
|- Time Window TW1 [ 0 ns]
|- Thermal Design Power Platform [Disable]
|- Power Limit PL1 [ 0 W]
|- Time Window TW1 [ 0 ns]
|- Power Limit PL2 [ 0 W]
|- Time Window TW2 [ 0 ns]
|- Package Power Tracking PPT [Missing]
|- Electrical Design Current EDC [Missing]
|- Thermal Design Current TDC [Missing]
|- Core Thermal Point
|- Package Thermal Point
|- Thermal Monitor Trip Limit [ 115 C]
|- HTC Temperature Limit Limit [ 127 C]
|- HTC Temperature Hysteresis Threshold [ 2 C]
|- Units
|- Power watt [ Missing]
|- Energy joule [ 0.000015259]
|- Window second [ 0.000976562]
I also noticed that if i leave CoreFreq running idle, and i walk away for a while, when i come back, the system is locked up and i have to power off/on. It boots right back into linux mint, but i test this. I left the pc on for 1HR without the program running, then with the program running, less than 30min later mouse wont move. I See [missing] in a lot of places above so i am wondering if that is enough info for you. I will try to get you a screen shot of best core boost when i am able to catch it doing that.
The baseclock BCLK can be fixed to 100 MHz with a driver parameter
insmod build/corefreqk.ko AutoClock=0
Or (if installed)
modprobe corefreqk AutoClock=0
Apparently the baseclock is wrongly updated to ~ 70 MHz
You can also try AutoClock=1 for a unique estimation and see if it makes a difference into the frequency issue.
Commonly motherboards mitigate electromigration with SPREAD SPECTRUM.
I'm disabling such feature in BIOS onto both CPU and Chipset.
As a result, the BXLK estimates closer to 100 MHz`
(tbc)
The frozen system issue could be due to an access conflict onto the SMU between CoreFreq and another Linux driver agent like k10temp, amd_pstate
You have to unload them or blacklist them during Linux startup.
It will help me if you can list all drivers with command lsmod
Also have a look to the Wiki/CoreFreq as the Clock Source, CPU Freq and CPU Idle driver
(tbc)
Im on a new install of Mint 22, all i have installed for additional drivers is LACT, if you are by chance not familiar with that, is a kernel driver level tool for my radeon 7900xtx. For some reason in linux the gpu fans wont kick on and use LACT to force them on. I can still get you an lsmod report if you still wish it, but i dont think it will help you. maybe LACT is conflicting with your software? Im going to go try out "insmod build/corefreqk.ko AutoClock=0" and see what the frequence does after that and ill report back.
Ok i just downloaded and ran passmarks performance test 11 for linux and ran a CPU benchmark. Here is a screen shot of what your software is reporting.
Considering my CPU score was 70k i dont think those values are correct. Here are my scores if it helps: CPU Mark: 70841 Integer Math 261614 Million Operations/s Floating Point Math 158501 Million Operations/s Prime Numbers 342 Million Primes/s Sorting 100243 Thousand Strings/s Encryption 51867 MB/s Compression 963377 KB/s CPU Single Threaded 4750 Million Operations/s Physics 4230 Frames/s Extended Instructions (SSE) 74945 Million Matrices/s
I do have PBO max and curve optimizer -20 in the bios. I also used the autoclock=0 on the insmod.
Ok i just realized that passmarks performance test has it wrong too. Check this out:
PassMark PerformanceTest Linux (11.0.1002) AMD Ryzen 9 9950X 16-Core Processor (x86_64) 16 cores @ 8007 MHz | 62.4 GiB RAM Number of Processes: 32 | Test Iterations: 1 | Test Duration: Medium
Maybe the kernel is miss-reporting max speed?
Ok i just installed latest kernel from mainline kernels 6.10.5 and now passmark shows this: AMD Ryzen 9 9950X 16-Core Processor (x86_64) 16 cores @ 5752 MHz | 62.4 GiB RAM Number of Processes: 32 | Test Iterations: 1 | Test Duration: Medium
and your software shows this:
I booted into windows 11 and ryzen master is showing this during passmark 11:
We need to know what's the reference base clock is ?
Aka BCLK, the baseclock has to be displayed in one of your UEFI/BIOS screen.
A 70 MHz rather than a usual 100 MHz is not impossible but that will be a premiere since a long time.
I would like also to see the TSC,UCC, URC counters.
Press c for such view or corefreq-cli -c
Btw, the computed voltage Vcore is wrong. As shown by Ryzen Master, it has to peak at 1.3 V
Can you replace this line of source code ?
https://github.com/cyring/CoreFreq/blob/8ca842b164f196d6205a401d469c3274315227e0/x86_64/coretypes.h#L611
with this line:
#define VOLTAGE_FORMULA_AMD_1Ah VOLTAGE_FORMULA_AMD_ZEN4
Save file then rebuild CoreFreq
make -j clean
make -j
Make sure to fully unload CoreFreq, especially its driver (rmmod corefreqk), before restarting it for the voltage test in a single Core fully stressed which has to trigger the PBO max Vcore-frequency.
Btw for all your next screenshots please switch to the custom view, press y key.
Or start with view selector option:
corefreq-cli -t custom
Also have you noticed that some CPU temperature of 96°C had exceeded the 95°C TjMax
Thanks @InstLatx64 MSR dump I see than the TSC seems decoralated from the base clock
------[ MSR Registers / Logical CPU #0 ]------
CPU Clock (Normal): 5760 MHz
CPU Clock (TSC): 4321 MHz
CPU Multiplier: 57.3x
4321 (MHz) / 57.3 = 75.4
Somehow as with arm processors, facial frequency is not the same as the TSC counter. The Window tools above may source the frequency from other sources; I bet the AMD PP tables.
The base clock in my bios is 100, you are correct. I didnt change that, however i am running EXPO at 6000, but i assume that has nothing to do with the base clock. As for the temp, yeah, i saw that it hit 96 and that should be impossible, i wonder however, im running PBO unlimited, might have pushed it past 95? I read somewhere one time that the sensors in the CPU only report up to 95 but the CPU could actually be above that if pegged out at max at the time and that some times other sensors can report higher. Just a thought, what do you think?
Ok ill go change the source code like you asked and ill report back. Thanks for your support!
other sensors can report higher. Just a thought, what do you think?
True, some are die sensors, others for the whole package. It's not that easy to guess which one is from without some Registers specifications.
Ok ill go change the source code like you asked and ill report back.
Great. Can't wait to see the results. Manufacturer always change the rules for their own reasons I believe...
Please also let me know about the accuracy of the measured Power in Watt.
Just press the w key and do two screenshots; when system is idle and when it is fully stressed.
Ok so i removed the module, and recompiled with the changes below:
//#define VOLTAGE_FORMULA_AMD_1Ah VOLTAGE_FORMULA_AMD_19_61h
#define VOLTAGE_FORMULA_AMD_1Ah VOLTAGE_FORMULA_AMD_ZEN4
In header file coretypes.h
I started your software with corefreq-cli -t custom with the below screen shot during passmark single thread test:
Although i cant really tell if your software is not reporting correctly or if its just not hitting PBO max being at 5.4 single thread, i think its supposed to be 5.7 in single thread.
Ok so i removed the module, and recompiled with the changes
Thank you.
To me, Vcore appears now in the range from a minimum 0.8 to a maximum 1.3 V
And current voltage looks to be per cluster CCX or CCD. This could explain why a single stressed CPU voltage is repeated among its cluster.
- Can you post the topology ?
corefreq-cli -m
The power measured per physical Core looks coherent.
I'm astonished by the total of 217 W.
9950X is said to be an efficient processor.
Although i cant really tell if your software is not reporting correctly or if its just not hitting PBO max being at 5.4 single thread, i think its supposed to be 5.7 in single thread.
That's why I claimed to use my integrated CPU stress Tools. They have been especially designed to trigger the boosted frequency-ies
- Press
Oto open the "Tools" window then choose "CPU Select..." option and select your best CPU. - If you ignore the best Core then you can choose either option "Round Robin" or option "Random CPU"
- You can then follow the max recorded frequency within the "Custom" view.
- You will see a red dot (right to the top LCD) when stress tools are active.
- You can stop at any time pressing the
F10function key. Dot will disappear when Tools stop. Conicsis the recommended algorithm to stress FPU. You should read the most consumed energy that you can monitor with the view "Power"
I can see that the UI is facing glitches. Those because of abnormal huge values within the absolute frequencies. So far I can't tell if regressions are part of this new architecture or the queried Registers have unpunished changes.
What about the memory controller ?
- Can you post the output of below options:
corefreq-cli -k -n -B -n -M
Regards CyrIng
./build/corefreq-cli -m topology.txt
Thank you. Looks good to me
Ok cool, so you have what you need to update your software for 9950x?
./build/corefreq-cli -k -n -B -n -M memory.txt
Thanks.
- Memory size is wrongly computed.
I believe the rank count of
F5-6400J3239G32G 4800 MHzrather than6400: does it have to be fixed ?- Can you tell if the timings are matching your BIOS values ?
Btw, in case you are not familiar with Markdown to post the output data;
- Type 3 anti-quotes followed by carriage return
- Type or copy/past the output data
- Type again 3 anti-quotes
Ok cool, so you have what you need to update your software for 9950x?
Yes I have minor fixes to provide in next version
./build/corefreq-cli -k -n -B -n -M memory.txt
Thanks.
* Memory size is wrongly computed. I believe the rank count of `F5-6400J3239G32G` * `4800 MHz` rather than `6400` : does it have to be fixed ? * Can you tell if the timings are matching your BIOS values ?Btw, in case you are not familiar with Markdown to post the output data;
1. Type 3 anti-quotes followed by carriage return 2. Type or copy/past the output data 3. Type again 3 anti-quotes
The ram is 6400 EXPO which will default to 4800 without EXPO on, but im running it at 6000 in bios, the ryzen sweet spot otherwise fabric clock ends up no longer 1:1:1 with mem clk and uclk. So it should be reading 3000 a channel.
... So it should be reading 3000 a channel.
The main issue is that the estimated BCLK of ~ 70 MHz is also messing with the DDR5 computed speed.
Can you please post the following:
corefreq-cli -c 3
./build/corefreq-cli -c 3
CPU Freq(MHz) Ratio Turbo C0(%) C1(%) C3(%) C6(%) C7(%) Min TMP:TS Max
000 39.63 ( 0.56) 0.92 0.95 99.05 0.00 0.00 0.00 32 / 36:680/ 95
001 166.16 ( 2.36) 3.86 3.40 96.60 0.00 0.00 0.00 32 / 36:680/ 95
002 67.90 ( 0.96) 1.58 1.50 98.50 0.00 0.00 0.00 32 / 36:680/ 95
003 14.74 ( 0.21) 0.34 0.47 99.53 0.00 0.00 0.00 32 / 36:680/ 95
004 45.99 ( 0.65) 1.07 1.08 98.92 0.00 0.00 0.00 32 / 36:687/ 95
005 19.18 ( 0.27) 0.45 0.51 99.49 0.00 0.00 0.00 32 / 36:680/ 95
006 10.83 ( 0.15) 0.25 0.32 99.68 0.00 0.00 0.00 32 / 36:680/ 95
007 52.32 ( 0.74) 1.22 0.93 99.07 0.00 0.00 0.00 32 / 36:680/ 95
008 0.45 ( 0.01) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 36:684/ 94
009 67.07 ( 0.95) 1.56 1.26 98.74 0.00 0.00 0.00 32 / 36:684/ 94
010 117.92 ( 1.67) 2.74 2.96 97.04 0.00 0.00 0.00 32 / 36:684/ 94
011 45.76 ( 0.65) 1.06 0.90 99.10 0.00 0.00 0.00 32 / 36:684/ 94
012 27.62 ( 0.39) 0.64 0.74 99.26 0.00 0.00 0.00 32 / 37:688/ 94
013 2.57 ( 0.04) 0.06 0.07 99.93 0.00 0.00 0.00 32 / 36:684/ 94
014 0.43 ( 0.01) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 37:688/ 94
015 0.55 ( 0.01) 0.01 0.02 99.98 0.00 0.00 0.00 32 / 36:684/ 94
016 18.10 ( 0.26) 0.42 0.48 99.52 0.00 0.00 0.00 32 / 36:680/ 95
017 54.33 ( 0.77) 1.26 1.19 98.81 0.00 0.00 0.00 32 / 36:683/ 95
018 19.90 ( 0.28) 0.46 0.44 99.56 0.00 0.00 0.00 32 / 36:687/ 95
019 0.50 ( 0.01) 0.01 0.02 99.98 0.00 0.00 0.00 32 / 36:687/ 95
020 54.28 ( 0.77) 1.26 1.17 98.83 0.00 0.00 0.00 32 / 36:680/ 95
021 2.23 ( 0.03) 0.05 0.08 99.92 0.00 0.00 0.00 32 / 36:683/ 95
022 1.18 ( 0.02) 0.03 0.04 99.96 0.00 0.00 0.00 32 / 36:680/ 95
023 1.46 ( 0.02) 0.03 0.03 99.97 0.00 0.00 0.00 32 / 36:683/ 95
024 33.25 ( 0.47) 0.77 0.65 99.35 0.00 0.00 0.00 32 / 36:684/ 94
025 10.87 ( 0.15) 0.25 0.25 99.75 0.00 0.00 0.00 32 / 36:684/ 94
026 8.32 ( 0.12) 0.19 0.16 99.84 0.00 0.00 0.00 32 / 36:684/ 94
027 19.10 ( 0.27) 0.44 0.43 99.57 0.00 0.00 0.00 32 / 36:684/ 94
028 0.27 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 36:684/ 94
029 42.56 ( 0.60) 0.99 1.23 98.77 0.00 0.00 0.00 32 / 36:684/ 94
030 0.27 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 36:684/ 94
031 5.75 ( 0.08) 0.13 0.18 99.82 0.00 0.00 0.00 32 / 36:684/ 94
Averages: Turbo C0(%) C1(%) C3(%) C6(%) C7(%) TjMax: Pkg:
0.81 0.75 99.25 0.00 0.00 0.00 95 C 37 C
CPU Freq(MHz) Ratio Turbo C0(%) C1(%) C3(%) C6(%) C7(%) Min TMP:TS Max
000 22.71 ( 0.32) 0.53 0.58 99.42 0.00 0.00 0.00 32 / 36:687/ 95
001 132.91 ( 1.89) 3.09 2.81 97.19 0.00 0.00 0.00 32 / 36:687/ 95
002 60.41 ( 0.86) 1.40 1.41 98.59 0.00 0.00 0.00 32 / 36:687/ 95
003 2.78 ( 0.04) 0.06 0.09 99.91 0.00 0.00 0.00 32 / 36:687/ 95
004 45.99 ( 0.65) 1.07 1.08 98.92 0.00 0.00 0.00 32 / 36:687/ 95
005 2.27 ( 0.03) 0.05 0.07 99.93 0.00 0.00 0.00 32 / 36:687/ 95
006 41.42 ( 0.59) 0.96 0.74 99.26 0.00 0.00 0.00 32 / 36:687/ 95
007 4.87 ( 0.07) 0.11 0.16 99.84 0.00 0.00 0.00 32 / 36:687/ 95
008 0.38 ( 0.01) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 36:684/ 94
009 40.41 ( 0.57) 0.94 0.84 99.16 0.00 0.00 0.00 32 / 36:684/ 94
010 117.92 ( 1.67) 2.74 2.96 97.04 0.00 0.00 0.00 32 / 36:684/ 94
011 87.98 ( 1.25) 2.05 2.35 97.65 0.00 0.00 0.00 32 / 36:684/ 94
012 27.62 ( 0.39) 0.64 0.74 99.26 0.00 0.00 0.00 32 / 37:688/ 94
013 6.28 ( 0.09) 0.15 0.14 99.86 0.00 0.00 0.00 32 / 37:688/ 94
014 0.43 ( 0.01) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 37:688/ 94
015 0.34 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 37:688/ 94
016 16.46 ( 0.23) 0.38 0.42 99.58 0.00 0.00 0.00 32 / 36:687/ 95
017 53.80 ( 0.76) 1.25 1.14 98.86 0.00 0.00 0.00 32 / 36:687/ 95
018 19.90 ( 0.28) 0.46 0.44 99.56 0.00 0.00 0.00 32 / 36:687/ 95
019 0.50 ( 0.01) 0.01 0.02 99.98 0.00 0.00 0.00 32 / 36:687/ 95
020 46.55 ( 0.66) 1.08 1.10 98.90 0.00 0.00 0.00 32 / 36:687/ 95
021 9.27 ( 0.13) 0.22 0.31 99.69 0.00 0.00 0.00 32 / 36:687/ 95
022 0.60 ( 0.01) 0.01 0.02 99.98 0.00 0.00 0.00 32 / 36:687/ 95
023 0.55 ( 0.01) 0.01 0.02 99.98 0.00 0.00 0.00 32 / 36:687/ 95
024 33.35 ( 0.47) 0.78 0.66 99.34 0.00 0.00 0.00 32 / 36:684/ 94
025 20.64 ( 0.29) 0.48 0.46 99.54 0.00 0.00 0.00 32 / 37:688/ 94
026 3.78 ( 0.05) 0.09 0.11 99.89 0.00 0.00 0.00 32 / 37:688/ 94
027 19.10 ( 0.27) 0.44 0.43 99.57 0.00 0.00 0.00 32 / 36:684/ 94
028 0.31 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 36:684/ 94
029 25.53 ( 0.36) 0.59 0.67 99.33 0.00 0.00 0.00 32 / 37:688/ 94
030 0.29 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 37:688/ 94
031 0.29 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 37:688/ 94
Averages: Turbo C0(%) C1(%) C3(%) C6(%) C7(%) TjMax: Pkg:
0.61 0.62 99.38 0.00 0.00 0.00 95 C 36 C
CPU Freq(MHz) Ratio Turbo C0(%) C1(%) C3(%) C6(%) C7(%) Min TMP:TS Max
000 19.59 ( 0.28) 0.46 0.49 99.51 0.00 0.00 0.00 32 / 36:683/ 95
001 115.28 ( 1.64) 2.68 2.60 97.40 0.00 0.00 0.00 32 / 36:683/ 95
002 50.17 ( 0.71) 1.17 1.28 98.72 0.00 0.00 0.00 32 / 36:683/ 95
003 2.83 ( 0.04) 0.07 0.09 99.91 0.00 0.00 0.00 32 / 36:683/ 95
004 48.27 ( 0.68) 1.12 1.27 98.73 0.00 0.00 0.00 32 / 36:683/ 95
005 25.91 ( 0.37) 0.60 0.72 99.28 0.00 0.00 0.00 32 / 36:683/ 95
006 59.88 ( 0.85) 1.39 1.05 98.95 0.00 0.00 0.00 32 / 36:683/ 95
007 0.81 ( 0.01) 0.02 0.03 99.97 0.00 0.00 0.00 32 / 36:683/ 95
008 0.26 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 37:688/ 94
009 31.21 ( 0.44) 0.73 0.64 99.36 0.00 0.00 0.00 32 / 37:688/ 94
010 20.91 ( 0.30) 0.49 0.42 99.58 0.00 0.00 0.00 32 / 37:688/ 94
011 26.93 ( 0.38) 0.63 0.82 99.18 0.00 0.00 0.00 32 / 37:688/ 94
012 3.65 ( 0.05) 0.08 0.11 99.89 0.00 0.00 0.00 32 / 37:688/ 94
013 6.55 ( 0.09) 0.15 0.16 99.84 0.00 0.00 0.00 32 / 37:688/ 94
014 4.36 ( 0.06) 0.10 0.14 99.86 0.00 0.00 0.00 32 / 37:688/ 94
015 0.30 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 37:688/ 94
016 11.19 ( 0.16) 0.26 0.31 99.69 0.00 0.00 0.00 32 / 36:683/ 95
017 53.36 ( 0.76) 1.24 1.37 98.63 0.00 0.00 0.00 32 / 36:683/ 95
018 12.66 ( 0.18) 0.29 0.34 99.66 0.00 0.00 0.00 32 / 36:683/ 95
019 0.26 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 36:683/ 95
020 42.75 ( 0.61) 0.99 1.04 98.96 0.00 0.00 0.00 32 / 36:683/ 95
021 2.86 ( 0.04) 0.07 0.09 99.91 0.00 0.00 0.00 32 / 36:683/ 95
022 0.88 ( 0.01) 0.02 0.02 99.98 0.00 0.00 0.00 32 / 36:687/ 95
023 0.57 ( 0.01) 0.01 0.02 99.98 0.00 0.00 0.00 32 / 36:687/ 95
024 31.07 ( 0.44) 0.72 0.62 99.38 0.00 0.00 0.00 32 / 37:688/ 94
025 5.65 ( 0.08) 0.13 0.13 99.87 0.00 0.00 0.00 32 / 37:688/ 94
026 11.89 ( 0.17) 0.28 0.30 99.70 0.00 0.00 0.00 32 / 37:688/ 94
027 10.26 ( 0.15) 0.24 0.33 99.67 0.00 0.00 0.00 32 / 37:688/ 94
028 0.25 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 37:688/ 94
029 0.25 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 37:688/ 94
030 0.23 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 37:688/ 94
031 0.25 ( 0.00) 0.01 0.01 99.99 0.00 0.00 0.00 32 / 37:688/ 94
Averages: Turbo C0(%) C1(%) C3(%) C6(%) C7(%) TjMax: Pkg:
0.44 0.45 99.55 0.00 0.00 0.00 95 C 37 C
Ok so using your turbo feature on core 5, ryzen master shows it to be a fast core with a white dot?
As for matching ram timings, i checked in bios, and booted into windows 11, this is ryzen master shows which matches bios: