stratux icon indicating copy to clipboard operation
stratux copied to clipboard

Published 20 hours ago • verified publisher icon cyoung

there is a problem is not small

Open JoAnyad opened this issue 2 years ago • 6 comments

  1. Stratux version:eu27

  2. Stratux config: 978 and 1090 RTL-SDR YES GPS NO 978 Mhz (UAT) YES 1090 Mhz (ADS-B/Mode-S ES) YES 868 Mhz (OGN) NO 162 MHz (AIS) YES AHRS Sensor YES Baro Sensor

    SDR

    • x ] single
    • [ ] dual

    GPS

    • [x ] yes
    • [ ] no type:

    AHRS

    • [x ] yes
    • [ ] no

    power source:

    usb cable:

  3. EFB app and version: (e.g., WingX Pro7 8.6.2)

    EFB platform: (e.g., iOS 9.2)

    EFB hardware: (e.g., iPad Mini 2)

  4. Description of your issue:

  5. has two SDRs. a 1090 and 978.

  6. I start the OGN turns off the GPS usb serial and when the 1090ES is turned on there is no OGN data sending

  7. disconnect from GPS i have been fighting like a pig on the ice for three months but i am very bored with this shit. If something is going to be good like WIFI then something is quite xar. the latest version of eu027 is above and the T-BEAM esp32-ogn-tracker-bin-10 + I flashed everything 2000x DE fos. Can someone tell me what's wrong? Or fuck me up? stratux.log.txt stratux_foto

If possible, enable "Replay Logs", reproduce the problem, and provide a copy of the logs in http://192.168.10.1/logs/stratux/ and http://192.168.10.1/logs/stratux.log.

JoAnyad avatar Dec 29 '21 22:12 JoAnyad

Almost certainly power delivery issue.

  • Which model of SDRs are you using?
  • Is the PI's red power LED constantly on (if not this indicates too low voltage/insufficient power supply)

Try a different USB power supply and a different cable. See also: https://github.com/b3nn0/stratux/discussions/137

b3nn0 avatar Dec 30 '21 08:12 b3nn0

Thanks for the quick response. The PI LED is flashing red, and now both LEDs are flashing continuously. I replaced the power supply (so far 1A) with 2A and the USB cable between PI and TTGO. There is improvement. In the settings, if I enable (turn on) 1090 Mhz (ADS-B / Mode-S ES), the OGN switches to disconnect on the status page. If I turn on anything (UAT, OGN, AIS, AHRS, BARO) then the OGN works flawlessly, but if I turn on 1090 Mhz (ADS-B / Mode-S ES) it is disconected. For example, when switching (978 Mhz (UAT)) it is disconnected for one second, then the OGN switches back on properly. I'm showing you the pictures. First image: Fully on all except 1090. Second: the 1090 is also turned on full1 only1

JoAnyad avatar Dec 30 '21 12:12 JoAnyad

If the red LED is not constantly on, there is not enough power. So that's always the first thing to make sure. I think there is a conflict in the configuration of your SDRs. I.e. Stratux wants to use both for the same protocol, which doesn't work. Can you post a log file? And again: which SDR model are you using?

b3nn0 avatar Dec 30 '21 12:12 b3nn0

The LEDs are constantly lit. GPS connection is stable :-) I am attaching the stratux.log file. I hope you thought so because you're a bunch of it :-) I'm attaching RTL-SDR pictures, I don't know which one. 20211230_172241 20211230_172324 20211230_172328 20211230_172436 20211230_172441 20211230_172503 20211230_172516 20211230_172624 20211230_172641 20211230_172714

JoAnyad avatar Dec 30 '21 16:12 JoAnyad

That explains it. The red one is the Stratux UAT radio and not an SDR. It can only be used for UAT. For OGN-RX you will need a second RTLSDR (e.g. nooelec nano 2+). Edit: or do you just want to transmit OGN (with limited rx capability, see wiki)? Then you can leave that OGN setting disabled. The TBeam does that independently.

b3nn0 avatar Dec 30 '21 17:12 b3nn0

Thanks again for the help! I ordered NooElec NESDR Nano 2+. He will arrive on Jan. 11. I hope this will be good. I am submitting the Stratux.log file because it was left behind yesterday. stratux.log.txt Would you like to see if there is any other problem? Happy New Year!

JoAnyad avatar Dec 31 '21 12:12 JoAnyad