SoftRF connection issue

[sixpack-de]

1. Stratux version: 1.6r1-eu021 2. Stratux config: only SoftRF connected, powered via PowerBank / Config file below 3. EFB app and version: N/A 4. Description of issue: Connected my SoftRF and it is not connecting (see screenshots)

Whenn SSH'ing into STRATUX I can see the device as cp210x converter attached to ttyUSB0

When I do a "stty -F /dev/flarm" (again and again) I get conflicting baudrates shown: 9600, 38400 & 115200 (IMHO this should be 38400)? When I set this to 38400 it will fluctuate again to 115200 (or 9600 or 38400) ...

When I do a head -4 on /dev/flarm (probably related to the changing baud rates?)

pi@raspberrypi:~ $ head -4 /dev/flarm 
*8E82F1A85805D1EA356E27A7CE02;
*8E82F1A85805D5598164423D5CA3;
*8E82F1A80918CE321B10784B8912;
*8E82F1A89900018030040090DA5C;
pi@raspberrypi:~ $ head -4 /dev/flarm 
?R!0?9?o)Bg???F?k
%cB%!?)J?1?%vA?X?Rs??"?B??!sg?  ?)%Rc1Z???%g@OJ0?"?Z??!sg))@??M?Cg?A?XC???"?Z??!sg?     ????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????*8E82F1A85805D1EA356E27A7CE02;
*8E82F1A85805D559816441C2B4B1;
*8E82F1A80918CE321B10784B8912;
*8E82F1A8990001805004005F5E27;
pi@raspberrypi:~ $ head -4 /dev/flarm 
)Jc1Z???%!????F?kLJ!?JH?)@B0?????%B!%4?????Cssg?+?)@B??????%g??????Csscc1?B@00SR)J??SFhh?#!9+B@BJB%     ????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????*8E82F1A85805E1EA356E27F63B22;
*8E82F1A85805E559816441934191;
*8E82F1A80918CE321B10784B8912;
*8E82F1A899000100300400915F3B;
pi@raspberrypi:~ $ 

I have a second Prime, but it shows the same behavior, so I guess I am doing a dumb mistake :)

THANKS for your help where to look!!

[b3nn0]

1. If you have an issue with Stratux EU, please open it there, not here. This feature has nothing to do with the pseudo-integration of SoftRF in Stratux-US.
2. Your setup is wrong. Stratux-EU uses the NMEA output from SoftRF, not dump1090 output. Set NMEA output to serial, disable GDL90 and dump1090 output.