cybern0id

My PAL SX-64 with U1541-II (non plus version) works fine with PHI1 and PHI2 recovery set to 200ns and PHI2 edge recovery set to enable. Have very occasionally had screen...

Apologies for the misconception and noise. My only defence is I assumed changing the timings helped because it fixed my issues but I also cleaned the edge connector at the...

NTSC or PAL SX-64? My 1541 Ultimate II (non plus) works fine with my PAL SX-64. Both 3.10j and the new 3.11 firmware. You might want to try carefully cleaning...

@GideonZ Ah, wow, thanks, I completely misunderstood. So these timings are for emulated cartridges in the U1541? I assumed the change in timings affected the menu when pressing the U1541...