New ESP setup, seems to stuck on Connection in progress

[BOMonsen]

New to ESPHome, this might have been a tough start. I hooked the ESP boards up to my HA, adpoted them and got that working. Set up the Bluetooth and Airthings BLE search to find the MAC adress. Flashed the following config.

esphome: name: "esphome-nr1"

esp32: board: esp32dev framework: type: arduino

Enable logging

logger: level: DEBUG

esp32_ble_tracker:

sensor:

• platform: airthings_wave_plus ble_client_id: airthings01 update_interval: 5min # default temperature: name: "WavePlus Temperature" radon: name: "WavePlus Radon" radon_long_term: name: "WavePlus Radon Long Term" pressure: name: "WavePlus Pressure" humidity: name: "WavePlus Humidity" co2: name: "WavePlus CO2" tvoc: name: "WavePlus VOC"

ble_client:

• mac_address: 80:6F:B0:38:F5:E5 id: airthings01

After a few hours, I still don't see any data from the Airthing plus. I checked the log, and the only thing I can see related to airthings are: [W][airthings_wave_plus:106]: Connection in progress

Any advice on progressing from this?