ble_monitor icon indicating copy to clipboard operation
ble_monitor copied to clipboard

Published 20 hours ago • verified publisher icon custom-components

[Bug]: Mi Scale V1 unavailable after HA Restart

Open Kaibob2 opened this issue 2 years ago • 7 comments

What happened?

This issue is quite similar to #326 and #366 I'm not sure when it stopped working, but I assume it was when I switched from YAML to UI Configuration for the BLE Monitor integration. It behaves like I already explained some time ago in the issues mentioned above. When HA is restarted all three entities from the Scale are unavailible afterwards. When I step on the scale all entitities appear and the non stabilized sensor starts jumping around. The problem here is, that the weight sensor appears with the last known value and triggers my automation with the "old" value. When the weight settles the weight sensor switches to the current weight and triggers my automation again. This time with the correct weight. Surely afterwards everything works fine until HA is restarted again.

I tried changing the "Restore after a restart" behaviour in the UI from default, to true or false. This has no impact at all.

Sensor type

MI Scale V1

Relevant log output

No response

Kaibob2 avatar May 27 '22 14:05 Kaibob2

Can you enable debug logging for BLE monitor and post the messages during the startup of HA (of BLE monitor) (especially the one with your config, which will be printed in the logs when you enable debug logging). I have a suspicion where the problem might be, but I need to check the logs

Ernst79 avatar May 27 '22 17:05 Ernst79

I enabled debug: this is right after a restart:

2022-05-27 19:36:07 DEBUG (MainThread) [custom_components.ble_monitor.bt_helpers] Response(header=<event_code=CommandCompleteEvent, controller_idx=0, param_len=283>, event_frame=<command_opcode=ReadControllerInformation, status=Success>, cmd_response_frame=<address=00:1A:7D:DA:71:03, bluetooth_version=6, manufacturer=10, supported_settings=114687, current_settings={Powered: True, Connectable: False, FastConnectable: False, Discoverable: False, Bondable: False, LinkLevelSecurity: False, SecureSimplePairing: True, BREDR: True, HighSpeed: False, LowEnergy: True, Advertising: False, SecureConnections: True, DebugKeys: False, Privacy: False, ControllerConfiguration: False, StaticAddress: False, PHYConfiguration: False, WidebandSpeech: False}, class_of_device=2883844, name=b'NUC', short_name=0>)
2022-05-27 19:36:07 DEBUG (MainThread) [custom_components.ble_monitor] Initializing BLE Monitor entry (config entry): <homeassistant.config_entries.ConfigEntry object at 0x7fdbbed62880>
2022-05-27 19:36:07 DEBUG (MainThread) [custom_components.ble_monitor] async_setup_entry: domain {}
2022-05-27 19:36:07 DEBUG (MainThread) [custom_components.ble_monitor] HCI interface is [0]
2022-05-27 19:36:07 DEBUG (MainThread) [custom_components.ble_monitor] async_setup_entry: {'bt_interface': ['00:1A:7D:DA:71:03'], 'bt_auto_restart': True, 'active_scan': False, 'discovery': False, 'period': 60, 'use_median': False, 'decimals': 1, 'log_spikes': False, 'restore_state': True, 'report_unknown': False, 'devices': [{'mac': 'A4:C1:38:1A:6D:AB', 'name': 'Badezimmer', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Badezimmer'}, {'mac': 'EC:4D:3E:C3:B4:26', 'name': 'Bewegungsmelder Bad', 'encryption_key': '4480a72dd30109a2467976aee16d022f', 'reset_timer': 2, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'decimals': 'default', 'report_unknown': False, 'use_median': 'default', 'tracker_scan_interval': 20, 'unique_id': 'Bewegungsmelder Bad'}, {'mac': '28:D1:27:24:11:5E', 'name': 'Bewegungsmelder Flur', 'encryption_key': '22da599a7e75df1e7413f0394f256733', 'reset_timer': 2, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'decimals': 'default', 'report_unknown': False, 'use_median': 'default', 'tracker_scan_interval': 20, 'unique_id': 'Bewegungsmelder Flur'}, {'mac': 'A4:C1:38:11:52:48', 'name': 'Fenster KZ links', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Fenster KZ links'}, {'mac': 'A4:C1:38:05:B0:FA', 'name': 'Fenster KZ rechts', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Fenster KZ rechts'}, {'mac': 'A4:C1:38:40:76:66', 'name': 'Fenster Kueche', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Fenster Kueche'}, {'mac': 'A4:C1:38:71:62:B4', 'name': 'Fenster SZ', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Fenster SZ'}, {'mac': 'A4:C1:38:99:EC:0E', 'name': 'Fenster WZ links', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Fenster WZ links'}, {'mac': 'A4:C1:38:40:FB:89', 'name': 'Fenster WZ rechts', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Fenster WZ rechts'}, {'mac': 'A4:C1:38:3E:F5:1B', 'name': 'Fenster Werkstatt', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Fenster Werkstatt'}, {'mac': 'A4:C1:38:08:70:06', 'name': 'Kinderzimmer', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Kinderzimmer'}, {'mac': 'A4:C1:38:5A:A9:FA', 'name': 'Kueche', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Kueche'}, {'mac': 'A4:C1:38:38:3B:50', 'name': 'Schlafzimmer', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Schlafzimmer'}, {'mac': 'C8:47:8C:C0:95:89', 'name': 'Waage', 'decimals': 2, 'use_median': False, 'restore_state': True, 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Waage', 'temperature_unit': '°C', 'delete device': False, 'uuid': ''}, {'mac': 'A4:C1:38:A7:68:25', 'name': 'Werkstatt', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Werkstatt'}, {'mac': 'A4:C1:38:24:0E:44', 'name': 'Wohnungstuere', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Wohnungstuere'}, {'mac': 'A4:C1:38:F2:DB:E9', 'name': 'Wohnzimmer', 'decimals': 1, 'use_median': False, 'restore_state': 'default', 'consider_home': 180, 'track_device': False, 'reset_timer': 35, 'report_unknown': False, 'tracker_scan_interval': 20, 'unique_id': 'Wohnzimmer'}], 'is_flow': True, 'hci_interface': [0]}
2022-05-27 19:36:07 DEBUG (MainThread) [custom_components.ble_monitor] Spawning HCIdump thread
2022-05-27 19:36:07 DEBUG (MainThread) [custom_components.ble_monitor] HCIdump thread: Init
2022-05-27 19:36:07 DEBUG (MainThread) [custom_components.ble_monitor] 2 encryptors mac:key pairs loaded
2022-05-27 19:36:07 DEBUG (MainThread) [custom_components.ble_monitor] sensor whitelist: [A4:C1:38:1A:6D:AB, EC:4D:3E:C3:B4:26, 28:D1:27:24:11:5E, A4:C1:38:11:52:48, A4:C1:38:05:B0:FA, A4:C1:38:40:76:66, A4:C1:38:71:62:B4, A4:C1:38:99:EC:0E, A4:C1:38:40:FB:89, A4:C1:38:3E:F5:1B, A4:C1:38:08:70:06, A4:C1:38:5A:A9:FA, A4:C1:38:38:3B:50, C8:47:8C:C0:95:89, A4:C1:38:A7:68:25, A4:C1:38:24:0E:44, A4:C1:38:F2:DB:E9]
2022-05-27 19:36:07 DEBUG (MainThread) [custom_components.ble_monitor] 17 sensor whitelist item(s) loaded
2022-05-27 19:36:07 DEBUG (MainThread) [custom_components.ble_monitor] 0 device tracker(s) being monitored
2022-05-27 19:36:07 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: Run
2022-05-27 19:36:07 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: BLEScanRequester._initialized is False for hci0,  waiting for connection...
2022-05-27 19:36:07 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: connected to hci0
2022-05-27 19:36:07 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: BLEScanRequester._initialized is True for hci0,  connection established, send_scan_request succeeded.
2022-05-27 19:36:07 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: start main event_loop
2022-05-27 19:36:08 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.xiaomi] Advertisement doesn't contain payload, adv: 0e1695fe1059f6071b5e112427d128
2022-05-27 19:36:09 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Starting binary sensor entry startup
2022-05-27 19:36:09 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] BLE binary sensors updater initialization
2022-05-27 19:36:09 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] BLE binary sensors updater initialized
2022-05-27 19:36:09 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor entry setup finished
2022-05-27 19:36:10 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary entities updater loop started!
2022-05-27 19:36:10 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.28, 'humidity': 58.59, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 135, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:10 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:3E:F5:1B has the following settings. Name: Fenster Werkstatt. Restore State: True. Reset Timer: 35
2022-05-27 19:36:10 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:3E:F5:1B has the following settings. Name: Fenster Werkstatt. Restore State: True. Reset Timer: 35
2022-05-27 19:36:11 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Starting measuring sensor entry startup
2022-05-27 19:36:11 DEBUG (MainThread) [custom_components.ble_monitor.sensor] BLE sensors updater initialization
2022-05-27 19:36:11 DEBUG (MainThread) [custom_components.ble_monitor.sensor] BLE sensors updater initialized
2022-05-27 19:36:11 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Measuring sensor entry setup finished
2022-05-27 19:36:11 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.66, 'humidity': 61.06, 'voltage': 2.794, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 89, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:11 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:F2:DB:E9 has the following settings. Name: Wohnzimmer. Restore State: True. Reset Timer: 35
2022-05-27 19:36:11 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:F2:DB:E9 has the following settings. Name: Wohnzimmer. Restore State: True. Reset Timer: 35
2022-05-27 19:36:11 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Entities updater loop started!
2022-05-27 19:36:11 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble opening Fenster Werkstatt
2022-05-27 19:36:11 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.73, 'humidity': 58.61, 'voltage': 2.76, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 22, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:11 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:A7:68:25 has the following settings. Name: Werkstatt. Restore State: True. Reset Timer: 35
2022-05-27 19:36:11 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:A7:68:25 has the following settings. Name: Werkstatt. Restore State: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.28, 'humidity': 58.59, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 135, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:3E:F5:1B has the following settings. Name: Fenster Werkstatt. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:3E:F5:1B has the following settings. Name: Fenster Werkstatt. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:3E:F5:1B has the following settings. Name: Fenster Werkstatt. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:3E:F5:1B has the following settings. Name: Fenster Werkstatt. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:3E:F5:1B has the following settings. Name: Fenster Werkstatt. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.35, 'humidity': 58.44, 'voltage': 2.931, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 94, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:05:B0:FA has the following settings. Name: Fenster KZ rechts. Restore State: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:05:B0:FA has the following settings. Name: Fenster KZ rechts. Restore State: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.66, 'humidity': 61.06, 'voltage': 2.794, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 89, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:F2:DB:E9 has the following settings. Name: Wohnzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:F2:DB:E9 has the following settings. Name: Wohnzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:F2:DB:E9 has the following settings. Name: Wohnzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:F2:DB:E9 has the following settings. Name: Wohnzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:F2:DB:E9 has the following settings. Name: Wohnzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.35, 'humidity': 51.31, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 7, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:71:62:B4 has the following settings. Name: Fenster SZ. Restore State: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:71:62:B4 has the following settings. Name: Fenster SZ. Restore State: True. Reset Timer: 35
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Fenster Werkstatt
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Fenster Werkstatt
2022-05-27 19:36:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble rssi Fenster Werkstatt
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.73, 'humidity': 58.61, 'voltage': 2.76, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 22, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:A7:68:25 has the following settings. Name: Werkstatt. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:A7:68:25 has the following settings. Name: Werkstatt. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:A7:68:25 has the following settings. Name: Werkstatt. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:A7:68:25 has the following settings. Name: Werkstatt. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:A7:68:25 has the following settings. Name: Werkstatt. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble opening Fenster KZ rechts
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.29, 'humidity': 58.59, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 136, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Wohnzimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble humidity Wohnzimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Wohnzimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble voltage Wohnzimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.35, 'humidity': 58.44, 'voltage': 2.931, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 94, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:05:B0:FA has the following settings. Name: Fenster KZ rechts. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:05:B0:FA has the following settings. Name: Fenster KZ rechts. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:05:B0:FA has the following settings. Name: Fenster KZ rechts. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:05:B0:FA has the following settings. Name: Fenster KZ rechts. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:05:B0:FA has the following settings. Name: Fenster KZ rechts. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble opening Fenster SZ
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.21, 'humidity': 61.65, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 164, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:38:3B:50 has the following settings. Name: Schlafzimmer. Restore State: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:38:3B:50 has the following settings. Name: Schlafzimmer. Restore State: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Werkstatt
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble humidity Werkstatt
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Werkstatt
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble voltage Werkstatt
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.35, 'humidity': 51.31, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 7, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:71:62:B4 has the following settings. Name: Fenster SZ. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:71:62:B4 has the following settings. Name: Fenster SZ. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:71:62:B4 has the following settings. Name: Fenster SZ. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:71:62:B4 has the following settings. Name: Fenster SZ. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:71:62:B4 has the following settings. Name: Fenster SZ. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.96, 'humidity': 56.82, 'voltage': 2.697, 'battery': 55, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 52, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:5A:A9:FA has the following settings. Name: Kueche. Restore State: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:5A:A9:FA has the following settings. Name: Kueche. Restore State: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Fenster KZ rechts
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Fenster KZ rechts
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble rssi Fenster KZ rechts
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.29, 'humidity': 58.59, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 136, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.25, 'humidity': 63.47, 'voltage': 2.631, 'battery': 47, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 151, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:1A:6D:AB has the following settings. Name: Badezimmer. Restore State: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:1A:6D:AB has the following settings. Name: Badezimmer. Restore State: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Fenster SZ
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Fenster SZ
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble rssi Fenster SZ
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.21, 'humidity': 61.65, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 164, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:38:3B:50 has the following settings. Name: Schlafzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:38:3B:50 has the following settings. Name: Schlafzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:38:3B:50 has the following settings. Name: Schlafzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:38:3B:50 has the following settings. Name: Schlafzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:38:3B:50 has the following settings. Name: Schlafzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.32, 'humidity': 58.36, 'voltage': 2.968, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 148, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:40:FB:89 has the following settings. Name: Fenster WZ rechts. Restore State: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:40:FB:89 has the following settings. Name: Fenster WZ rechts. Restore State: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.96, 'humidity': 56.82, 'voltage': 2.697, 'battery': 55, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 52, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:5A:A9:FA has the following settings. Name: Kueche. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:5A:A9:FA has the following settings. Name: Kueche. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:5A:A9:FA has the following settings. Name: Kueche. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:5A:A9:FA has the following settings. Name: Kueche. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:5A:A9:FA has the following settings. Name: Kueche. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Schlafzimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble humidity Schlafzimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Schlafzimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble voltage Schlafzimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble rssi Schlafzimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.25, 'humidity': 63.47, 'voltage': 2.631, 'battery': 47, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 151, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:1A:6D:AB has the following settings. Name: Badezimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:1A:6D:AB has the following settings. Name: Badezimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:1A:6D:AB has the following settings. Name: Badezimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:1A:6D:AB has the following settings. Name: Badezimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:1A:6D:AB has the following settings. Name: Badezimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble opening Fenster WZ rechts
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Kueche
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble humidity Kueche
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Kueche
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble voltage Kueche
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.32, 'humidity': 58.36, 'voltage': 2.968, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 148, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:40:FB:89 has the following settings. Name: Fenster WZ rechts. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:40:FB:89 has the following settings. Name: Fenster WZ rechts. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:40:FB:89 has the following settings. Name: Fenster WZ rechts. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:40:FB:89 has the following settings. Name: Fenster WZ rechts. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:40:FB:89 has the following settings. Name: Fenster WZ rechts. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Badezimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble humidity Badezimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Badezimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble voltage Badezimmer
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Fenster WZ rechts
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Fenster WZ rechts
2022-05-27 19:36:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble rssi Fenster WZ rechts
2022-05-27 19:36:14 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.29, 'humidity': 63.5, 'voltage': 2.607, 'battery': 45, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 152, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:14 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.29, 'humidity': 63.5, 'voltage': 2.607, 'battery': 45, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 152, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:16 DEBUG (MainThread) [custom_components.ble_monitor.device_tracker] Starting device tracker entry startup
2022-05-27 19:36:16 DEBUG (MainThread) [custom_components.ble_monitor.device_tracker] BLE device tracker updater initialization
2022-05-27 19:36:16 DEBUG (MainThread) [custom_components.ble_monitor.device_tracker] BLE device tracker updater initialized
2022-05-27 19:36:16 DEBUG (MainThread) [custom_components.ble_monitor.device_tracker] Device Tracker entry setup finished
2022-05-27 19:36:16 DEBUG (MainThread) [custom_components.ble_monitor.device_tracker] Device tracker updater loop started!
2022-05-27 19:36:16 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.65, 'humidity': 61.02, 'voltage': 2.795, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 90, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:16 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.65, 'humidity': 61.02, 'voltage': 2.795, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 90, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:17 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.7, 'humidity': 58.56, 'voltage': 2.754, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 23, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:17 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.7, 'humidity': 58.56, 'voltage': 2.754, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 23, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.35, 'humidity': 58.1, 'voltage': 2.962, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -63, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 66, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:99:EC:0E has the following settings. Name: Fenster WZ links. Restore State: True. Reset Timer: 35
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:99:EC:0E has the following settings. Name: Fenster WZ links. Restore State: True. Reset Timer: 35
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.35, 'humidity': 58.1, 'voltage': 2.962, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -63, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 66, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:99:EC:0E has the following settings. Name: Fenster WZ links. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:99:EC:0E has the following settings. Name: Fenster WZ links. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:99:EC:0E has the following settings. Name: Fenster WZ links. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:99:EC:0E has the following settings. Name: Fenster WZ links. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:99:EC:0E has the following settings. Name: Fenster WZ links. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble opening Fenster WZ links
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Fenster WZ links
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Fenster WZ links
2022-05-27 19:36:18 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble rssi Fenster WZ links
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.48, 'humidity': 58.27, 'voltage': 2.854, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -89, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 57, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:11:52:48 has the following settings. Name: Fenster KZ links. Restore State: True. Reset Timer: 35
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:11:52:48 has the following settings. Name: Fenster KZ links. Restore State: True. Reset Timer: 35
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.48, 'humidity': 58.27, 'voltage': 2.854, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -89, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 57, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:11:52:48 has the following settings. Name: Fenster KZ links. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:11:52:48 has the following settings. Name: Fenster KZ links. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:11:52:48 has the following settings. Name: Fenster KZ links. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:11:52:48 has the following settings. Name: Fenster KZ links. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:11:52:48 has the following settings. Name: Fenster KZ links. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble opening Fenster KZ links
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Fenster KZ links
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Fenster KZ links
2022-05-27 19:36:19 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble rssi Fenster KZ links
2022-05-27 19:36:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.23, 'humidity': 61.54, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 165, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.23, 'humidity': 61.54, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 165, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.98, 'humidity': 56.82, 'voltage': 2.683, 'battery': 53, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 53, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.98, 'humidity': 56.82, 'voltage': 2.683, 'battery': 53, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 53, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:22 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.34, 'humidity': 58.43, 'voltage': 2.931, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -85, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 96, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:22 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.34, 'humidity': 58.43, 'voltage': 2.931, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -85, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 96, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:23 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.28, 'humidity': 58.58, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 137, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:23 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.28, 'humidity': 58.58, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 137, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:24 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.23, 'humidity': 63.48, 'voltage': 2.633, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 153, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:24 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.23, 'humidity': 63.48, 'voltage': 2.633, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 153, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:24 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.72, 'humidity': 58.6, 'voltage': 2.76, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 24, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:24 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.72, 'humidity': 58.6, 'voltage': 2.76, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 24, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:25 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.34, 'humidity': 51.3, 'voltage': 2.953, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 8, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:25 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.34, 'humidity': 51.3, 'voltage': 2.953, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 8, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:26 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.36, 'humidity': 58.09, 'voltage': 2.963, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -63, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 67, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:26 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.36, 'humidity': 58.09, 'voltage': 2.963, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -63, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 67, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:26 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.2, 'humidity': 61.29, 'voltage': 2.913, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 166, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:26 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.2, 'humidity': 61.29, 'voltage': 2.913, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 166, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.76, 'humidity': 60.68, 'voltage': 2.968, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -86, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 62, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:08:70:06 has the following settings. Name: Kinderzimmer. Restore State: True. Reset Timer: 35
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:08:70:06 has the following settings. Name: Kinderzimmer. Restore State: True. Reset Timer: 35
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.76, 'humidity': 60.68, 'voltage': 2.968, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -86, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 62, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:08:70:06 has the following settings. Name: Kinderzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:08:70:06 has the following settings. Name: Kinderzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:08:70:06 has the following settings. Name: Kinderzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:08:70:06 has the following settings. Name: Kinderzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:08:70:06 has the following settings. Name: Kinderzimmer. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Kinderzimmer
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble humidity Kinderzimmer
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Kinderzimmer
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble voltage Kinderzimmer
2022-05-27 19:36:27 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble rssi Kinderzimmer
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'rssi': -76, 'mac': '28D12724115E', 'type': 'MJYD02YL', 'packet': 28, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'motion': 1, 'motion timer': 1, 'light': 1}
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address 28:D1:27:24:11:5E has the following settings. Name: Bewegungsmelder Flur. Restore State: True. Reset Timer: 2
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address 28:D1:27:24:11:5E has the following settings. Name: Bewegungsmelder Flur. Restore State: True. Reset Timer: 2
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'rssi': -76, 'mac': '28D12724115E', 'type': 'MJYD02YL', 'packet': 28, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'motion': 1, 'motion timer': 1, 'light': 1}
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address 28:D1:27:24:11:5E has the following settings. Name: Bewegungsmelder Flur. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 2
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address 28:D1:27:24:11:5E has the following settings. Name: Bewegungsmelder Flur. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 2
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.3, 'humidity': 58.32, 'voltage': 2.968, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -73, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 149, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.3, 'humidity': 58.32, 'voltage': 2.968, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -73, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 149, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble light Bewegungsmelder Flur
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble motion Bewegungsmelder Flur
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Bewegungsmelder Flur
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.98, 'humidity': 56.76, 'voltage': 2.695, 'battery': 55, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 54, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:28 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.98, 'humidity': 56.76, 'voltage': 2.695, 'battery': 55, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 54, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:29 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.65, 'humidity': 61.06, 'voltage': 2.794, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 91, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:29 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.65, 'humidity': 61.06, 'voltage': 2.794, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 91, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:31 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'rssi': -77, 'mac': '28D12724115E', 'type': 'MJYD02YL', 'packet': 29, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'motion': 1}
2022-05-27 19:36:31 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'rssi': -77, 'mac': '28D12724115E', 'type': 'MJYD02YL', 'packet': 29, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'motion': 1}
2022-05-27 19:36:33 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.28, 'humidity': 58.59, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 138, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:33 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.28, 'humidity': 58.59, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 138, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:33 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.31, 'humidity': 58.32, 'voltage': 2.968, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 150, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:33 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.31, 'humidity': 58.32, 'voltage': 2.968, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 150, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:34 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.xiaomi] Advertisement doesn't contain payload, adv: 0e1695fe1059f6071e5e112427d128
2022-05-27 19:36:34 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.23, 'humidity': 63.5, 'voltage': 2.63, 'battery': 47, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -68, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 154, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:34 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.23, 'humidity': 63.5, 'voltage': 2.63, 'battery': 47, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -68, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 154, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:34 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.33, 'humidity': 58.44, 'voltage': 2.93, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -85, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 97, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:34 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.33, 'humidity': 58.44, 'voltage': 2.93, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -85, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 97, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:36 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.66, 'humidity': 61.05, 'voltage': 2.798, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 92, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:36 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.66, 'humidity': 61.05, 'voltage': 2.798, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 92, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:36 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.46, 'humidity': 58.24, 'voltage': 2.856, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -89, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 59, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:36 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.46, 'humidity': 58.24, 'voltage': 2.856, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -89, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 59, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:37 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.74, 'humidity': 58.58, 'voltage': 2.758, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 25, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:37 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.74, 'humidity': 58.58, 'voltage': 2.758, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 25, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:38 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.21, 'humidity': 61.43, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 167, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:38 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.21, 'humidity': 61.43, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 167, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:38 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.96, 'humidity': 56.78, 'voltage': 2.693, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 55, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:38 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.96, 'humidity': 56.78, 'voltage': 2.693, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 55, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:40 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.31, 'humidity': 51.34, 'voltage': 2.955, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 10, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:40 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.31, 'humidity': 51.34, 'voltage': 2.955, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 10, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:40 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.3, 'humidity': 58.59, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 139, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:40 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.3, 'humidity': 58.59, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 139, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:42 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.34, 'humidity': 58.44, 'voltage': 2.934, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 98, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:42 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.34, 'humidity': 58.44, 'voltage': 2.934, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 98, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:43 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.34, 'humidity': 58.1, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 69, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:43 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.34, 'humidity': 58.1, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 69, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:46 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.32, 'humidity': 58.34, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -68, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 151, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:46 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.32, 'humidity': 58.34, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -68, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 151, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:46 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.2, 'humidity': 61.47, 'voltage': 2.916, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 168, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:46 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.2, 'humidity': 61.47, 'voltage': 2.916, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 168, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:46 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.25, 'humidity': 63.51, 'voltage': 2.634, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 155, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:46 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.25, 'humidity': 63.51, 'voltage': 2.634, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 155, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:51 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.31, 'humidity': 51.3, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -67, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 11, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:51 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.31, 'humidity': 51.3, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -67, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 11, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:51 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.28, 'humidity': 58.56, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 140, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:51 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.28, 'humidity': 58.56, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 140, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:51 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.32, 'humidity': 58.36, 'voltage': 2.971, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -68, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 152, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:51 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.32, 'humidity': 58.36, 'voltage': 2.971, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -68, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 152, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:51 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.93, 'humidity': 56.8, 'voltage': 2.686, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 56, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:51 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.93, 'humidity': 56.8, 'voltage': 2.686, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 56, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:55 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.26, 'humidity': 63.49, 'voltage': 2.613, 'battery': 45, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 156, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:55 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.26, 'humidity': 63.49, 'voltage': 2.613, 'battery': 45, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 156, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:56 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.35, 'humidity': 58.1, 'voltage': 2.962, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 70, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:56 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.35, 'humidity': 58.1, 'voltage': 2.962, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 70, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:57 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.73, 'humidity': 58.55, 'voltage': 2.758, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 27, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:57 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.73, 'humidity': 58.55, 'voltage': 2.758, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 27, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:58 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.2, 'humidity': 61.5, 'voltage': 2.916, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 169, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:58 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.2, 'humidity': 61.5, 'voltage': 2.916, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 169, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:58 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.96, 'humidity': 56.77, 'voltage': 2.687, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 57, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:58 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.96, 'humidity': 56.77, 'voltage': 2.687, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 57, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:59 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.64, 'humidity': 61.05, 'voltage': 2.796, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -58, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 94, 'firmware': 'ATC (Custom)'}
2022-05-27 19:36:59 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.64, 'humidity': 61.05, 'voltage': 2.796, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -58, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 94, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:03 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.3, 'humidity': 58.59, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 141, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:03 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.3, 'humidity': 58.59, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 141, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:04 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.76, 'humidity': 58.55, 'voltage': 2.757, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 28, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:04 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.76, 'humidity': 58.55, 'voltage': 2.757, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 28, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:05 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.18, 'humidity': 61.46, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 170, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.18, 'humidity': 61.46, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 170, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.3, 'humidity': 58.33, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -73, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 153, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.3, 'humidity': 58.33, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -73, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 153, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.05, 'humidity': 60.14, 'voltage': 2.97, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -87, 'mac': 'A4C138240E44', 'type': 'ATC', 'packet': 39, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:24:0E:44 has the following settings. Name: Wohnungstuere. Restore State: True. Reset Timer: 35
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:24:0E:44 has the following settings. Name: Wohnungstuere. Restore State: True. Reset Timer: 35
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.05, 'humidity': 60.14, 'voltage': 2.97, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -87, 'mac': 'A4C138240E44', 'type': 'ATC', 'packet': 39, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:24:0E:44 has the following settings. Name: Wohnungstuere. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:24:0E:44 has the following settings. Name: Wohnungstuere. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:24:0E:44 has the following settings. Name: Wohnungstuere. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:24:0E:44 has the following settings. Name: Wohnungstuere. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:24:0E:44 has the following settings. Name: Wohnungstuere. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble opening Wohnungstuere
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Wohnungstuere
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Wohnungstuere
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble rssi Wohnungstuere
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.65, 'humidity': 60.94, 'voltage': 2.799, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -57, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 95, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.65, 'humidity': 60.94, 'voltage': 2.799, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -57, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 95, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:07 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.25, 'humidity': 63.53, 'voltage': 2.615, 'battery': 46, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 157, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:07 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.25, 'humidity': 63.53, 'voltage': 2.615, 'battery': 46, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 157, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:08 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.34, 'humidity': 58.1, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 71, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:08 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.34, 'humidity': 58.1, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 71, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:08 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.94, 'humidity': 56.76, 'voltage': 2.693, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 58, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:08 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.94, 'humidity': 56.76, 'voltage': 2.693, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 58, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:08 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:37:09 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.46, 'humidity': 58.22, 'voltage': 2.853, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -88, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 62, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:09 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.46, 'humidity': 58.22, 'voltage': 2.853, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -88, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 62, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:10 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] 66 BLE advertisements processed for 14 binary sensor device(s)
2022-05-27 19:37:10 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.27, 'humidity': 51.2, 'voltage': 2.955, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 13, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:10 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.27, 'humidity': 51.2, 'voltage': 2.955, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 13, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:10 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.29, 'humidity': 58.58, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 142, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:10 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.29, 'humidity': 58.58, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 142, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:11 DEBUG (MainThread) [custom_components.ble_monitor.sensor] 68 BLE advertisements processed for 14 sensor device(s)
2022-05-27 19:37:11 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: main event_loop stopped, finishing.
2022-05-27 19:37:11 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: Scanning will be restarted
2022-05-27 19:37:11 DEBUG (Thread-3) [custom_components.ble_monitor] 1316 HCI events processed for previous period
2022-05-27 19:37:11 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: Run
2022-05-27 19:37:11 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: BLEScanRequester._initialized is False for hci0,  waiting for connection...
2022-05-27 19:37:11 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: connected to hci0
2022-05-27 19:37:11 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: BLEScanRequester._initialized is True for hci0,  connection established, send_scan_request succeeded.
2022-05-27 19:37:11 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: start main event_loop
2022-05-27 19:37:13 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.35, 'humidity': 58.04, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 72, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:13 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.35, 'humidity': 58.04, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 72, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:14 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.08, 'humidity': 60.36, 'voltage': 2.969, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C138240E44', 'type': 'ATC', 'packet': 40, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:14 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.08, 'humidity': 60.36, 'voltage': 2.969, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C138240E44', 'type': 'ATC', 'packet': 40, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:14 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.23, 'humidity': 63.53, 'voltage': 2.633, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 158, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:14 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.23, 'humidity': 63.53, 'voltage': 2.633, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 158, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:14 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.46, 'humidity': 58.22, 'voltage': 2.853, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -88, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 63, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:14 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.46, 'humidity': 58.22, 'voltage': 2.853, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -88, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 63, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:14 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.68, 'humidity': 58.62, 'voltage': 2.755, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 29, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:14 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.68, 'humidity': 58.62, 'voltage': 2.755, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 29, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:16 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.22, 'humidity': 61.48, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 171, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:16 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.22, 'humidity': 61.48, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 171, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:17 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.65, 'humidity': 60.9, 'voltage': 2.799, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -57, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 96, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:17 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.65, 'humidity': 60.9, 'voltage': 2.799, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -57, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 96, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:17 DEBUG (MainThread) [custom_components.ble_monitor.device_tracker] 0 BLE ADV messages processed last 60 seconds for 0 device tracker device(s)
2022-05-27 19:37:18 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.32, 'humidity': 58.33, 'voltage': 2.971, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -73, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 154, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:18 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.32, 'humidity': 58.33, 'voltage': 2.971, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -73, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 154, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:19 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.76, 'humidity': 60.68, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 67, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:19 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.76, 'humidity': 60.68, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 67, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:20 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.25, 'humidity': 51.22, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -67, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 14, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:20 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.25, 'humidity': 51.22, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -67, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 14, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:20 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.3, 'humidity': 58.56, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 143, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:20 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.3, 'humidity': 58.56, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 143, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.95, 'humidity': 56.76, 'voltage': 2.683, 'battery': 53, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 59, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.95, 'humidity': 56.76, 'voltage': 2.683, 'battery': 53, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 59, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:21 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.xiaomi] Advertisement doesn't contain payload, adv: 0e1695fe1059f607e526b4c33e4dec
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'rssi': -70, 'mac': 'EC4D3EC3B426', 'type': 'MJYD02YL', 'packet': 230, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'motion': 0}
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address EC:4D:3E:C3:B4:26 has the following settings. Name: Bewegungsmelder Bad. Restore State: True. Reset Timer: 2
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address EC:4D:3E:C3:B4:26 has the following settings. Name: Bewegungsmelder Bad. Restore State: True. Reset Timer: 2
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'rssi': -70, 'mac': 'EC4D3EC3B426', 'type': 'MJYD02YL', 'packet': 230, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'motion': 0}
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address EC:4D:3E:C3:B4:26 has the following settings. Name: Bewegungsmelder Bad. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 2
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address EC:4D:3E:C3:B4:26 has the following settings. Name: Bewegungsmelder Bad. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 2
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble light Bewegungsmelder Bad
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble motion Bewegungsmelder Bad
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Bewegungsmelder Bad
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.33, 'humidity': 56.71, 'voltage': 2.815, 'battery': 68, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -87, 'mac': 'A4C138407666', 'type': 'ATC', 'packet': 131, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:40:76:66 has the following settings. Name: Fenster Kueche. Restore State: True. Reset Timer: 35
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address A4:C1:38:40:76:66 has the following settings. Name: Fenster Kueche. Restore State: True. Reset Timer: 35
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.33, 'humidity': 56.71, 'voltage': 2.815, 'battery': 68, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -87, 'mac': 'A4C138407666', 'type': 'ATC', 'packet': 131, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:40:76:66 has the following settings. Name: Fenster Kueche. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:40:76:66 has the following settings. Name: Fenster Kueche. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:40:76:66 has the following settings. Name: Fenster Kueche. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:40:76:66 has the following settings. Name: Fenster Kueche. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address A4:C1:38:40:76:66 has the following settings. Name: Fenster Kueche. Temperature unit: °C. Decimals: 1. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble opening Fenster Kueche
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble temperature Fenster Kueche
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble battery Fenster Kueche
2022-05-27 19:37:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble rssi Fenster Kueche
2022-05-27 19:37:24 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.32, 'humidity': 56.67, 'voltage': 2.813, 'battery': 68, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C138407666', 'type': 'ATC', 'packet': 132, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:24 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.32, 'humidity': 56.67, 'voltage': 2.813, 'battery': 68, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C138407666', 'type': 'ATC', 'packet': 132, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:24 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.45, 'humidity': 58.25, 'voltage': 2.855, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -89, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 64, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:24 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.45, 'humidity': 58.25, 'voltage': 2.855, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -89, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 64, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:24 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.73, 'humidity': 60.66, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 68, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:24 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.73, 'humidity': 60.66, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 68, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:27 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.65, 'humidity': 60.89, 'voltage': 2.795, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -57, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 97, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:27 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.65, 'humidity': 60.89, 'voltage': 2.795, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -57, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 97, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:28 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.3, 'humidity': 58.4, 'voltage': 2.97, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 155, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:28 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.3, 'humidity': 58.4, 'voltage': 2.97, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 155, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:28 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.34, 'humidity': 58.07, 'voltage': 2.961, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 73, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:28 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.34, 'humidity': 58.07, 'voltage': 2.961, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 73, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:28 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.95, 'humidity': 56.76, 'voltage': 2.694, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 60, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:28 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.95, 'humidity': 56.76, 'voltage': 2.694, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 60, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:29 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.26, 'humidity': 63.52, 'voltage': 2.63, 'battery': 47, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -67, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 159, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:29 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.26, 'humidity': 63.52, 'voltage': 2.63, 'battery': 47, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -67, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 159, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:29 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.75, 'humidity': 58.6, 'voltage': 2.758, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 30, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:29 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.75, 'humidity': 58.6, 'voltage': 2.758, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 30, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:31 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.28, 'humidity': 58.57, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 144, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:31 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.28, 'humidity': 58.57, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 144, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:31 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.18, 'humidity': 61.53, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 172, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:31 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.18, 'humidity': 61.53, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 172, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:31 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.3, 'humidity': 58.61, 'voltage': 2.97, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -73, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 156, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:31 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.3, 'humidity': 58.61, 'voltage': 2.97, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -73, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 156, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:33 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.24, 'humidity': 51.17, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 15, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:33 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.24, 'humidity': 51.17, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 15, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:33 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.33, 'humidity': 58.03, 'voltage': 2.962, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 74, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:33 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.33, 'humidity': 58.03, 'voltage': 2.962, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 74, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:34 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.26, 'humidity': 63.53, 'voltage': 2.636, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 160, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:34 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.26, 'humidity': 63.53, 'voltage': 2.636, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 160, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:37 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.45, 'humidity': 58.26, 'voltage': 2.858, 'battery': 73, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -88, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 65, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:37 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.45, 'humidity': 58.26, 'voltage': 2.858, 'battery': 73, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -88, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 65, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:37 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.74, 'humidity': 60.67, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 69, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:37 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.74, 'humidity': 60.67, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 69, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:37 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.34, 'humidity': 58.4, 'voltage': 2.934, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 103, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:37 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.34, 'humidity': 58.4, 'voltage': 2.934, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 103, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:38 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.18, 'humidity': 61.49, 'voltage': 2.916, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 173, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:38 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.18, 'humidity': 61.49, 'voltage': 2.916, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 173, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:39 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.05, 'humidity': 59.91, 'voltage': 2.972, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -87, 'mac': 'A4C138240E44', 'type': 'ATC', 'packet': 42, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:39 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.05, 'humidity': 59.91, 'voltage': 2.972, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -87, 'mac': 'A4C138240E44', 'type': 'ATC', 'packet': 42, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:39 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.65, 'humidity': 60.88, 'voltage': 2.795, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -57, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 98, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:39 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.65, 'humidity': 60.88, 'voltage': 2.795, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -57, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 98, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:40 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.24, 'humidity': 51.18, 'voltage': 2.956, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 16, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:40 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.24, 'humidity': 51.18, 'voltage': 2.956, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 16, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:41 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.97, 'humidity': 56.77, 'voltage': 2.695, 'battery': 55, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 61, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:41 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.97, 'humidity': 56.77, 'voltage': 2.695, 'battery': 55, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 61, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:41 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.32, 'humidity': 58.64, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 157, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:41 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.32, 'humidity': 58.64, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 157, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:42 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.74, 'humidity': 58.64, 'voltage': 2.755, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 31, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:42 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.74, 'humidity': 58.64, 'voltage': 2.755, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 31, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:43 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.29, 'humidity': 58.59, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 145, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:43 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.29, 'humidity': 58.59, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 145, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:44 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.74, 'humidity': 58.59, 'voltage': 2.756, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 32, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:44 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.74, 'humidity': 58.59, 'voltage': 2.756, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 32, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:46 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.19, 'humidity': 61.5, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 174, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:46 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.19, 'humidity': 61.5, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 174, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:46 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.33, 'humidity': 58.02, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 75, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:46 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.33, 'humidity': 58.02, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 75, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:47 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.65, 'humidity': 60.87, 'voltage': 2.799, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 99, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:47 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.65, 'humidity': 60.87, 'voltage': 2.799, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 99, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:49 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.33, 'humidity': 56.57, 'voltage': 2.818, 'battery': 68, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C138407666', 'type': 'ATC', 'packet': 134, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:49 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.33, 'humidity': 56.57, 'voltage': 2.818, 'battery': 68, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C138407666', 'type': 'ATC', 'packet': 134, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:49 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.45, 'humidity': 58.26, 'voltage': 2.858, 'battery': 73, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -88, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 66, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:49 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.45, 'humidity': 58.26, 'voltage': 2.858, 'battery': 73, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -88, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 66, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:50 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.73, 'humidity': 60.67, 'voltage': 2.968, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 70, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:50 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.73, 'humidity': 60.67, 'voltage': 2.968, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 70, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:51 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.94, 'humidity': 56.78, 'voltage': 2.696, 'battery': 55, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 62, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:51 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.94, 'humidity': 56.78, 'voltage': 2.696, 'battery': 55, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 62, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:51 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.31, 'humidity': 58.63, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 158, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:51 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.31, 'humidity': 58.63, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 158, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:52 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.22, 'humidity': 63.54, 'voltage': 2.633, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -67, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 161, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:52 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.22, 'humidity': 63.54, 'voltage': 2.633, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -67, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 161, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:53 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.22, 'humidity': 51.19, 'voltage': 2.952, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 17, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:53 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.22, 'humidity': 51.19, 'voltage': 2.952, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 17, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:53 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.36, 'humidity': 58.03, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 76, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:53 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.36, 'humidity': 58.03, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 76, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:54 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.44, 'humidity': 58.23, 'voltage': 2.853, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -86, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 67, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:54 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.44, 'humidity': 58.23, 'voltage': 2.853, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -86, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 67, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:55 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.75, 'humidity': 58.6, 'voltage': 2.758, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 33, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:55 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.75, 'humidity': 58.6, 'voltage': 2.758, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 33, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:57 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.24, 'humidity': 63.54, 'voltage': 2.605, 'battery': 45, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 162, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:57 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.24, 'humidity': 63.54, 'voltage': 2.605, 'battery': 45, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 162, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:57 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.64, 'humidity': 60.89, 'voltage': 2.795, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -56, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 100, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:57 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.64, 'humidity': 60.89, 'voltage': 2.795, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -56, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 100, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:58 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.29, 'humidity': 58.53, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 146, 'firmware': 'ATC (Custom)'}
2022-05-27 19:37:58 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.29, 'humidity': 58.53, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 146, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:00 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.22, 'humidity': 51.18, 'voltage': 2.958, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 18, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:00 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.22, 'humidity': 51.18, 'voltage': 2.958, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 18, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:01 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.93, 'humidity': 56.73, 'voltage': 2.695, 'battery': 55, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 63, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:01 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.93, 'humidity': 56.73, 'voltage': 2.695, 'battery': 55, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 63, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:02 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.33, 'humidity': 58.4, 'voltage': 2.932, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 106, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:02 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.33, 'humidity': 58.4, 'voltage': 2.932, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 106, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:03 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.3, 'humidity': 58.56, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 147, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:03 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.3, 'humidity': 58.56, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 147, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:03 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.35, 'humidity': 58.05, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 77, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:03 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.35, 'humidity': 58.05, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 77, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:03 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.32, 'humidity': 58.71, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 159, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:03 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.32, 'humidity': 58.71, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 159, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:06 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.2, 'humidity': 61.49, 'voltage': 2.916, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 176, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.2, 'humidity': 61.49, 'voltage': 2.916, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 176, 'firmware': 'ATC (Custom)'}

And this is after i stepped on the scale and the "issue" appears:

2022-05-27 19:38:55 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.33, 'humidity': 58.43, 'voltage': 2.928, 'battery': 80, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 111, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:55 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.33, 'humidity': 58.43, 'voltage': 2.928, 'battery': 80, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 111, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:57 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.64, 'humidity': 61.05, 'voltage': 2.793, 'battery': 65, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 106, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:57 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.64, 'humidity': 61.05, 'voltage': 2.793, 'battery': 65, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 106, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:57 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.72, 'humidity': 58.55, 'voltage': 2.756, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 39, 'firmware': 'ATC (Custom)'}
2022-05-27 19:38:57 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.72, 'humidity': 58.55, 'voltage': 2.756, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 39, 'firmware': 'ATC (Custom)'}
ture': 23.89, 'humidity': 56.71, 'voltage': 2.69, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 69, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:03 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.89, 'humidity': 56.71, 'voltage': 2.69, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 69, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:04 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.28, 'humidity': 58.61, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 153, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:04 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.28, 'humidity': 58.61, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 153, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:05 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.73, 'humidity': 60.67, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 78, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:05 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.73, 'humidity': 60.67, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 78, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:05 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.73, 'humidity': 58.5, 'voltage': 2.76, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 40, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:05 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.73, 'humidity': 58.5, 'voltage': 2.76, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 40, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:06 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.2, 'humidity': 61.51, 'voltage': 2.913, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 182, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.2, 'humidity': 61.51, 'voltage': 2.913, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 182, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:06 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.34, 'humidity': 58.07, 'voltage': 2.962, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 83, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:06 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.34, 'humidity': 58.07, 'voltage': 2.962, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 83, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:07 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.xiaomi] Advertisement doesn't contain payload, adv: 0e1695fe1059f607e726b4c33e4dec
2022-05-27 19:39:07 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'rssi': -83, 'mac': 'EC4D3EC3B426', 'type': 'MJYD02YL', 'packet': 232, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'illuminance': 1, 'light': 0}
2022-05-27 19:39:07 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'rssi': -83, 'mac': 'EC4D3EC3B426', 'type': 'MJYD02YL', 'packet': 232, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'illuminance': 1, 'light': 0}
2022-05-27 19:39:09 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.1, 'humidity': 58.75, 'voltage': 2.969, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -88, 'mac': 'A4C138240E44', 'type': 'ATC', 'packet': 51, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:09 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.1, 'humidity': 58.75, 'voltage': 2.969, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -88, 'mac': 'A4C138240E44', 'type': 'ATC', 'packet': 51, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:10 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.26, 'humidity': 63.58, 'voltage': 2.637, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 169, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:10 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.26, 'humidity': 63.58, 'voltage': 2.637, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -69, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 169, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:11 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] 66 BLE advertisements processed for 16 binary sensor device(s)
2022-05-27 19:39:11 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.13, 'humidity': 51.26, 'voltage': 2.955, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 25, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:11 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.13, 'humidity': 51.26, 'voltage': 2.955, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 25, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:12 DEBUG (MainThread) [custom_components.ble_monitor.sensor] 66 BLE advertisements processed for 16 sensor device(s)
2022-05-27 19:39:12 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: main event_loop stopped, finishing.
2022-05-27 19:39:12 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: Scanning will be restarted
2022-05-27 19:39:12 DEBUG (Thread-3) [custom_components.ble_monitor] 1189 HCI events processed for previous period
2022-05-27 19:39:12 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: Run
2022-05-27 19:39:12 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: BLEScanRequester._initialized is False for hci0,  waiting for connection...
2022-05-27 19:39:12 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: connected to hci0
2022-05-27 19:39:12 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: BLEScanRequester._initialized is True for hci0,  connection established, send_scan_request succeeded.
2022-05-27 19:39:12 DEBUG (Thread-3) [custom_components.ble_monitor] HCIdump thread: start main event_loop
2022-05-27 19:39:14 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.09, 'humidity': 58.33, 'voltage': 2.968, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C138240E44', 'type': 'ATC', 'packet': 52, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:14 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.09, 'humidity': 58.33, 'voltage': 2.968, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C138240E44', 'type': 'ATC', 'packet': 52, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:15 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.33, 'humidity': 58.44, 'voltage': 2.931, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -86, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 113, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:15 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.33, 'humidity': 58.44, 'voltage': 2.931, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -86, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 113, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:16 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.2, 'humidity': 61.5, 'voltage': 2.917, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 183, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:16 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.2, 'humidity': 61.5, 'voltage': 2.917, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 183, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:16 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.92, 'humidity': 56.7, 'voltage': 2.686, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 70, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:16 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.92, 'humidity': 56.7, 'voltage': 2.686, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 70, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:16 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.33, 'humidity': 58.08, 'voltage': 2.961, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 84, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:16 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.33, 'humidity': 58.08, 'voltage': 2.961, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 84, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:17 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'rssi': -76, 'mac': '28D12724115E', 'type': 'MJYD02YL', 'packet': 35, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'battery': 88, 'voltage': 2.992}
2022-05-27 19:39:17 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'rssi': -76, 'mac': '28D12724115E', 'type': 'MJYD02YL', 'packet': 35, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'battery': 88, 'voltage': 2.992}
2022-05-27 19:39:17 DEBUG (MainThread) [custom_components.ble_monitor.device_tracker] 0 BLE ADV messages processed last 60 seconds for 0 device tracker device(s)
2022-05-27 19:39:17 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.74, 'humidity': 60.67, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 79, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:17 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.74, 'humidity': 60.67, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 79, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:19 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.32, 'humidity': 58.9, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 166, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:19 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.32, 'humidity': 58.9, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 166, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:20 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.63, 'humidity': 61.09, 'voltage': 2.796, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 108, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:20 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.63, 'humidity': 61.09, 'voltage': 2.796, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 108, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.92, 'humidity': 56.68, 'voltage': 2.686, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 71, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.92, 'humidity': 56.68, 'voltage': 2.686, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 71, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.11, 'humidity': 51.3, 'voltage': 2.955, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 26, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.11, 'humidity': 51.3, 'voltage': 2.955, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 26, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:21 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.31, 'humidity': 58.97, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -73, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 167, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:21 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.31, 'humidity': 58.97, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -73, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 167, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:22 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.71, 'humidity': 60.64, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -85, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 80, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:22 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.71, 'humidity': 60.64, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -85, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 80, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:23 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.xiaomi] Advertisement doesn't contain payload, adv: 0e1695fe1059f607e926b4c33e4dec
2022-05-27 19:39:23 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'rssi': -73, 'mac': 'EC4D3EC3B426', 'type': 'MJYD02YL', 'packet': 234, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'motion': 1, 'motion timer': 1, 'light': 1}
2022-05-27 19:39:23 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'rssi': -73, 'mac': 'EC4D3EC3B426', 'type': 'MJYD02YL', 'packet': 234, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'motion': 1, 'motion timer': 1, 'light': 1}
2022-05-27 19:39:24 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.28, 'humidity': 58.63, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 155, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:24 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.28, 'humidity': 58.63, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 155, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:26 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.36, 'humidity': 58.07, 'voltage': 2.961, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 85, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:26 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.36, 'humidity': 58.07, 'voltage': 2.961, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 85, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:26 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'rssi': -87, 'mac': 'EC4D3EC3B426', 'type': 'MJYD02YL', 'packet': 235, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'motion': 1}
2022-05-27 19:39:26 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'rssi': -87, 'mac': 'EC4D3EC3B426', 'type': 'MJYD02YL', 'packet': 235, 'firmware': 'Xiaomi (MiBeacon V5 encrypted)', 'data': True, 'motion': 1}
2022-05-27 19:39:28 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.19, 'humidity': 61.53, 'voltage': 2.913, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 184, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:28 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.19, 'humidity': 61.53, 'voltage': 2.913, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 184, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:28 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.93, 'humidity': 56.68, 'voltage': 2.693, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 72, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:28 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.93, 'humidity': 56.68, 'voltage': 2.693, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 72, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:29 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.xiaomi] Advertisement doesn't contain payload, adv: 0e1695fe1059f607ec26b4c33e4dec
2022-05-27 19:39:29 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'non-stabilized weight': 0.1, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '021400e607051b122c2d', 'rssi': -77, 'data': True}
2022-05-27 19:39:29 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Binary sensor device with mac address C8:47:8C:C0:95:89 has the following settings. Name: Waage. Restore State: True. Reset Timer: 35
2022-05-27 19:39:29 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'non-stabilized weight': 0.1, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '021400e607051b122c2d', 'rssi': -77, 'data': True}
2022-05-27 19:39:29 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address C8:47:8C:C0:95:89 has the following settings. Name: Waage. Temperature unit: °C. Decimals: 2. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:39:29 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address C8:47:8C:C0:95:89 has the following settings. Name: Waage. Temperature unit: °C. Decimals: 2. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:39:29 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Sensor device with mac_address C8:47:8C:C0:95:89 has the following settings. Name: Waage. Temperature unit: °C. Decimals: 2. Use Median: False. Restore state: True. Reset Timer: 35
2022-05-27 19:39:29 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] async_added_to_hass called for ble weight removed Waage
2022-05-27 19:39:29 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble weight Waage
2022-05-27 19:39:29 DEBUG (MainThread) [custom_components.ble_monitor.sensor] async_added_to_hass called for ble non-stabilized weight Waage
2022-05-27 19:39:30 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'non-stabilized weight': 90.15, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '026e46e607051b122c2d', 'rssi': -77, 'data': True}
2022-05-27 19:39:30 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'non-stabilized weight': 90.15, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '026e46e607051b122c2d', 'rssi': -77, 'data': True}
2022-05-27 19:39:30 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'non-stabilized weight': 89.65, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '020a46e607051b122c2e', 'rssi': -83, 'data': True}
2022-05-27 19:39:30 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'non-stabilized weight': 89.65, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '020a46e607051b122c2e', 'rssi': -83, 'data': True}
2022-05-27 19:39:31 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'non-stabilized weight': 89.8, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '022846e607051b122c2e', 'rssi': -84, 'data': True}
2022-05-27 19:39:31 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'non-stabilized weight': 89.8, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '022846e607051b122c2e', 'rssi': -84, 'data': True}
2022-05-27 19:39:31 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'non-stabilized weight': 89.95, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '024646e607051b122c2e', 'rssi': -84, 'data': True}
2022-05-27 19:39:31 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'non-stabilized weight': 89.95, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '024646e607051b122c2e', 'rssi': -84, 'data': True}
2022-05-27 19:39:31 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'non-stabilized weight': 89.95, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '024646e607051b122c2f', 'rssi': -83, 'data': True}
2022-05-27 19:39:31 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'non-stabilized weight': 89.95, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '024646e607051b122c2f', 'rssi': -83, 'data': True}
2022-05-27 19:39:31 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'non-stabilized weight': 89.9, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '023c46e607051b122c2f', 'rssi': -77, 'data': True}
2022-05-27 19:39:31 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'non-stabilized weight': 89.9, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '023c46e607051b122c2f', 'rssi': -77, 'data': True}
2022-05-27 19:39:32 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'non-stabilized weight': 89.9, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '023c46e607051b122c30', 'rssi': -77, 'data': True}
2022-05-27 19:39:32 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'non-stabilized weight': 89.9, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 0, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '023c46e607051b122c30', 'rssi': -77, 'data': True}
2022-05-27 19:39:32 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.77, 'humidity': 60.67, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 81, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:32 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.77, 'humidity': 60.67, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -77, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 81, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:32 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.23, 'humidity': 63.58, 'voltage': 2.614, 'battery': 46, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 171, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:32 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.23, 'humidity': 63.58, 'voltage': 2.614, 'battery': 46, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 171, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:32 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.45, 'humidity': 58.21, 'voltage': 2.858, 'battery': 73, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -89, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 77, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:32 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.45, 'humidity': 58.21, 'voltage': 2.858, 'battery': 73, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -89, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 77, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:33 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'non-stabilized weight': 89.85, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 1, 'weight': 89.85, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '223246e607051b122c30', 'rssi': -76, 'data': True}
2022-05-27 19:39:33 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'non-stabilized weight': 89.85, 'weight unit': 'kg', 'weight removed': 0, 'stabilized': 1, 'weight': 89.85, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': '223246e607051b122c30', 'rssi': -76, 'data': True}
2022-05-27 19:39:33 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.35, 'humidity': 58.43, 'voltage': 2.934, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 115, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:33 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.35, 'humidity': 58.43, 'voltage': 2.934, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 115, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:33 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.11, 'humidity': 51.31, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 27, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:33 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.11, 'humidity': 51.31, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -66, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 27, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:34 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.29, 'humidity': 58.58, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 156, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:34 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.29, 'humidity': 58.58, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 156, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:35 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.33, 'humidity': 56.5, 'voltage': 2.817, 'battery': 68, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -85, 'mac': 'A4C138407666', 'type': 'ATC', 'packet': 145, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:35 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.33, 'humidity': 56.5, 'voltage': 2.817, 'battery': 68, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -85, 'mac': 'A4C138407666', 'type': 'ATC', 'packet': 145, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:35 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.65, 'humidity': 61.02, 'voltage': 2.798, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 109, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:35 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.65, 'humidity': 61.02, 'voltage': 2.798, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 109, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:35 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.69, 'humidity': 58.52, 'voltage': 2.757, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 43, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:35 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.69, 'humidity': 58.52, 'voltage': 2.757, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -80, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 43, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:35 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'non-stabilized weight': 89.85, 'weight unit': 'kg', 'weight removed': 1, 'stabilized': 1, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': 'a23246e607051b122c33', 'rssi': -77, 'data': True}
2022-05-27 19:39:35 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'non-stabilized weight': 89.85, 'weight unit': 'kg', 'weight removed': 1, 'stabilized': 1, 'type': 'Mi Scale V1', 'firmware': 'Mi Scale V1', 'mac': 'C8478CC09589', 'packet': 'a23246e607051b122c33', 'rssi': -77, 'data': True}
2022-05-27 19:39:36 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.29, 'humidity': 58.98, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 168, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:36 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.29, 'humidity': 58.98, 'voltage': 2.967, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 168, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:40 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.64, 'humidity': 60.94, 'voltage': 2.792, 'battery': 65, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -58, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 110, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:40 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.64, 'humidity': 60.94, 'voltage': 2.792, 'battery': 65, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -58, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 110, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:41 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.12, 'humidity': 51.32, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -62, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 28, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:41 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.12, 'humidity': 51.32, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -62, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 28, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:43 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.34, 'humidity': 58.44, 'voltage': 2.929, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 116, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:43 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.34, 'humidity': 58.44, 'voltage': 2.929, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 116, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:44 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.29, 'humidity': 58.62, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 157, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:44 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.29, 'humidity': 58.62, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 157, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:44 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.34, 'humidity': 58.1, 'voltage': 2.961, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -76, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 87, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:44 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.34, 'humidity': 58.1, 'voltage': 2.961, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -76, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 87, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:44 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.3, 'humidity': 58.93, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -68, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 169, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:44 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.3, 'humidity': 58.93, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -68, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 169, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:45 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.33, 'humidity': 56.51, 'voltage': 2.817, 'battery': 68, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -91, 'mac': 'A4C138407666', 'type': 'ATC', 'packet': 146, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:45 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.33, 'humidity': 56.51, 'voltage': 2.817, 'battery': 68, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -91, 'mac': 'A4C138407666', 'type': 'ATC', 'packet': 146, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:45 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.27, 'humidity': 63.54, 'voltage': 2.633, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 173, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:45 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.27, 'humidity': 63.54, 'voltage': 2.633, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 173, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:45 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.73, 'humidity': 58.51, 'voltage': 2.755, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 44, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:45 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.73, 'humidity': 58.51, 'voltage': 2.755, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -83, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 44, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:47 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.45, 'humidity': 58.23, 'voltage': 2.856, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -88, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 78, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:47 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.45, 'humidity': 58.23, 'voltage': 2.856, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -88, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 78, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:49 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.09, 'humidity': 59.66, 'voltage': 2.97, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -85, 'mac': 'A4C138240E44', 'type': 'ATC', 'packet': 55, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:49 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.09, 'humidity': 59.66, 'voltage': 2.97, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -85, 'mac': 'A4C138240E44', 'type': 'ATC', 'packet': 55, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:51 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.09, 'humidity': 51.34, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 29, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:51 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.09, 'humidity': 51.34, 'voltage': 2.954, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -65, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 29, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:52 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.66, 'humidity': 60.97, 'voltage': 2.798, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -58, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 111, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:52 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.66, 'humidity': 60.97, 'voltage': 2.798, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -58, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 111, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:53 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.31, 'humidity': 58.43, 'voltage': 2.931, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -85, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 117, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:53 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.31, 'humidity': 58.43, 'voltage': 2.931, 'battery': 81, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -85, 'mac': 'A4C13805B0FA', 'type': 'ATC', 'packet': 117, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:53 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.18, 'humidity': 61.52, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 186, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:53 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.18, 'humidity': 61.52, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -82, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 186, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:56 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.21, 'humidity': 61.54, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 187, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:56 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.21, 'humidity': 61.54, 'voltage': 2.915, 'battery': 79, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C138383B50', 'type': 'ATC', 'packet': 187, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:56 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.93, 'humidity': 56.7, 'voltage': 2.694, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 74, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:56 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.93, 'humidity': 56.7, 'voltage': 2.694, 'battery': 54, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 74, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:56 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:39:56 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:39:56 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.35, 'humidity': 58.09, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 88, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:56 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.35, 'humidity': 58.09, 'voltage': 2.964, 'battery': 84, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -64, 'mac': 'A4C13899EC0E', 'type': 'ATC', 'packet': 88, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:57 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.29, 'humidity': 58.88, 'voltage': 2.97, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 170, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:57 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.29, 'humidity': 58.88, 'voltage': 2.97, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -72, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 170, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:57 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:39:57 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:39:57 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:39:57 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.66, 'humidity': 60.99, 'voltage': 2.796, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 112, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:57 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.66, 'humidity': 60.99, 'voltage': 2.796, 'battery': 66, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -55, 'mac': 'A4C138F2DBE9', 'type': 'ATC', 'packet': 112, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:57 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.27, 'humidity': 63.44, 'voltage': 2.636, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 174, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:57 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.27, 'humidity': 63.44, 'voltage': 2.636, 'battery': 48, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -70, 'mac': 'A4C1381A6DAB', 'type': 'ATC', 'packet': 174, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:57 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:39:58 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:39:58 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.72, 'humidity': 58.51, 'voltage': 2.758, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 45, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:58 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.72, 'humidity': 58.51, 'voltage': 2.758, 'battery': 62, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 45, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:58 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:39:58 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:39:59 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:39:59 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.29, 'humidity': 58.61, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 158, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:59 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.29, 'humidity': 58.61, 'voltage': 2.965, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 158, 'firmware': 'ATC (Custom)'}
2022-05-27 19:39:59 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:39:59 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:39:59 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:40:00 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.74, 'humidity': 60.68, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 83, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:00 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.74, 'humidity': 60.68, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -78, 'mac': 'A4C138087006', 'type': 'ATC', 'packet': 83, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:00 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.34, 'humidity': 56.53, 'voltage': 2.819, 'battery': 68, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C138407666', 'type': 'ATC', 'packet': 147, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:00 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.34, 'humidity': 56.53, 'voltage': 2.819, 'battery': 68, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C138407666', 'type': 'ATC', 'packet': 147, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:00 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:40:00 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:40:00 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:40:00 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:40:01 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:40:01 DEBUG (Thread-3) [custom_components.ble_monitor.ble_parser.ibeacon] Discovery is disabled. UUID: 1ca92e23-f087-4df7-b9a2-fd4b716a4bf6 is not whitelisted!
2022-05-27 19:40:01 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.28, 'humidity': 58.58, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 159, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:01 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.28, 'humidity': 58.58, 'voltage': 2.966, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -71, 'mac': 'A4C1383EF51B', 'type': 'ATC', 'packet': 159, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:03 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 23.9, 'humidity': 56.73, 'voltage': 2.697, 'battery': 55, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 75, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:03 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 23.9, 'humidity': 56.73, 'voltage': 2.697, 'battery': 55, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -81, 'mac': 'A4C1385AA9FA', 'type': 'ATC', 'packet': 75, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:04 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 25.07, 'humidity': 51.36, 'voltage': 2.955, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -67, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 30, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:04 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 25.07, 'humidity': 51.36, 'voltage': 2.955, 'battery': 83, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -67, 'mac': 'A4C1387162B4', 'type': 'ATC', 'packet': 30, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:04 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.31, 'humidity': 58.96, 'voltage': 2.969, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -73, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 171, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:04 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.31, 'humidity': 58.96, 'voltage': 2.969, 'battery': 85, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -73, 'mac': 'A4C13840FB89', 'type': 'ATC', 'packet': 171, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:05 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.41, 'humidity': 58.23, 'voltage': 2.855, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -87, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 80, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:05 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.41, 'humidity': 58.23, 'voltage': 2.855, 'battery': 72, 'switch': 0, 'opening': 0, 'status': 'opened', 'data': True, 'rssi': -87, 'mac': 'A4C138115248', 'type': 'ATC', 'packet': 80, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:05 DEBUG (MainThread) [custom_components.ble_monitor.binary_sensor] Data binary sensor received: {'temperature': 22.72, 'humidity': 58.52, 'voltage': 2.756, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 46, 'firmware': 'ATC (Custom)'}
2022-05-27 19:40:05 DEBUG (MainThread) [custom_components.ble_monitor.sensor] Data measuring sensor received: {'temperature': 22.72, 'humidity': 58.52, 'voltage': 2.756, 'battery': 61, 'switch': 0, 'opening': 1, 'status': 'opened', 'data': True, 'rssi': -79, 'mac': 'A4C138A76825', 'type': 'ATC', 'packet': 46, 'firmware': 'ATC (Custom)'}

Kaibob2 avatar May 27 '22 17:05 Kaibob2

I think this problem associated with https://github.com/custom-components/ble_monitor/issues/793 Mi Scales do not send any packets without physical interactions. I repeat again here, latest working version of component with correct working restore-state is 8.1.1

chertvl avatar May 28 '22 16:05 chertvl

I agree. This sounds quite similar. @Ernst79 Isn't there a way to get this working again like it used to?

Kaibob2 avatar May 28 '22 18:05 Kaibob2

The problem in #793 can be fixed with a workaround, by opening the ble monitor settings once, after the mac has been added to the list of devices. That’s why I was asking for the logs, to check if your scale is in the configuration. But it looks it is already in the configuration. The problem is that I can’t reproduce the issue, I tried it with a sensor, of which I removed the battery, but it restored the state just fine. I will check again in the near future, have been busy with my new house lately.

Ernst79 avatar May 28 '22 18:05 Ernst79

The scales MAC is C8:47:8C:C0:95:89 It appears in the list of whitelisted devices. Opening the configuration doesn't change anything.

Kaibob2 avatar May 28 '22 18:05 Kaibob2

For now I circumvent the issue with a node red node which is configured to not output the value if the previous state was "unavailable". Maybe this helps for finding a solution...

Kaibob2 avatar Jun 10 '22 13:06 Kaibob2

This issue is fixed in 10.2.0, see also #793

Ernst79 avatar Sep 07 '22 13:09 Ernst79

Works perfect. Thanks!

Kaibob2 avatar Sep 07 '22 15:09 Kaibob2