tuya-convert
tuya-convert copied to clipboard
ct-Open-Source
A collection of scripts to flash Tuya IoT devices to alternative firmwares
Trying to flash a CE smart Home LA-WF3. Bought it years ago in a two pack. Never used it. The other one in the pack I dismantled and flashed via...
I'm trying to configure the Lamp from brand Positivo Model (11167878) I got it to stop blinking (I'm thinking that it got connected). but I can't get further to that....
### Before opening a new issue, please read the following **Are you reporting a successful flash?** _Please add it to the wiki instead!_ **Do you have a question about configuring...
Hope this helps someone in the future as it took me a ton of time to resolve this issue. Raspberry Pi 3B running Debian Bookworm Linux pi 6.6.20+rpt-rpi-v8 #1 SMP...
Good day, im flashing new clean image raspbian buster on sd card, start rpi and create 3 command > cd /tmp > git clone https://github.com/ct-Open-Source/tuya-convert.git > cd tuya-convert after this,...
### Before opening a new issue, please read the following **Are you reporting a successful flash?** _No_ **Do you have a question about configuring your newly flashed device?** _No_ **Did...
Explain why, and discourage anyone from attempting to use virtualenv/venv. Current scripts expect global install, flash will fail if venv used.
### Before opening a new issue, please read the following **Did you have issues getting a device to flash?** _Please be sure to include your device **name, model, and firmware...
Hi guys, first, sorry for my bad english. Hopefully you can understand me. I tried to flash some of the plugs, but Tuya-Convert tells me, "Your device does not use...
Recently purchased some Gosund WP3s from Amazon to flash over to Tasmota.  I took one of four apart to poke around and connect VCC, GND, TX, RX, and...
Metadata
Owner
Metadata
A collection of scripts to flash Tuya IoT devices to alternative firmwares