tuya-convert

tuya-convert copied to clipboard

Cannot flash Topgreener TGWF115APM

8

Topgreener TGWF115APM, device is printed with "1810Ver1.0.1" on it. Using a Raspberry Pi 3B V1.2 to flash There seems to be a fault in smarthack-psk.log edit: cracked it open and...

ipher

Endless loop: Resending Smartconfig Packets

2

I am in an endless loop: ``` SmartConfig Complete. Resending Smartconfig packets ............................................... ``` Eventually timing out. The MAC address shown in the "connected" list is not the MAC address...

SteveRMann

Arch Linux support for install_prereq.sh

4

I edited the script to detect OS (and fallback to debian-based install should detection fail) and added a relevant function for Arch Linux (and possibly its derivatives). I have changed...

C0rn3j

BK7321t based devices

19

Hi, I've been looking into a BK7321 based device. I've successfully flashed it via uart, and feel that alternate firmware can be built. Do we have a feeling as to...

btsimonh

Alternatives for those of us with RTL8710 ("WARNING: it appears this device does not use an ESP82xx and therefore cannot install ESP based firmware")

35

First off, thank you @kueblc for picking up the torch on this, and thanks to everyone who contributed in the past, for that is the only way for any of...

TRSx80

Problem to convert water leak sensor

1

I have a water leak sensor I bought 1/2 years ago. I'd like to free him from Tuya and install Tasmota there. When I tray to convert it I get...

array81

Hallo, hat jemand schon Erfahrungen gesammelt mit dem Keramikheizer TT-PTC 02 ? https://www.tronitechnik.de/ptc-heizluefter-wifi-02/a-619 https://cdn02.plentymarkets.com/epm1wafxx218/frontend/Anleitungen/Tronitechnik_PTC_Heizgeraet_WIFI_TT-PTC-02.pdf Würde mich als Versuchskaninchen zur Verfügung stellen. Gruß MBR89

mbr1989

Unable to flash same batch of previously flashable devices

10

Crew, I was able to successfully flash a handful of Topgreener tgwf115pqm smartplug devices late last year. I have the same hardware revision devices and am unable to successfully flash...

AndrewKCST

Right now any change to any file would retrigger docker build to do a full prereq install. Given install_prereq.sh has no other dependencies, this changes it so that file is...

richievos

[Answer] Why they fight people wanting to control their own device

2

The only reason to why they do everything they can to stop people from re-flashing their own devices is because they sell your data. That is the only possible answer....

qkum