Sascha Kloß

@EmmanuelLM s fork is tested with me in PR #6 but up to now, my tests were not successful besides the code looking great. Maybe you should try my current...

Nice picture :-) Are you able to measure the voltages on the pins? One pair should show +11...15V. So you know GND and Supply. The other pair shows fluctating low...

Perfect, go for it. You identified supply and gnd. If you mix up rs485 a and b just swap them Michael ***@***.***> schrieb am Mi., 19. Mai 2021, 14:23: >...

What's your server? I ask because it took my installation also quiet a bit to load the gui on a Xiaomi Mi8. Turned out my raspberry 3b had been the...

Thank you for posting the solution to this. Is your SPA connection now working?

Please post a bunch of msg debugs to see if the value for the temp changes. Also, which rs485 module do you use? David Pye ***@***.***> schrieb am Di., 7....

Hey David, I'm using the same and also see increasing transmission errors in the last days. On another project one of these got hot to the point where the chip...

The Module resets if it could not initially connect to the wifi or it did not receive proper data from the whirlpool. Please verify your wifi credentials simplyjeroen ***@***.***> schrieb...