Craig Lamparter comments

Results 120 comments of


                                            Craig Lamparter

Set a curve value with a GVar

Compiled from master, much better so far. Pithos 1.6.2 The Ubuntu 24.04 deb on 24.04 OS (on kde desktop) hangs 3-4 seconds between mouse clicks, selections, scrolling. The Ubuntu 22.04...

failed to get tx report from firmware

Thanks. The diff's don't compile against the 6.12 headers (latest kernel for Raspberry Pi OS), so until they upgrade to 6.14, the workaround is to simply reload the module (run...

PTT dead air for 2-5 seconds before packet is transmitted

This is also USB audio (ic705 listed in OP). I can certainly try on other nonUSB audio devices too.

PTT dead air for 2-5 seconds before packet is transmitted

``` $ cat /proc/asound/cards 0 [CODEC ]: USB-Audio - USB Audio CODEC Burr-Brown from TI USB Audio CODEC at usb-xhci-hcd.0-1.4, full speed ```

PTT dead air for 2-5 seconds before packet is transmitted

Confirmed - DWC2 usb compatibility driver is only in use for 3B+/3A+/Zero2W, NOT Pi5/Pi4. I backed out the 4x tx buffer change I made, which might have been because of...

PTT dead air for 2-5 seconds before packet is transmitted

Also, audio-Bug ran to success, i'll loop it a bit to confirm.

PTT dead air for 2-5 seconds before packet is transmitted

Reverted my Tx buffer hack, so direwolf is stock 1.8beta in this regard, Three in thirty packets has a 1.5 second dead-air preamble, though, not as long as before.

PTT dead air for 2-5 seconds before packet is transmitted

Completely stock checkout of dev, seeing this maybe 1/40 packets, Raspberry Pi 5 Model B Rev 1.0 ICOM705 Raspberry Pi OS Trixie, Linux digipi 6.12.47+rpt-rpi-v8 ``` Dire Wolf version 1.8...

PTT dead air for 2-5 seconds before packet is transmitted

libhamlib4t64:armhf 4.6.2-1 I'll watch for TBEACON/PBEACON dead air

PTT dead air for 2-5 seconds before packet is transmitted

TBEACON [0L] KM6LYW-2>APDW18,WIDE1-1:!3854.70NT12056.09W&220/002DigiPi igate/tracker http://digipi.org/