me_cleaner
me_cleaner copied to clipboard
corna
Tool for partial deblobbing of Intel ME/TXE firmware images
me_cleaner v1.2 After flasing of patched image Wi-Fi crashes after some usage. See dmesg [me.txt](https://github.com/corna/me_cleaner/files/2656621/me.txt) [dmesg.txt](https://github.com/corna/me_cleaner/files/2656870/dmesg.txt) [bios.tar.gz](https://github.com/corna/me_cleaner/files/2656874/bios.tar.gz)
I have wrote an article that describes a method of internal flashing that was not fully described for disabling ME before, considering it would ideally fit as a new flashing...
Just FYI, there are two broken images on the [External Flashing](https://github.com/corna/me_cleaner/wiki/External-flashing) page. Also the [me_cleaner status](https://github.com/corna/me_cleaner/wiki/me_cleaner-status) page hasn't been updated for ME 12.x+.
I ve been hearing that boot guard may not work or wont work after IME deactivation What is better to have the gates or not to have the gates?
I saw the article below when reading news today. I can't tell whether this is an opportunity for me_cleaner / coreboot to leverage or whether it's the nail in the...
The dell bios managed to update remotely, I had disabled the Network stack on intel ME. (removed it) after the bios updated the laptop wouldn't boot up without crashing. (screen...
Hi, I have dual bios chips in my e540, flashrom finally identified the chips but said it could not read 4 bytes, so I used windows 10 as programmer with...
I've been running coreboot on my x230 for 2 years now updating once in a while. Decided I wanted more space, so I followed the "internal flashing with coreboot" wiki...
everytime i boot my PC I get warning "abnormal ME state, recommended reflash..." is there any way to remove this annoying notification? In addition Manufacturing mode is in disabled state...
CPU: Haswell (Intel i5 4670k) Motherboard: ASRock Z97M-ITX/AC Ethernet controller: Qualcomm Atheros QCA8171 Gigabit Ethernet (rev 10) (from `lspci` output) After running me_cleaner, the Ethernet interface doesn't show up to...
