lede
lede copied to clipboard
coolsnowwolf
小米路由3启动不了
反馈bug/问题模板，提建议请删除
1.关于你要提交的问题
Q：是否搜索了issue (使用 "x" 选择)
- [ ] 没有类似的issue
2. 详细叙述
(1) 具体问题
先刷了别人编译带pbboot的固件，然后在升级编译的固件，可以启动，但是WAN口失效的，没无线， 请问下百兆的R3，这个固件是要修改什么编译的吗？怎么我编译WAN口失效 没无线的，
(2) 路由器型号和固件版本
小米R3
(3) 详细日志
PandoraBox-Boot Version 2.1
Build:Mar 17 2▒▒▒▒▒▒▒▒▒:13
SoC:MT7620A
Memory-Testing...131072K OK
MT7620:CPU clock set to 580Mhz
PCIe:reset controller
PB-Boot running at 0x87FA4000!
NAND: F59L1G▒▒▒▒▒▒▒▒iB
▒▒▒ng internal default config
Board:X▒▒▒▒▒ҳ
PandoraBox GPIO subsystem init
PandoraBox MT762x GPIO driver initiali▒▒䮊▒▒▒▒O_Mode_REG: 0x0012391C
PandoraBox LED subsystem init
LED [Power] regis▒▒▒▒䊍▒andoraBox Button subsystem init
Button [Reset] registered
MT76▒ؠ▒▒נ▒nitialized 0
Booting from Fla▒议▒▒▒▒▒oting image from bc200000 ...
Image Name: MIPS OpenWrt Linux-5.4.86
Image Type▒▒▒▒▒▒▒ӠLinux Kernel Image (lzma compressed)
Data Size: 2120213 Bytes = ▒▒▒▒�▒▒▒ Load Address: 80000000
Entry Point: 80000000
Veri▒▒▒▒▒▒▒▒cksum ... OK
Uncompr▒▒▒▒▒▒▒ernel Image ... ▒ˊ▒ Flushing cache from 0x80000000 size 66625 48 ... OK
[ 0.000000] Linux versi▒▒▒▒▒▒ (zmf@zmf-virtual-machine) (gcc version 8.4.0 ( OpenWrt GCC 8.4.0 r3019-1▒巳▒䩩 #0 Sun Jan 17 03:10:55 2021
[ 0.000000] Board has DDR2
[ 0.0000▒▒ݠ▒▒▒▒▒g PMU set to hw control
[ 0.000000] Digital PMU set to hw control
[▒▒▒▒▒▒▒▒0000] SoC Type: MediaTek MT7620A ver:2 eco:6
[ 0.000000] printk: boo▒▒▒▒▒▒▒▒[early0] enabled
[ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)▒▒[ 0.000000] MIPS: mac hine is Xiaom▒▒▒▒▒▒ter R3
▒▒▒▒▒▒00000] Initrd not found or empty - disabling initrd
[ 0.000000] Prim▒▒▒▒▒▒▒▒uction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Prim▒▒▒▒▒▒▒cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[ 0.000000] Zone ran▒▒۠ 0.000000] Normal [mem 0x0000000000000000-0x0000 000007ffffff]
[ ▒▒▒▒▒▒▒▒▒0] Movable zone start for each node
[ 0.000000] Early memory node ra▒▒▒▒۠ 0.000000] node 0: [mem 0x000000000 0000000-0x0000000007ffffff]
[ ▒▒▒▒▒▒▒▒▒00] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[ 0▒▒▒▒▒▒▒ݠBuilt 1 zonelists, mobility grouping on. Total pages: 32480
[ 0.000▒▒▒ݠ▒▒▒▒el command line: console=ttyS0,115200 rootfstype=squashfs,jffs 2
▒▒▒▒▒▒00000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, li▒▒ ▒[ ▒▒▒▒▒▒▒▒▒00] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, li near)▒▒[ 0.000000] Writing ErrCtl register=0007a61f
[ 0.000000] Rea▒▒▒▒▒▒▒▒Ctl register=0007a61f
[ 0.000000] mem auto-init: stack:off, heap all▒▒▒▒欠heap free:off
[ 0.000000] Memory: 121960K/131072ˠ▒▒▒▒▒▒ble (5018K kernel code, 209K rwdata, 1104K rodata, 1212K init, 209K bss,▒▒▒▒▒ˠ▒▒served, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, ▒▒▒▒▒, MinObjects=0, CPUs=1, Nodes=1
▒▒▒▒▒▒▒0000] NR_IRQS: 256
[ 0.000000] random: get_random_bytes called from start_kerne쫰▒▒0x518 with cr ng_init=0
[ 0.000000] CPU Clock: 580MHz
[ 0.000000] clocksource:▒▒▒▒▒▒▒▒: mask: 0xffff max_cycles: 0xffff, max_idle_n s: 583261500 ns
[ 0.000▒▒▒ݠ▒▒▒▒ick: enable autosleep mode
[ 0.000000] systick: running - mult: 2147▒▒▒▒▒▒▒▒t: 32
[ 0.000000] clocksource: MIPS: mask: 0xffffffff ma▒▒▒▒▒▒▒▒ 0xffffffff, max_id le_ns: 6590553264 ns
[ 0.000012] sched_clock: 32 ▒▒▒▒▒▒90MHz, resolution 3ns, wraps every 74051159 02ns
[ 0.007592ݠ▒▒▒▒▒▒▒ting delay loop... 385.02 BogoMIPS (lpj=770048)
[ 0.045497] pid_max:▒▒▒▒▒▒▒▒ 32768 minimum: 301
[ 0.050183] Mount-cache hash table entries: 1024 (order▒▒▒▒▒▒▒▒6 bytes, linea r)
[ 0.057236] Mountpoint-cache hash table entries: 10▒▒▒▒▒▒▒▒▒: 0, 4096 bytes, linear)
[ 0.071566] clocksource: jiffie▒▒▒▒뺠0xffffffff max_cycles: 0xffffffff, max_i dle_ns: 7645041785100000 ns
[ ▒▒▒▒▒▒▒▒40] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[ 0.087732] pinctrl core: initialized ▒▒▒▒▒▒▒▒ubsystem
[ 0.093414] NET: R▒▒▒▒▒▒▒▒d protocol family 16
[ 0.583613] PCI host bridge /pcie@10140000 r▒▒▒▒▒ 0.588230] MEM 0x000000 0020000000..0x000000002fffffff
[ 0.593287ݠ▒▒▒Ϡ▒x0000000010160000..0x000000001016ffff
[ 0.624306] rt2880_gpio 10000600.gpio: register▒▒砲▒▒▒pios
[ 0.629781] rt2880_gpio 10000600.gpio: registerin砲▒▒▒▒▒handlers
[ 0.636142] rt2880_gpio 10000638.gpio: registe▒▒▒砱▒▒gpios
[ 0.641570] rt2880▒▒▒▒▒▒00638.gpio: registering 16 irq handlers
[ 0.648415] PCI host br▒▒▒▒▒▒bus 0000:00
[ 0.652396] pci_bus ▒▒▒▒▒▒▒▒ root bus resource [mem 0x20000000-0x2fffffff]
[ 0.659019] pci_bus 0▒▒▒▒▒▒▒▒▒oot bus resource [io 0xffffffff]
[ 0.664769] pci_bus 0000:00: root ▒▒▒▒▒▒▒urce [??? 0x00000000 flags 0x0]
[ 0.671360] pci_bus 0000:00: No busn▒▒▒▒▒▒▒▒▒ found for root bus, will use [b us 00-ff]
[ 0.679097] pci 0000:00:00▒▒▒▒۱▒▒4:0801] type 01 class 0x060400
[ 0.684919] pci 0000:00:00.0: reg 0x1▒▒▒▒▒▒▒x00000000-0x7fffffff]
[ 0.690980] pci 0000:00:00.0: reg 0x14: [mem 0▒▒▒▒0-0x0000ffff]
[ 0.697136] pci 0000:00▒▒▒▒▒▒▒▒▒pports D1
[ 0.700959] pci 0000:00:00.0: PME# supported from D0 D1 D▒▒▒▒[ 0.708663] p ci 0000:00:00.0: bridge configuration ▒▒▒▒▒▒䠨[bus 00-00]), reconfiguring
[ 0.716631] pci 0000:01▒▒▒▒▒▒▒۱4c3:7662] type 00 class 0x028000
▒ 0.722498] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bitݍ▒۠▒▒▒▒. 729089] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
▒ 0.735663] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
▒▒▒0.743498] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
▒▒▒▒▒▒▒9911] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[ ▒▒▒▒▒▒▒▒▒ pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[ 0.76▒▒▒▒ݠ▒▒▒ 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[ 0.769▒▒▒ݠ▒▒▒ 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
[ 0.77608▒ݠ▒▒頰▒00:00:00.0: BAR 9: assigned [mem 0x20100000-0x201fffff pref]
[ 0.783▒▒▒ݠ▒▒▒ 0000:00:00.0: BAR 1: assigned [mem 0x20200000-0x2020ffff]
[ 0.78970▒ݠ▒▒頰▒00:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
[ 0.79▒▒▒▒ݠ▒▒i 0000:01:00.0: BAR 6: assigned [mem 0x20100000-0x2010ffff pref]
[ 0▒▒▒▒▒▒▒ݠpci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.808621] pci 0000:00:00.▒▒▒▒▒▒▒▒dge window [mem 0x20000000-0x200fffff]
[ 0.815213] pci 0000:00:00.0:▒▒▒▒▒▒▒▒▒ window [mem 0x20100000-0x201fffff pref ]
[ 0.822339] workqueue: max_active 576 re▒▒▒▒▒▒▒▒or napi_workq is out of range , clamping between 1 and 512
[ 0.83700▒ݠ▒▒▒▒▒▒ource: Switched to clocksource systick
[ 0.843624] NET: Registered protocol family 2
[ ▒▒▒▒▒▒▒▒▒ tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes,▒▒▒▒▒▒▒
▒▒ 0.856910] TCP established hash table entries: 1024 (order: 0, 4096 byte▒▒▒▒▒▒ r)
[ 0.864318] TCP bind hash table entries: 1024 (order: 0, 4096 byt▒▒▒▒▒▒▒r)
[ 0.871160] TCP: Hash tables configured (established 1024 bind 10▒▒▒▒▒[ 0. 877476] UDP hash table entries: 256 (order: 0, 4096 bytes, l▒▒▒▒[ ▒▒▒▒▒▒▒▒] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.890907] NET: Registered protocol ▒▒▒▒▒▒
[ 0.895188] PCI: CLS 0 bytes, default 32
[ 0.901995] rt-timer 10000100.t▒▒▒▒▒▒ximum frequency is 1220Hz
[ 0.910224] workingset: times▒▒▒▒▒▒▒▒▒=14 max_order=15 bucket_order=1
▒▒▒▒▒▒▒5122] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.930741]▒▒▒▒▒ersion 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-20▒▒▒▒▒▒▒▒t, Inc.
[ 0.957565] Serial: 8▒▒▒▒▒▒▒▒0 driver, 2 ports, IRQ sharing disabled
[ 0.964870] printk: console [ttyS0]▒▒▒▒▒▒▒▒▒
▒▒▒▒.969094] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_bau䠽▒▒ ▒▒▒▒00) is a Palmchip BK-3103
[ 0.978710] printk: console [ttyS0] enabled
[ 0.978710] printk: console [ttyS0] enabled
[ 0.987174] printk: bootconsole [early0] disabled
[ 0.987174] printk: bootconsole [early0] disabled
[ 0.998061] !!! nand page size = 2048, addr len=4
[ 1.007900] mtk_nand_probe: alloc 13c0, at (ptrval) , btt((ptrval), 100), ran fc_mtd:(ptrval)
[ 1.016673] 10 fixed-partitions partitions found on MTD device ra_nfc
[ 1.023256] Creating 10 MTD partitions on "ra_nfc":
[ 1.028253] 0x000000000000-0x000000040000 : "Bootloader"
[ 1.034767] 0x000000040000-0x000000080000 : "Config"
[ 1.041100] 0x000000080000-0x0000000c0000 : "Bdata"
[ 1.047136] 0x0000000c0000-0x000000100000 : "factory"
[ 1.053511] 0x000000100000-0x000000140000 : "crash"
[ 1.059593] 0x000000140000-0x000000180000 : "crash_syslog"
[ 1.066338] 0x000000180000-0x000000200000 : "reserved0"
[ 1.072847] 0x000000200000-0x000000600000 : "kernel_stock"
[ 1.080395] 0x000000600000-0x000000a00000 : "kernel"
[ 1.087371] 0x000000a00000-0x000008000000 : "ubi"
[ 1.118982] libphy: Fixed MDIO Bus: probed
[ 1.139889] gsw: setting port4 to ephy mode
[ 1.144243] ralink_soc_eth 10100000.ethernet eth0 (uninitialized): port 0 lin k up (100Mbps/Full duplex)
[ 1.153829] ralink_soc_eth 10100000.ethernet eth0 (uninitialized): port 1 lin k up (100Mbps/Full duplex)
[ 1.163928] ralink_soc_eth 10100000.ethernet: loaded mt7620 driver
[ 1.170974] ralink_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0 xb0100000, irq 5
[ 1.180281] rt2880_wdt 10000120.watchdog: Initialized
[ 1.186982] NET: Registered protocol family 10
[ 1.196198] Segment Routing with IPv6
[ 1.200154] NET: Registered protocol family 17
[ 1.204784] 8021q: 802.1Q VLAN Support v1.8
[ 1.212036] UBI: auto-attach mtd9
[ 1.215526] ubi0: attaching mtd9
[ 1.412960] random: fast init done
[ 1.759515] ubi0: scanning is finished
[ 1.774421] ubi0: attached mtd9 (name "ubi", size 118 MiB)
[ 1.780099] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.787133] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.794071] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.801185] ubi0: good PEBs: 944, bad PEBs: 0, corrupted PEBs: 0
[ 1.807322] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 12 8
[ 1.814701] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequ ence number: 1610853055
[ 1.824027] ubi0: available PEBs: 0, total reserved PEBs: 944, PEBs reserved for bad PEB handling: 20
[ 1.835083] block ubiblock0_0: created from ubi0:0(rootfs)
[ 1.840765] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 1.848785] ubi0: background thread "ubi_bgt0d" started, PID 352
[ 1.863571] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 1.877863] Freeing unused kernel memory: 1212K
[ 1.882514] This architecture does not have kernel memory protection.
[ 1.889089] Run /sbin/init as init process
[ 3.186223] init: Console is alive
[ 3.190410] init: - watchdog -
[ 3.506326] kmodloader: no module folders for kernel version 5.4.86 found
[ 3.517698] init: - preinit -
[ 4.992316] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.479717] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.707344] random: jshn: uninitialized urandom read (4 bytes read)
[ 8.233470] 8021q: adding VLAN 0 to HW filter on device eth0
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 8.335088] urandom_read: 4 callbacks suppressed
[ 8.335098] random: procd: uninitialized urandom read (4 bytes read)
[ 10.419039] mount_root: loading kmods from internal overlay
[ 10.434652] kmodloader: no module folders for kernel version 5.4.86 found
[ 10.442607] mount_root: failed to launch kmodloader from internal overlay
[ 11.031133] block: attempting to load /etc/config/fstab
[ 11.045868] block: unable to load configuration (fstab: Entry not found)
[ 11.053240] block: no usable configuration
[ 11.061749] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 11.086254] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 456
[ 11.113983] UBIFS (ubi0:1): recovery needed
[ 11.275822] UBIFS (ubi0:1): recovery completed
[ 11.280531] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "root fs_data"
[ 11.288543] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O u nit sizes: 2048 bytes/2048 bytes
[ 11.298675] UBIFS (ubi0:1): FS size: 89518080 bytes (85 MiB, 705 LEBs), journ al size 4444160 bytes (4 MiB, 35 LEBs)
[ 11.309330] UBIFS (ubi0:1): reserved for root: 4228160 bytes (4129 KiB)
[ 11.316096] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID FA40B 607-FC05-4D70-A523-A3BC194CC6DC, small LPT model
[ 11.328292] UBIFS (ubi0:1): full atime support is enabled.
[ 11.340440] mount_root: loading kmods from internal overlay
[ 11.356294] kmodloader: no module folders for kernel version 5.4.86 found
[ 11.364237] mount_root: failed to launch kmodloader from internal overlay
[ 11.762046] block: attempting to load /etc/config/fstab
[ 11.768018] block: unable to load configuration (fstab: Entry not found)
[ 11.775409] block: no usable configuration
[ 11.781523] mount_root: switching to ubifs overlay
[ 11.800451] urandom-seed: Seeding with /etc/urandom.seed
[ 12.030033] procd: - early -
[ 12.033583] procd: - watchdog -
[ 13.336290] procd: - watchdog -
[ 13.357646] procd: - ubus -
[ 13.934268] random: ubusd: uninitialized urandom read (4 bytes read)
[ 13.944104] random: ubusd: uninitialized urandom read (4 bytes read)
[ 13.959347] procd: - init -
Please press Enter to activate this console.
[ 16.213515] kmodloader: no module folders for kernel version 5.4.86 found
[ 27.070665] random: crng init done
[ 41.435054] 8021q: adding VLAN 0 to HW filter on device eth0
[ 41.475753] device eth0 entered promiscuous mode
[ 41.491485] br-lan: port 1(eth0.1) entered blocking state
[ 41.497089] br-lan: port 1(eth0.1) entered disabled state
[ 41.503016] device eth0.1 entered promiscuous mode
[ 41.522665] br-lan: port 1(eth0.1) entered blocking state
[ 41.528200] br-lan: port 1(eth0.1) entered forwarding state
[ 42.447156] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
____________________________________▒▒▒▒▒▒▒▒
| ____ _ ____ ▒▒▒▒| _ \ __ _ _ _ _ | | ___ _ __ __ | __ ) _____ __ |
| | |) ▒▒▒▒▒ \ / |/ _ \| '__/ _ | _ \ / _ \ / / |
| | __/ (| | | | | (▒▒▒ߩ▒| | | (| | |) | () > < |
| || _,|| ||_,|_/|| \▒߬▒▒▒▒▒/ _/_/_\ |
| ▒▒▒▒▒▒▒▒▒ |
| PandoraBox Ralink/MTK Platform |
| ▒▒▒▒▒▒▒▒ The Core of SmartRouter |
| ▒▒▒▒▒▒▒▒▒t 2017 PandoraBox Team |
|______▒▒▒▒▒▒▒▒|
PandoraBox-Boot Version 2.1 Build:Mar 17 2▒▒▒▒▒▒▒▒▒:13 SoC:MT7620A Memory-Testing...131072K OK MT7620:CPU clock set to 580Mhz PCIe:reset controller PB-Boot running at 0x87FA4000! NAND: F59L1G▒▒▒▒▒▒▒▒iB ▒▒▒ng internal default config Board:X▒▒▒▒▒ҳ PandoraBox GPIO subsystem init PandoraBox MT762x GPIO driver initiali▒▒䮊▒▒▒▒O_Mode_REG: 0x0012391C PandoraBox LED subsystem init LED [Power] regis▒▒▒▒䊍▒andoraBox Button subsystem init Button [Reset] registered MT76▒ؠ▒▒נ▒nitialized 0 Booting from Fla▒议▒▒▒▒▒oting image from bc200000 ... Image Name: MIPS OpenWrt Linux-5.4.86 Image Type▒▒▒▒▒▒▒ӠLinux Kernel Image (lzma compressed) Data Size: 2120213 Bytes = ▒▒▒▒�▒▒▒ Load Address: 80000000 Entry Point: 80000000 Veri▒▒▒▒▒▒▒▒cksum ... OK Uncompr▒▒▒▒▒▒▒ernel Image ... ▒ˊ▒ Flushing cache from 0x80000000 size 66625 48 ... OK [ 0.000000] Linux versi▒▒▒▒▒▒ (zmf@zmf-virtual-machine) (gcc version 8.4.0 ( OpenWrt GCC 8.4.0 r3019-1▒巳▒䩩 #0 Sun Jan 17 03:10:55 2021 [ 0.000000] Board has DDR2 [ 0.0000▒▒ݠ▒▒▒▒▒g PMU set to hw control [ 0.000000] Digital PMU set to hw control [▒▒▒▒▒▒▒▒0000] SoC Type: MediaTek MT7620A ver:2 eco:6 [ 0.000000] printk: boo▒▒▒▒▒▒▒▒[early0] enabled [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)▒▒[ 0.000000] MIPS: mac hine is Xiaom▒▒▒▒▒▒ter R3 ▒▒▒▒▒▒00000] Initrd not found or empty - disabling initrd [ 0.000000] Prim▒▒▒▒▒▒▒▒uction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Prim▒▒▒▒▒▒▒cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] Zone ran▒▒۠ 0.000000] Normal [mem 0x0000000000000000-0x0000 000007ffffff] [ ▒▒▒▒▒▒▒▒▒0] Movable zone start for each node [ 0.000000] Early memory node ra▒▒▒▒۠ 0.000000] node 0: [mem 0x000000000 0000000-0x0000000007ffffff] [ ▒▒▒▒▒▒▒▒▒00] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0▒▒
BusyBox v1.35.0 (2022-08-21 07:18:14 UTC) built-in shell (ash)
▒▒▒▒▒ݠBuilt 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000▒▒▒ݠ▒▒▒▒el command line: console=ttyS0,115200 rootfstype=squashfs,jffs 2 ▒▒▒▒▒▒00000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, li▒▒ ▒[ ▒▒▒▒▒▒▒▒▒00] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, li near)▒▒[ 0.000000] Writing ErrCtl register=0007a61f [ 0.000000] Rea▒▒▒▒▒▒▒▒Ctl register=0007a61f [ 0.000000] mem auto-init: stack:off, heap all▒▒▒▒欠heap free:off [ 0.000000] Memory: 121960K/131072ˠ▒▒▒▒▒▒ble (5018K kernel code, 209K rwdata, 1104K rodata, 1212K init, 209K bss,▒▒▒▒▒ˠ▒▒served, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, ▒▒▒▒▒, MinObjects=0, CPUs=1, Nodes=1 ▒▒▒▒▒▒▒0000] NR_IRQS: 256 [ 0.000000] random: get_random_bytes called from start_kerne쫰▒▒0x518 with cr ng_init=0 [ 0.000000] CPU Clock: 580MHz [ 0.000000] clocksource:▒▒▒▒▒▒▒▒: mask: 0xffff max_ _________ / /\ _ ___ ___ ___ / LE / \ | | | | | | / DE / \ | || _|| |) | _| /_/ LE \ |||/|| \ \ DE / \ LE \ / ------------------------------------------- \ DE \ / OpenWrt SNAPSHOT, r4879-89cea5969 ________/ -------------------------------------------
root@OpenWrt:/# | ____ _ ____ ▒
▒▒▒| _ \ __ _ _ __ | | ___ _ __ __ | __ ) _____ __ |
/bin/ash: syntax error: unexpected "|"
root@OpenWrt:/# | | |) ▒▒▒▒▒ \ / |/ _ \| '__/ _ | _ \ / _ \
/ / |
/bin/ash: syntax error: unexpected "|"
root@OpenWrt:/# | | __/ (| | | | | (▒▒▒ߩ▒| | | (| | |) | () > <
|
/bin/ash: syntax error: unexpected "|"
root@OpenWrt:/# | || _,|| ||_,|__/|| \▒߬▒▒▒▒▒/ _
__/_/_\ |
/bin/ash: syntax error: unexpected "|"
root@OpenWrt:/# | ▒▒▒▒
▒▒▒▒▒▒ |
/bin/ash: syntax error: unexpected "|"
root@OpenWrt:/# | PandoraBox Ralink/MTK Platform |
/bin/ash: syntax error: unexpected "|"
root@OpenWrt:/# | ▒▒▒▒▒▒▒▒ The Core of SmartRouter
|
/bin/ash: syntax error: unexpected "|"
root@OpenWrt:/# | ▒▒▒▒▒▒▒▒▒t 2017 PandoraBox Tea
m |
/bin/ash: syntax error: unexpected "|"
root@OpenWrt:/# |_____________________▒▒▒▒▒▒▒▒
______________|
/bin/ash: syntax error: unexpected "|"
root@OpenWrt:/#
root@OpenWrt:/# PandoraBox-Boot Version 2.1
/bin/ash: PandoraBox-Boot: not found
root@OpenWrt:/# Build:Mar 17 2▒▒▒▒▒▒▒▒▒:13
/bin/ash: Build:Mar: not found
root@OpenWrt:/# SoC:MT7620A
/bin/ash: SoC:MT7620A: not found
root@OpenWrt:/# Memory-Testing...131072K OK
/bin/ash: Memory-Testing...131072K: not found
root@OpenWrt:/# MT7620:CPU clock set to 580Mhz
/bin/ash: MT7620:CPU: not found
root@OpenWrt:/# PCIe:reset controller
/bin/ash: PCIe:reset: not found
root@OpenWrt:/# PB-Boot running at 0x87FA4000!
/bin/ash: PB-Boot: not found
root@OpenWrt:/# NAND: F59L1G▒▒▒▒▒▒▒▒iB
/bin/ash: NAND:: not found
root@OpenWrt:/# ▒▒▒ng internal default config
/bin/ash: ▒▒▒ng: not found
root@OpenWrt:/# Board:X▒▒▒▒▒ҳ
/bin/ash: Board:X▒▒▒▒▒ҳ: not found
root@OpenWrt:/# PandoraBox GPIO subsystem init
/bin/ash: PandoraBox: not found
root@OpenWrt:/# PandoraBox MT762x GPIO driver initiali▒▒䮊▒▒▒▒O_Mod
e_REG: 0x0012391C
/bin/ash: PandoraBox: not found
root@OpenWrt:/# PandoraBox LED subsystem init
/bin/ash: PandoraBox: not found
root@OpenWrt:/# LED [Power] regis▒▒▒▒䊍▒andoraBox Button subsystem in
it
/bin/ash: LED: not found
root@OpenWrt:/# Button [Reset] registered
/bin/ash: Button: not found
root@OpenWrt:/# MT76▒ؠ▒▒נ▒nitialized
0
/bin/ash: MT76▒ؠ▒▒נ▒nitialized: not found
root@OpenWrt:/# Booting from Fla▒议▒▒▒▒▒oting image from bc200000 .
..
/bin/ash: Booting: not found
root@OpenWrt:/# Image Name: MIPS OpenWrt Linux-5.4.86
/bin/ash: Image: not found
root@OpenWrt:/# Image Type▒▒▒▒▒▒▒ӠLinux Kernel Image (lzma com
pressed)
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# Data Size: 2120213 Bytes = ▒▒▒▒�▒▒▒ Load A
ddress: 80000000
/bin/ash: Data: not found
root@OpenWrt:/# Entry Point: 80000000
/bin/ash: Entry: not found
root@OpenWrt:/# Veri▒▒▒▒▒▒▒▒cksum ... OK
/bin/ash: Veri▒▒▒▒▒▒▒▒cksum: not found
root@OpenWrt:/# Uncompr▒▒▒▒▒▒▒ernel Image ... ▒ˊ▒ Flushi
ng cache from 0x80000000 size 6662548 ... OK
/bin/ash: Uncompr▒▒▒▒▒▒▒ernel: not found
root@OpenWrt:/# [ 0.000000] Linux versi▒▒▒▒▒▒ (zmf@zmf-virtual
-machine) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r3019-1▒巳▒䩩 #0 Sun Jan 1
7 03:10:55 2021
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 0.000000] Board has DDR2
ash: missing ]
root@OpenWrt:/# [ 0.0000▒▒ݠ▒▒▒▒▒g PMU set to hw control
ash: missing ]
root@OpenWrt:/# [ 0.000000] Digital PMU set to hw control
ash: missing ]
root@OpenWrt:/# [▒▒▒▒▒▒▒▒0000] SoC Type: MediaTek MT7620A ver:2
eco:6
/bin/ash: [▒▒▒▒▒▒▒▒0000]: not found
root@OpenWrt:/# [ 0.000000] printk: boo▒▒▒▒▒▒▒▒[early0] enabl
ed
ash: missing ]
root@OpenWrt:/# [ 0.000000] CPU0 revision is: 00019650 (MIPS 24KEc)▒▒[
0.000000] MIPS: machine is Xiaom▒▒▒▒▒▒ter R3
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# ▒▒▒▒▒▒00000] Initrd not found or empty - disabling i
nitrd
/bin/ash: ▒▒▒▒▒▒00000]: not found
root@OpenWrt:/# [ 0.000000] Prim▒▒▒▒▒▒▒▒uction cache 64kB, VI
PT, 4-way, linesize 32 bytes.
ash: missing ]
root@OpenWrt:/# [ 0.000000] Prim▒▒▒▒▒▒▒cache 32kB, 4-way, PIPT,
no aliases, linesize 32 bytes
ash: missing ]
root@OpenWrt:/# [ 0.000000] Zone ran▒▒۠ 0.000000] Normal [mem
0x0000000000000000-0x0000000007ffffff]
ash: missing ]
root@OpenWrt:/# [ ▒▒▒▒▒▒▒▒▒0] Movable zone start for each nod
e
ash: missing ]
root@OpenWrt:/# [ 0.000000] Early memory node ra▒▒▒▒۠ 0.000000]
node 0: [mem 0x0000000000000000-0x0000000007ffffff]
ash: missing ]
root@OpenWrt:/# [ ▒▒▒▒▒▒▒▒▒00] Initmem setup node 0 [mem 0x000
0000000000000-0x0000000007ffffff]
ash: missing ]
root@OpenWrt:/# [ 0▒▒▒▒▒▒▒ݠBuilt 1 zonelists, mobility groupin
g on. Total pages: 32480
ash: missing ]
root@OpenWrt:/# [ 0.000▒▒▒ݠ▒▒▒▒el command line: console=ttyS0,
115200 rootfstype=squashfs,jffs2
ash: missing ]
root@OpenWrt:/# ▒▒▒▒▒▒00000] Dentry cache hash table entries: 16384
(order: 4, 65536 bytes, li▒▒▒[ ▒▒▒▒▒▒▒▒▒00] Inode-ca
che hash table entries: 8192 (order: 3, 32768 bytes, linear)▒▒[ 0.000000]
Writing ErrCtl register=0007a61f
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 0.000000] Rea▒▒▒▒▒▒▒▒Ctl register=0007a61f
ash: missing ]
root@OpenWrt:/# [ 0.000000] mem auto-init: stack:off, heap all▒▒▒▒欠
heap free:off
ash: missing ]
root@OpenWrt:/# [ 0.000000] Memory: 121960K/131072ˠ▒▒▒▒▒▒ble (50
18K kernel code, 209K rwdata, 1104K rodata, 1212K init, 209K bss,▒▒▒▒▒
ˠ▒▒served, 0K cma-reserved)
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 0.000000] SLUB: HWalign=32, ▒▒▒▒▒, MinObjects
=0, CPUs=1, Nodes=1
ash: missing ]
root@OpenWrt:/# ▒▒▒▒▒▒▒0000] NR_IRQS: 256
/bin/ash: ▒▒▒▒▒▒▒0000]: not found
root@OpenWrt:/# [ 0.000000] random: get_random_bytes called from start_kerne▒
▒▒▒▒0x518 with crng_init=0
ash: missing ]
root@OpenWrt:/# [ 0.000000] CPU Clock: 580MHz
ash: missing ]
root@OpenWrt:/# [ 0.000000] clocksource:▒▒▒▒▒▒▒▒: mask: 0xfff
f max_cycles: 0xffff, max_idle_ns: 583261500 ns
ash: missing ]
root@OpenWrt:/# [ 0.000▒▒▒ݠ▒▒▒▒ick: enable autosleep mode
ash: missing ]
root@OpenWrt:/# [ 0.000000] systick: running - mult: 2147▒▒▒▒▒▒▒
▒▒t: 32
ash: missing ]
root@OpenWrt:/# [ 0.000000] clocksource: MIPS: mask: 0xffffffff ma▒▒▒▒
▒▒▒▒▒ 0xffffffff, max_idle_ns: 6590553264 ns
ash: missing ]
root@OpenWrt:/# [ 0.000012] sched_clock: 32 ▒▒▒▒▒▒90MHz, resoluti
on 3ns, wraps every 7405115902ns
ash: missing ]
root@OpenWrt:/# [ 0.007592ݠ▒▒▒▒▒▒▒ting delay loop... 385.02 Bo
goMIPS (lpj=770048)
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 0.045497] pid_max:▒▒▒▒▒▒▒▒ 32768 minimum: 3
01
ash: missing ]
root@OpenWrt:/# [ 0.050183] Mount-cache hash table entries: 1024 (order▒▒
▒▒▒▒▒▒6 bytes, linear)
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 0.057236] Mountpoint-cache hash table entries: 10▒▒▒▒
▒▒▒▒▒▒▒: 0, 4096 bytes, linear)
/bin/ash: syntax error: unexpected ")"
root@OpenWrt:/# [ 0.071566] clocksource: jiffie▒▒▒▒뺠0xffffffff max
cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
ash: missing ]
root@OpenWrt:/# [ ▒▒▒▒▒▒▒▒40] futex hash table entries: 256 (or
der: -1, 3072 bytes, linear)
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 0.087732] pinctrl core: initialized ▒▒▒▒▒▒▒▒
▒ubsystem
ash: missing ]
root@OpenWrt:/# [ 0.093414] NET: R▒▒▒▒▒▒▒▒d protocol family 1
6
ash: missing ]
root@OpenWrt:/# [ 0.583613] PCI host bridge /pcie@10140000 r▒▒▒▒▒
▒▒ 0.588230] MEM 0x0000000020000000..0x000000002fffffff
ash: missing ]
root@OpenWrt:/# [ 0.593287ݠ▒▒▒Ϡ▒x0000000010160000..0x000000001016ff
ff
ash: missing ]
root@OpenWrt:/# [ 0.624306] rt2880_gpio 10000600.gpio: register▒▒砲▒▒
▒▒pios
ash: missing ]
root@OpenWrt:/# [ 0.629781] rt2880_gpio 10000600.gpio: registerin砲▒▒▒
▒▒handlers
ash: missing ]
root@OpenWrt:/# [ 0.636142] rt2880_gpio 10000638.gpio: registe▒▒▒砱▒
▒gpios
ash: missing ]
root@OpenWrt:/# [ 0.641570] rt2880▒▒▒▒▒▒00638.gpio: registerin
g 16 irq handlers
ash: missing ]
root@OpenWrt:/# [ 0.648415] PCI host br▒▒▒▒▒▒bus 0000:00
ash: missing ]
root@OpenWrt:/# [ 0.652396] pci_bus ▒▒▒▒▒▒▒▒ root bus resourc
e [mem 0x20000000-0x2fffffff]
ash: missing ]
root@OpenWrt:/# [ 0.659019] pci_bus 0▒▒▒▒▒▒▒▒▒oot bus resou
rce [io 0xffffffff]
ash: missing ]
root@OpenWrt:/# [ 0.664769] pci_bus 0000:00: root ▒▒▒▒▒▒▒urce [
??? 0x00000000 flags 0x0]
ash: missing ]
root@OpenWrt:/# [ 0.671360] pci_bus 0000:00: No busn▒▒▒▒▒▒▒▒▒
▒▒ found for root bus, will use [bus 00-ff]
ash: missing ]
root@OpenWrt:/# [ 0.679097] pci 0000:00:00▒▒▒▒۱▒▒4:0801] type 01
class 0x060400
ash: missing ]
root@OpenWrt:/# [ 0.684919] pci 0000:00:00.0: reg 0x1▒▒▒▒▒▒▒x00
000000-0x7fffffff]
ash: missing ]
root@OpenWrt:/# [ 0.690980] pci 0000:00:00.0: reg 0x14: [mem 0▒▒▒▒0-0
x0000ffff]
ash: missing ]
root@OpenWrt:/# [ 0.697136] pci 0000:00▒▒▒▒▒▒▒▒▒pports D1
ash: missing ]
root@OpenWrt:/# [ 0.700959] pci 0000:00:00.0: PME# supported from D0 D1 D▒▒
▒▒▒▒[ 0.708663] pci 0000:00:00.0: bridge configuration ▒▒▒▒▒▒
䠨[bus 00-00]), reconfiguring
/bin/ash: syntax error: unexpected ")"
root@OpenWrt:/# [ 0.716631] pci 0000:01▒▒▒▒▒▒▒۱4c3:7662] type
00 class 0x028000
ash: missing ]
root@OpenWrt:/# ▒ 0.722498] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000
fffff 64bitݍ▒۠▒▒▒▒.729089] pci 0000:01:00.0: reg 0x30: [mem 0x000000
00-0x0000ffff pref]
/bin/ash: ▒: not found
root@OpenWrt:/# ▒ 0.735663] pci 0000:01:00.0: PME# supported from D0 D3hot D3
cold
/bin/ash: ▒: not found
root@OpenWrt:/# ▒▒▒0.743498] pci_bus 0000:01: busn_res: [bus 01-ff] end is
updated to 01
/bin/ash: ▒▒▒0.743498]: not found
root@OpenWrt:/# ▒▒▒▒▒▒▒9911] pci_bus 0000:00: busn_res: [bus 00-ff
] end is updated to 01
/bin/ash: ▒▒▒▒▒▒▒9911]: not found
root@OpenWrt:/# [ ▒▒▒▒▒▒▒▒▒ pci 0000:00:00.0: BAR 0: no spa
ce for [mem size 0x80000000]
ash: missing ]
root@OpenWrt:/# [ 0.76▒▒▒▒ݠ▒▒▒ 0000:00:00.0: BAR 0: failed to
assign [mem size 0x80000000]
ash: missing ]
root@OpenWrt:/# [ 0.769▒▒▒ݠ▒▒▒ 0000:00:00.0: BAR 8: assigned [me
m 0x20000000-0x200fffff]
ash: missing ]
root@OpenWrt:/# [ 0.77608▒ݠ▒▒頰▒00:00:00.0: BAR 9: assigned [mem 0x
20100000-0x201fffff pref]
ash: missing ]
root@OpenWrt:/# [ 0.783▒▒▒ݠ▒▒▒ 0000:00:00.0: BAR 1: assigned [me
m 0x20200000-0x2020ffff]
ash: missing ]
root@OpenWrt:/# [ 0.78970▒ݠ▒▒頰▒00:01:00.0: BAR 0: assigned [mem 0x
20000000-0x200fffff 64bit]
ash: missing ]
root@OpenWrt:/# [ 0.79▒▒▒▒ݠ▒▒i 0000:01:00.0: BAR 6: assigned [me
m 0x20100000-0x2010ffff pref]
ash: missing ]
root@OpenWrt:/# [ 0▒▒▒▒▒▒▒ݠpci 0000:00:00.0: PCI bridge to [bu
s 01]
ash: missing ]
root@OpenWrt:/# [ 0.808621] pci 0000:00:00.▒▒▒▒▒▒▒▒dge window
[mem 0x20000000-0x200fffff]
ash: missing ]
root@OpenWrt:/# [ 0.815213] pci 0000:00:00.0:▒▒▒▒▒▒▒▒▒ wind
ow [mem 0x20100000-0x201fffff pref]
ash: missing ]
root@OpenWrt:/# [ 0.822339] workqueue: max_active 576 re▒▒▒▒▒▒▒
▒or napi_workq is out of range, clamping between 1 and 512
ash: missing ]
root@OpenWrt:/# [ 0.83700▒ݠ▒▒▒▒▒▒ource: Switched to clocksourc
e systick
ash: missing ]
root@OpenWrt:/# [ 0.843624] NET: Registered protocol family 2
ash: missing ]
root@OpenWrt:/# [ ▒▒▒▒▒▒▒▒▒ tcp_listen_portaddr_hash hash t
able entries: 512 (order: 0, 4096 bytes,▒▒▒▒▒▒▒
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# ▒▒ 0.856910] TCP established hash table entries: 1024 (order
: 0, 4096 byte▒▒▒▒▒▒r)
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 0.864318] TCP bind hash table entries: 1024 (order: 0, 4096
byt▒▒▒▒▒▒▒r)
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 0.871160] TCP: Hash tables configured (established 1024 bin
d 10▒▒▒▒▒[ 0.877476] UDP hash table entries: 256 (order: 0, 4096 by
tes, l▒▒▒▒[ ▒▒▒▒▒▒▒▒] UDP-Lite hash table entries
: 256 (order: 0, 4096 bytes, linear)
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 0.890907] NET: Registered protocol ▒▒▒▒▒▒
ash: missing ]
root@OpenWrt:/# [ 0.895188] PCI: CLS 0 bytes, default 32
ash: missing ]
root@OpenWrt:/# [ 0.901995] rt-timer 10000100.t▒▒▒▒▒▒ximum freque
ncy is 1220Hz
ash: missing ]
root@OpenWrt:/# [ 0.910224] workingset: times▒▒▒▒▒▒▒▒▒=14 m
ax_order=15 bucket_order=1
ash: missing ]
root@OpenWrt:/# ▒▒▒▒▒▒▒5122] squashfs: version 4.0 (2009/01/31) Ph
illip Lougher
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 0.930741]▒▒▒▒▒ersion 2.2 (NAND) (SUMMARY) (LZ
MA) (RTIME) (CMODE_PRIORITY) (c) 2001-20▒▒▒▒▒▒▒▒t, Inc.
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 0.957565] Serial: 8▒▒▒▒▒▒▒▒0 driver, 2 port
s, IRQ sharing disabled
ash: missing ]
root@OpenWrt:/# [ 0.964870] printk: console [ttyS0]▒▒▒▒▒▒▒▒▒
▒
ash: missing ]
root@OpenWrt:/# ▒▒▒▒.969094] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00
(irq = 20, base_bau䠽▒▒▒▒▒▒00) is a Palmchip BK-3103
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 0.978710] printk: console [ttyS0] enabled
ash: missing ]
root@OpenWrt:/# [ 0.978710] printk: console [ttyS0] enabled
ash: missing ]
root@OpenWrt:/# [ 0.987174] printk: bootconsole [early0] disabled
ash: missing ]
root@OpenWrt:/# [ 0.987174] printk: bootconsole [early0] disabled
ash: missing ]
root@OpenWrt:/# [ 0.998061] !!! nand page size = 2048, addr len=4
ash: missing ]
root@OpenWrt:/# [ 1.007900] mtk_nand_probe: alloc 13c0, at (ptrval) , btt((pt
rval), 100), ranfc_mtd:(ptrval)
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 1.016673] 10 fixed-partitions partitions found on MTD devic
e ra_nfc
ash: missing ]
root@OpenWrt:/# [ 1.023256] Creating 10 MTD partitions on "ra_nfc":
ash: missing ]
root@OpenWrt:/# [ 1.028253] 0x000000000000-0x000000040000 : "Bootloader"
ash: missing ]
root@OpenWrt:/# [ 1.034767] 0x000000040000-0x000000080000 : "Config"
ash: missing ]
root@OpenWrt:/# [ 1.041100] 0x000000080000-0x0000000c0000 : "Bdata"
ash: missing ]
root@OpenWrt:/# [ 1.047136] 0x0000000c0000-0x000000100000 : "factory"
ash: missing ]
root@OpenWrt:/# [ 1.053511] 0x000000100000-0x000000140000 : "crash"
ash: missing ]
root@OpenWrt:/# [ 1.059593] 0x000000140000-0x000000180000 : "crash_syslog"
ash: missing ]
root@OpenWrt:/# [ 1.066338] 0x000000180000-0x000000200000 : "reserved0"
ash: missing ]
root@OpenWrt:/# [ 1.072847] 0x000000200000-0x000000600000 : "kernel_stock"
ash: missing ]
root@OpenWrt:/# [ 1.080395] 0x000000600000-0x000000a00000 : "kernel"
ash: missing ]
root@OpenWrt:/# [ 1.087371] 0x000000a00000-0x000008000000 : "ubi"
ash: missing ]
root@OpenWrt:/# [ 1.118982] libphy: Fixed MDIO Bus: probed
ash: missing ]
root@OpenWrt:/# [ 1.139889] gsw: setting port4 to ephy mode
ash: missing ]
root@OpenWrt:/# [ 1.144243] ralink_soc_eth 10100000.ethernet eth0 (uninitiali
zed): port 0 link up (100Mbps/Full duplex)
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 1.153829] ralink_soc_eth 10100000.ethernet eth0 (uninitiali
zed): port 1 link up (100Mbps/Full duplex)
/bin/ash: syntax error: unexpected "("
root@OpenWrt:/# [ 1.163928] ralink_soc_eth 10100000.ethernet: loaded mt7620 d
river
ash: missing ]
root@OpenWrt:/# [ 1.170974] ralink_soc_eth 10100000.ethernet eth0: mediatek
一开始是默认的，
define Device/xiaomi_miwifi-r3
SOC := mt7620a
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 4096k
IMAGE_SIZE := 32768k
UBINIZE_OPTS := -E 5
IMAGES += kernel1.bin rootfs0.bin
IMAGE/kernel1.bin := append-kernel | check-size $$$$(KERNEL_SIZE)
IMAGE/rootfs0.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router R3
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci uboot-envtools
endef
TARGET_DEVICES += xiaomi_miwifi-r3
然后刷了没无线 WAN用不了就修改分区
KERNEL_SIZE := 4096k
IMAGE_SIZE := 32768k
UBINIZE_OPTS := -E 5
IMAGES += kernel1.bin rootfs0.bin
IMAGES += kernel1.bin rootfs0.bin pb-boot.bin boot.bin
IMAGE/kernel1.bin := append-kernel | check-size $$$$(KERNEL_SIZE)
IMAGE/rootfs0.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
IMAGE/rootfs0.bin := append-ubi | check-size
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/boot.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size
IMAGE/pb-boot.bin := append-kernel | pad-to $$(KERNEL_SIZE) |
append-kernel | pad-to $$(KERNEL_SIZE) |
append-ubi | check-size
DEVICE_VENDOR := Xiaomi
DEVICE_MODEL := Mi Router R3
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci uboot-envtools
生成的后缀有个boot的文件，刷了无限重启，