lede
lede copied to clipboard
K2P最新固件,端口转发中的“启用 NAT 环回”功能失效,内网无法访问转发端口
反馈bug/问题模板,提建议请删除
1.关于你要提交的问题
Q:是否搜索了issue (使用 "x" 选择)
- [x] 没有类似的issue
2. 详细叙述
(1) 具体问题
A:端口转发中的“启用 NAT 环回”功能失效,内网无法访问转发端口。外网可以正常访问转发端口。(不保留配置升级,默认选项编译)
(2) 路由器型号和固件版本
A:Phicomm K2P OpenWrt R22.6.16 / LuCI Master (git-22.174.19578-bdf3e99)
(3) 详细日志
A:没有产生端口转发相关的日志
刚刚发现内网无线可以访问转发端口,但速度很慢。内网通过网线则完全不能访问
另外发个内核日志吧
内核日志
[ 0.000000] Linux version 5.4.199 (zhen@zhen-ubuntu) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r4599-94e2af1bc)) #0 SMP Thu Jun 23 05:27:22 2022 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) [ 0.000000] MIPS: machine is Phicomm K2P [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] VPE topology {2,2} total 4 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] percpu: Embedded 14 pages/cpu s27024 r8192 d22128 u57344 [ 0.000000] pcpu-alloc: s27024 r8192 d22128 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Writing ErrCtl register=00000040 [ 0.000000] Readback ErrCtl register=00000040 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 120264K/131072K available (6166K kernel code, 272K rwdata, 1296K rodata, 1276K init, 236K bss, 10808K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 256 [ 0.000000] random: get_random_bytes called from start_kernel+0x36c/0x584 with crng_init=0 [ 0.000000] CPU Clock: 880MHz [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns [ 0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns [ 0.015494] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) [ 0.087833] pid_max: default: 32768 minimum: 301 [ 0.097168] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.111575] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.129844] rcu: Hierarchical SRCU implementation. [ 0.139996] smp: Bringing up secondary CPUs ... [ 0.138389] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.138399] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.138413] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.138522] CPU1 revision is: 0001992f (MIPS 1004Kc) [ 0.209615] Synchronize counters for CPU 1: done. [ 9.648823] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 9.648831] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 9.648838] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 9.648894] CPU2 revision is: 0001992f (MIPS 1004Kc) [ 0.330177] Synchronize counters for CPU 2: done. [ 9.767925] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 9.767934] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 9.767942] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 9.768006] CPU3 revision is: 0001992f (MIPS 1004Kc) [ 0.449753] Synchronize counters for CPU 3: done. [ 0.509359] smp: Brought up 1 node, 4 CPUs [ 0.522025] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.541470] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.555347] pinctrl core: initialized pinctrl subsystem [ 0.567227] NET: Registered protocol family 16 [ 0.588888] FPU Affinity set after 11720 emulations [ 0.607384] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512 [ 0.628007] random: fast init done [ 0.634727] clocksource: Switched to clocksource GIC [ 0.646504] NET: Registered protocol family 2 [ 0.655221] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.670031] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.686543] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.701729] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.715740] TCP: Hash tables configured (established 1024 bind 1024) [ 0.728473] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.741358] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.755397] NET: Registered protocol family 1 [ 0.763929] PCI: CLS 0 bytes, default 32 [ 1.004680] 4 CPUs re-calibrate udelay(lpj = 2924544) [ 1.016494] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 1.040664] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.052143] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 1.074804] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 1.086137] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 1.097379] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 1.109143] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 1.122945] printk: console [ttyS0] disabled [ 1.131385] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A [ 1.149313] printk: console [ttyS0] enabled [ 1.165864] printk: bootconsole [early0] disabled [ 1.187436] spi-mt7621 1e000b00.spi: sys_freq: 220000000 [ 1.199133] spi-nor spi0.0: mx25l12805d (16384 Kbytes) [ 1.209497] 5 fixed-partitions partitions found on MTD device spi0.0 [ 1.222154] Creating 5 MTD partitions on "spi0.0": [ 1.231699] 0x000000000000-0x000000030000 : "u-boot" [ 1.242980] 0x000000030000-0x000000040000 : "u-boot-env" [ 1.254984] 0x000000040000-0x000000050000 : "factory" [ 1.266366] 0x000000050000-0x0000000a0000 : "permanent_config" [ 1.279382] 0x0000000a0000-0x000001000000 : "firmware" [ 1.291208] 2 uimage-fw partitions found on MTD device firmware [ 1.303171] Creating 2 MTD partitions on "firmware": [ 1.313070] 0x000000000000-0x0000002705d2 : "kernel" [ 1.324297] 0x0000002705d2-0x000000f60000 : "rootfs" [ 1.335401] mtd: device 6 (rootfs) set to be root filesystem [ 1.346829] 1 squashfs-split partitions found on MTD device rootfs [ 1.359171] 0x000000870000-0x000000f60000 : "rootfs_data" [ 1.373499] [mtk_hw_init] reset_lock:0, force:0 [ 1.382548] [mtk_hw_init] execute fe cold reset [ 1.404064] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 22 [ 1.421715] mtk_soc_eth 1e100000.ethernet eth1: mediatek frame engine at 0xbe100000, irq 22 [ 1.438369] (unnamed net_device) (dummy): netif_napi_add() called with weight 256 [ 1.455775] mt7621-pci 1e140000.pcie: Parsing DT failed [ 1.469009] NET: Registered protocol family 10 [ 1.479434] Segment Routing with IPv6 [ 1.486874] NET: Registered protocol family 17 [ 1.495880] Bridge firewalling registered [ 1.504113] 8021q: 802.1Q VLAN Support v1.8 [ 1.564886] mt753x 1e110000.gsw: LAN/WAN VLAN setting=llllw [ 1.576131] mt753x 1e110000.gsw: Switch is MediaTek MT7530 rev 1 [ 3.023937] rt2880-pinmux pinctrl: pcie is already enabled [ 3.035050] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1) [ 3.049990] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0) [ 3.064792] mt7621-pci 1e140000.pcie: failed to parse bus ranges property: -22 [ 3.179078] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz [ 3.190182] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz [ 3.301164] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK) [ 3.315026] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [ 3.328883] mt7621-pci 1e140000.pcie: PCIE0 enabled [ 3.338594] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 [ 3.357298] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 [ 3.369959] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff] [ 3.383643] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 3.397331] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.408287] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 [ 3.420275] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 3.432753] pci 0000:00:00.0: reg 0x14: [mem 0x60200000-0x6020ffff] [ 3.445307] pci 0000:00:00.0: supports D1 [ 3.453273] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 3.466421] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280 [ 3.478440] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit] [ 3.492120] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link) [ 3.521061] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.531477] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 3.543606] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 3.557123] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 3.571502] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 3.584730] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 3.597895] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 3.611754] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 3.625272] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] [ 3.639649] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff] [ 3.653167] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff] [ 3.666689] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit] [ 3.681248] pci 0000:00:00.0: PCI bridge to [bus 01] [ 3.691130] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff] [ 3.704641] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 3.718163] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 3.733270] hctosys: unable to open rtc device (rtc0) [ 3.749528] VFS: Mounted root (squashfs filesystem) readonly on device 31:6. [ 3.768015] Freeing unused kernel memory: 1276K [ 3.777059] This architecture does not have kernel memory protection. [ 3.789871] Run /sbin/init as init process [ 4.919525] init: Console is alive [ 4.926772] init: - watchdog - [ 5.443956] mt753x 1e110000.gsw: Port 3 Link is Up - 1Gbps/Full [ 5.743487] mt753x 1e110000.gsw: Port 4 Link is Up - 1Gbps/Full [ 6.034065] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 6.395681] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 6.425185] init: - preinit - [ 8.564339] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 8.580493] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 8.597367] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.248028] random: jshn: uninitialized urandom read (4 bytes read) [ 9.330412] random: jshn: uninitialized urandom read (4 bytes read) [ 9.457764] random: jshn: uninitialized urandom read (4 bytes read) [ 11.834696] urandom_read: 6 callbacks suppressed [ 11.843971] random: procd: uninitialized urandom read (4 bytes read) [ 12.667136] crng init done [ 15.890804] mount_root: loading kmods from internal overlay [ 15.928635] kmodloader: loading kernel modules from //etc/modules-boot.d/* [ 15.943644] kmodloader: done loading kernel modules from //etc/modules-boot.d/* [ 16.531951] jffs2: notice: (595) jffs2_build_xattr_subsystem: complete building xattr subsystem, 80 of xdatum (20 unchecked, 60 orphan) and 100 of xref (10 dead, 60 orphan) found. [ 16.564871] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 16.586821] block: extroot: not configured [ 16.662361] jffs2: notice: (593) jffs2_build_xattr_subsystem: complete building xattr subsystem, 80 of xdatum (20 unchecked, 60 orphan) and 100 of xref (10 dead, 60 orphan) found. [ 16.696202] mount_root: loading kmods from internal overlay [ 16.731822] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/* [ 16.751787] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/* [ 16.902605] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab [ 16.921682] block: extroot: not configured [ 16.931423] mount_root: switching to jffs2 overlay [ 16.951439] overlayfs: upper fs does not support tmpfile. [ 16.966643] urandom-seed: Seeding with /etc/urandom.seed [ 17.014321] mtk_soc_eth 1e100000.ethernet eth0: Link is Down [ 17.037481] procd: - early - [ 17.043449] procd: - watchdog - [ 17.805029] procd: - watchdog - [ 17.814931] procd: - ubus - [ 18.104247] procd: - init - [ 19.096289] kmodloader: loading kernel modules from /etc/modules.d/* [ 19.118709] NET: Registered protocol family 38 [ 19.138119] tun: Universal TUN/TAP device driver, 1.6 [ 19.154653] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 19.253563] cryptodev: driver 1.12 loaded. [ 19.268459] mediatek_soc_hnat 1e100000.hnat: wan = eth1 [ 19.279025] mediatek_soc_hnat 1e100000.hnat: lan = eth0 [ 19.289469] mediatek_soc_hnat 1e100000.hnat: ppd = eth0 [ 19.299910] mediatek_soc_hnat 1e100000.hnat: gmac num = 2 [ 19.310700] mediatek_soc_hnat 1e100000.hnat: ppe num = 1 [ 19.321794] mediatek_soc_hnat 1e100000.hnat: ext devices = apcli0 [ 19.334023] mediatek_soc_hnat 1e100000.hnat: ext devices = apclii0 [ 19.346396] mediatek_soc_hnat 1e100000.hnat: ext devices = apclix0 [ 19.358720] mediatek_soc_hnat 1e100000.hnat: ext devices = ra0 [ 19.370348] mediatek_soc_hnat 1e100000.hnat: ext devices = rai0 [ 19.382158] mediatek_soc_hnat 1e100000.hnat: ext devices = rax0 [ 19.393979] mediatek_soc_hnat 1e100000.hnat: ext devices = wlan0 [ 19.405980] mediatek_soc_hnat 1e100000.hnat: ext devices = wlan1 [ 19.422689] mediatek_soc_hnat 1e100000.hnat: PPE0 entry number = 16384 [ 19.448942] mediatek_soc_hnat 1e100000.hnat: PPE0 hwnat start [ 19.460537] hnat roaming work enable [ 20.228223] register mt_drv [ 20.233905] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=24 [ 20.244709] pci 0000:00:00.0: enabling device (0006 -> 0007) [ 20.255997] mt_drv 0000:01:00.0: enabling device (0000 -> 0002) [ 20.283602] [ 20.283602] == pAd = 1125693a, size = 4035968, Status=0 == [ 20.297508] pAd->PciHif.CSRBaseAddress =0xc0c80000, csr_addr=0xc0c80000! [ 20.310847] RTMPInitPCIeDevice():device_id=0x7615 [ 20.320232] mt_pci_chip_cfg(): HWVer=0x8a10, FWVer=0x8a10, pAd->ChipID=0x7615 [ 20.334430] mt_pci_chip_cfg(): HIF_SYS_REV=0x76150001 [ 20.344476] AP Driver version-5.0.4.0 [ 20.351762] RtmpChipOpsHook(223): Not support for HIF_MT yet! MACVersion=0x0 [ 20.365787] mt7615_init()--> [ 20.371504] Use the default ePAeLNA bin image! [ 20.380347] Use the default /etc_ro/wlan/MT7615E_EEPROM1.bin bin image! [ 20.393525] main_virtual_if_open [ 36.579258] RtmpOSFileOpen(): Error 2 opening /etc/wireless/l1profile.dat [ 36.593628] load l1profile succeed! [ 36.600714] driver_own()::Try to Clear FW Own... [ 36.920996] driver_own()::Success to clear FW Own [ 36.933855] APWdsInitialize():WdsEntry Number=4 [ 37.017168] [multi_profile_merge_5g_only] DBDC_MODE=1 [ 37.032873] multi-profile merge success, en:1,pf1_num:4,pf2_num:4,total:8 [ 37.046450] Open file "/tmp/profiles/mt_dbdc.dat" to store DBDC cfg! (14) [ 37.060590] RT_CfgSetMacAddress : invalid length (0) [ 37.071441] RT_CfgSetMacAddress : invalid length (0) [ 37.084245] SSID[0]=zhen, EdcaIdx=0 [ 37.092426] SSID[4]=janewhere5, EdcaIdx=0 [ 37.101552] DBDC Mode=1, eDBDC_mode = 1 [ 37.109889] BSS0 PhyMode=14 [ 37.115497] wmode_band_equal(): Band Equal! [ 37.123814] BSS1 PhyMode=14 [ 37.129395] BSS2 PhyMode=14 [ 37.135170] BSS3 PhyMode=14 [ 37.140717] BSS4 PhyMode=49 [ 37.146305] BSS5 PhyMode=49 [ 37.151856] BSS6 PhyMode=49 [ 37.157439] BSS7 PhyMode=49 [ 37.164608] BandSteering=0 [ 37.170268] BndStrgBssIdx=1;0;0;0;1;0;0;0 [ 37.178538] [TxPower] BAND0: 100, BAND1: 100 [ 37.189840] [PERCENTAGEenable] BAND0: 1, BAND1: 1 [ 37.199663] [BFBACKOFFenable] BAND0: 0, BAND1: 0 [ 37.209205] CalCacheApply = 0 [ 37.216437] FragThreshold[0]=2346 [ 37.223018] FragThreshold[1]=2346 [ 37.229655] FragThreshold[2]=2346 [ 37.236278] FragThreshold[3]=2346 [ 37.242861] FragThreshold[4]=2346 [ 37.249494] FragThreshold[5]=2346 [ 37.256118] FragThreshold[6]=2346 [ 37.262701] FragThreshold[7]=2346 [ 37.270046] Valid=1 [ 37.274206] APAifsn[0]=3 [ 37.279266] APAifsn[1]=7 [ 37.284296] APAifsn[2]=1 [ 37.289356] APAifsn[3]=1 [ 37.294610] Valid=1 [ 37.298808] APAifsn[0]=3 [ 37.303838] APAifsn[1]=7 [ 37.308909] APAifsn[2]=1 [ 37.313941] APAifsn[3]=1 [ 37.327926] BSSAifsn[0]=3 [ 37.333124] BSSAifsn[1]=7 [ 37.338356] BSSAifsn[2]=2 [ 37.343559] BSSAifsn[3]=2 [ 37.349040] BSSAifsn[0]=3 [ 37.354236] BSSAifsn[1]=7 [ 37.359468] BSSAifsn[2]=2 [ 37.365126] BSSAifsn[3]=2 [ 37.370669] BSSAifsn[0]=3 [ 37.375918] BSSAifsn[1]=7 [ 37.381123] BSSAifsn[2]=2 [ 37.386357] BSSAifsn[3]=2 [ 37.391789] BSSAifsn[0]=3 [ 37.397023] BSSAifsn[1]=7 [ 37.402226] BSSAifsn[2]=2 [ 37.407459] BSSAifsn[3]=2 [ 37.412890] BSSAifsn[0]=3 [ 37.418123] BSSAifsn[1]=7 [ 37.423327] BSSAifsn[2]=2 [ 37.428560] BSSAifsn[3]=2 [ 37.433992] BSSAifsn[0]=3 [ 37.439226] BSSAifsn[1]=7 [ 37.444428] BSSAifsn[2]=2 [ 37.449661] BSSAifsn[3]=2 [ 37.455136] BSSAifsn[0]=3 [ 37.460334] BSSAifsn[1]=7 [ 37.465564] BSSAifsn[2]=2 [ 37.470768] BSSAifsn[3]=2 [ 37.476252] BSSAifsn[0]=3 [ 37.481449] BSSAifsn[1]=7 [ 37.486680] BSSAifsn[2]=2 [ 37.491883] BSSAifsn[3]=2 [ 37.499307] DfsZeroWait Support=0/0 [ 37.507613] DfsZeroWaitCacTime=255/255 [ 37.516085] read_etxbf: ETxBfEnCond = 0 [ 37.523701] read_etxbf: BSSID[0] [ 37.530143] read_etxbf: MBSS[0] ETxBfEnCond = 0 [ 37.539183] read_etxbf: ETxBfEnCond = 0 [ 37.546836] read_etxbf: BSSID[1] [ 37.553248] read_etxbf: MBSS[1] ETxBfEnCond = 0 [ 37.562282] read_etxbf: ETxBfEnCond = 0 [ 37.569937] read_etxbf: BSSID[2] [ 37.576383] read_etxbf: MBSS[2] ETxBfEnCond = 0 [ 37.585424] read_etxbf: ETxBfEnCond = 0 [ 37.593042] read_etxbf: BSSID[3] [ 37.599482] read_etxbf: MBSS[3] ETxBfEnCond = 0 [ 37.608523] read_etxbf: ETxBfEnCond = 1 [ 37.616177] read_etxbf: BSSID[4] [ 37.622591] read_etxbf: MBSS[4] ETxBfEnCond = 1 [ 37.631626] read_etxbf: ETxBfEnCond = 1 [ 37.639281] read_etxbf: BSSID[5] [ 37.645725] read_etxbf: MBSS[5] ETxBfEnCond = 1 [ 37.654766] read_etxbf: ETxBfEnCond = 1 [ 37.662384] read_etxbf: BSSID[6] [ 37.668823] read_etxbf: MBSS[6] ETxBfEnCond = 1 [ 37.677862] read_etxbf: ETxBfEnCond = 1 [ 37.685516] read_etxbf: BSSID[7] [ 37.691930] read_etxbf: MBSS[7] ETxBfEnCond = 1 [ 37.702346] [RTMPSetProfileParameters]Disable DFS/Zero wait=0/0 [ 37.767338] [rtmp_read_ap_client_from_file] pf1=4 pf2=4 [ 37.781361] APWdsInitialize():WdsEntry Number=4 [ 37.790398] WDS-Enable mode=0 [ 37.800804] HT: WDEV[0] Ext Channel = BELOW [ 37.809151] HT: WDEV[1] Ext Channel = BELOW [ 37.817502] HT: WDEV[2] Ext Channel = BELOW [ 37.825865] HT: WDEV[3] Ext Channel = BELOW [ 37.834182] HT: WDEV[4] Ext Channel = ABOVE [ 37.842528] HT: WDEV[5] Ext Channel = ABOVE [ 37.850878] HT: WDEV[6] Ext Channel = ABOVE [ 37.859226] HT: WDEV[7] Ext Channel = ABOVE [ 37.901079] WtcSetMaxStaNum: BssidNum:8, MaxStaNum:117 (WdsNum:4, ApcliNum:2, MaxNumChipRept:32), MinMcastWcid:118 [ 37.921952] Top Init Done! [ 37.927386] Use dev_alloc_skb [ 37.934558] RX[0] DESC c0a105cc size = 16384 [ 37.945032] RX[1] DESC 6c594da0 size = 8192 [ 37.954032] cut_through_init(): ct sw token number = 4095 [ 37.965205] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096 [ 37.980699] cut_through_token_list_init(): 793e655b,793e655b [ 37.992488] cut_through_token_list_init(): TokenList inited done!id_head/tail=0/4096 [ 38.007991] cut_through_token_list_init(): 93fe36d3,93fe36d3 [ 38.019312] Hif Init Done! [ 38.024735] ctl->txq = 29c36ccb [ 38.030976] ctl->rxq = 679f6cf5 [ 38.037248] ctl->ackq = 238784ce [ 38.043663] ctl->kickq = 7921b28d [ 38.050281] ctl->tx_doneq = 701fec53 [ 38.057423] ctl->rx_doneq = 7db19674 [ 38.064598] Parsing patch header [ 38.071034] Built date: [ 38.071041] 2 [ 38.076278] 0 [ 38.079404] 1 [ 38.082523] 8 [ 38.085676] 0 [ 38.088802] 5 [ 38.091924] 1 [ 38.095078] 8 [ 38.098206] 1 [ 38.101326] 0 [ 38.104443] 0 [ 38.107595] 6 [ 38.110722] 0 [ 38.113843] 4 [ 38.116994] a [ 38.120122] [ 38.126217] [ 38.129171] Platform: [ 38.129175] A [ 38.134026] L [ 38.137186] P [ 38.140316] S [ 38.143437] [ 38.149536] HW/SW version: [ 38.149539] 0x [ 38.155288] 8a [ 38.158588] 10 [ 38.161881] 8a [ 38.165209] 10 [ 38.168509] [ 38.174794] Patch version: [ 38.174798] 0x [ 38.180519] 00 [ 38.183813] 00 [ 38.187141] 00 [ 38.190442] 10 [ 38.193735] [ 38.200014] Target address: 0x80000, length: 11072 [ 38.210163] patch is not ready && get semaphore success [ 38.220799] EventGenericEventHandler: CMD Success [ 38.230474] MtCmdPatchFinishReq [ 38.248137] EventGenericEventHandler: CMD Success [ 38.257917] release patch semaphore [ 38.268448] WfMcuHwInit: Before NICLoadFirmware, check ICapMode = 0 [ 38.281074] Parsing CPU 0 fw tailer [ 38.288122] Chip ID: [ 38.288132] 0x [ 38.292952] 04 [ 38.296408] [ 38.302784] Eco version: [ 38.302794] 0x [ 38.308275] 00 [ 38.311634] [ 38.318026] Region number: [ 38.318047] 0x [ 38.323914] 00 [ 38.327345] [ 38.333734] Format version: [ 38.333744] 0x [ 38.339807] 00 [ 38.343210] [ 38.349624] Ram version: [ 38.349640] _ [ 38.355611] r [ 38.358823] e [ 38.362014] s [ 38.365657] e [ 38.368828] r [ 38.372072] v [ 38.375643] e [ 38.378836] d [ 38.382004] _ [ 38.385238] [ 38.391377] Built date: [ 38.391389] 2 [ 38.396693] 0 [ 38.399933] 1 [ 38.403146] 9 [ 38.406416] 0 [ 38.409584] 3 [ 38.412784] 0 [ 38.416051] 7 [ 38.419219] 0 [ 38.422370] 1 [ 38.425603] 5 [ 38.428765] 6 [ 38.432347] 0 [ 38.435548] 3 [ 38.438690] [ 38.441823] [ 38.448015] Common crc: 0x0 [ 38.453757] Parsing tailer region 0 [ 38.460796] Feature set: [ 38.460805] 0x [ 38.466279] 01 [ 38.469595] [ 38.475942] Target address: 0x84000, Download size: 409600 [ 38.487155] Parsing tailer region 1 [ 38.494124] Feature set: [ 38.494128] 0x [ 38.499617] 01 [ 38.502946] [ 38.509290] Target address: 0x209c400, Download size: 43328 [ 38.520803] EventGenericEventHandler: CMD Success [ 38.535891] EventGenericEventHandler: CMD Success [ 38.545998] MtCmdFwStartReq: override = 0x1, address = 0x84000 [ 38.557763] EventGenericEventHandler: CMD Success [ 38.567195] Parsing CPU 1 fw tailer [ 38.574128] Chip ID: [ 38.574132] 0x [ 38.578849] 04 [ 38.582143] [ 38.588417] Eco version: [ 38.588422] 0x [ 38.593789] 00 [ 38.597116] [ 38.603360] Region number: [ 38.603362] 0x [ 38.609153] 00 [ 38.612502] [ 38.618967] Format version: [ 38.618978] 0x [ 38.624996] 00 [ 38.628338] [ 38.634652] Ram version: [ 38.634664] _ [ 38.640168] r [ 38.643406] e [ 38.646685] s [ 38.650315] e [ 38.653470] r [ 38.656708] v [ 38.659860] e [ 38.663051] d [ 38.666306] _ [ 38.669474] [ 38.675718] Built date: [ 38.675730] 2 [ 38.681024] 0 [ 38.684247] 1 [ 38.687562] 9 [ 38.690769] 0 [ 38.693986] 4 [ 38.697239] 1 [ 38.700426] 5 [ 38.703564] 1 [ 38.706761] 5 [ 38.709900] 4 [ 38.713021] 1 [ 38.716200] 4 [ 38.719338] 9 [ 38.722461] [ 38.725646] [ 38.731738] Common crc: 0x0 [ 38.737527] Parsing tailer region 0 [ 38.744464] Feature set: [ 38.744469] 0x [ 38.749919] 01 [ 38.753229] [ 38.759589] Target address: 0x90000000, Download size: 122608 [ 38.771669] EventGenericEventHandler: CMD Success [ 38.783230] MtCmdFwStartReq: override = 0x4, address = 0x0 [ 38.829643] EventGenericEventHandler: CMD Success [ 38.898930] MCU Init Done! [ 38.904348] efuse_probe: efuse = 10000212 [ 38.912388] RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5 [ 38.923263] RtmpEepromGetDefault::e2p_dafault=1 [ 38.932440] RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1 [ 38.947673] NVM is FLASH mode. dev_idx [0] FLASH OFFSET [0x0] [ 38.964290] [34mNICReadEEPROMParameters: EEPROM 0x52 b300[m [ 46.457588] Country Region from e2p = 101 [ 46.465600] mt7615_antenna_default_reset(): TxPath = 4, RxPath = 4 [ 46.477941] mt7615_antenna_default_reset(): DBDC BAND0 TxPath = 2, RxPath = 2 [ 46.492403] mt7615_antenna_default_reset(): DBDC BAND1 TxPath = 2, RxPath = 2 [ 46.506660] RcRadioInit(): DbdcMode=1, ConcurrentBand=2 [ 46.517100] RcRadioInit(): pRadioCtrl=e0839e92,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf [ 46.533920] RcRadioInit(): pRadioCtrl=66702db0,Band=1,rfcap=2,channel=36,PhyMode=1 extCha=0xf [ 46.550919] rcUpdateBandForBFMU PhyCtrl[0].RadioCtrl.IsBfBand = 1 [ 46.563064] rcUpdateBandForBFMU PhyCtrl[1].RadioCtrl.IsBfBand = 0 [ 46.575220] TxBfModuleEnCtrl:i = 0, pRadioCtrl->IsBfBand = 1 [ 46.586518] TxBfModuleEnCtrl:i = 1, pRadioCtrl->IsBfBand = 0 [ 46.597808] TxBfModuleEnCtrl:u1BfNum = 1, u1BfBitmap = 1, u1BfSelBand[0] = 0 [ 46.612048] MtCmdSetDbdcCtrl:(ret = 0) [ 46.619559] MtSingleSkuLoadParam: RF_LOCKDOWN Feature OFF !!! [ 46.631139] RtmpOSFileOpen(): Error 2 opening /etc_ro/Wireless/RT2860AP/SingleSKU.dat [ 46.646751] --> Error opening /etc_ro/Wireless/RT2860AP/SingleSKU.dat [ 46.659606] MtBfBackOffLoadParam: RF_LOCKDOWN Feature OFF !!! [ 46.671080] RtmpOSFileOpen(): Error 2 opening /etc_ro/Wireless/RT2860AP/SingleSKU.dat [ 46.686696] EEPROM Init Done! [ 46.692591] mt_mac_init()--> [ 46.698337] mt7615_init_mac_cr()--> [ 46.705313] mt7615_init_mac_cr(): TMAC_TRCR0=0x82783c8c [ 46.715749] mt7615_init_mac_cr(): TMAC_TRCR1=0x82783c8c [ 46.726170] IsBfBand = 1 [ 46.924029] TxBfModuleEnCtrl:i = 1, pRadioCtrl->IsBfBand = 0 [ 46.935315] TxBfModuleEnCtrl:u1BfNum = 1, u1BfBitmap = 1, u1BfSelBand[0] = 0 [ 46.949463] MtCmdEDCCACtrl: BandIdx: 0, EDCCACtrl: 1 [ 46.959368] MtCmdEDCCACtrl: BandIdx: 1, EDCCACtrl: 1 [ 46.984122] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0 [ 46.998730] hc_radio_res_request(): wdev=8, hobj is not ready! [ 47.012180] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0 [ 47.026702] hc_radio_res_request(): wdev=9, hobj is not ready! [ 47.040692] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0 [ 47.055275] hc_radio_res_request(): wdev=10, hobj is not ready! [ 47.069555] The new WDS interface MAC = 00:00:00:00:00:00, MacTabMatchWCID = 0 [ 47.084198] hc_radio_res_request(): wdev=11, hobj is not ready! [ 47.098154] Total allocated 4 WDS interfaces! [ 47.112914] WtcSetMaxStaNum: BssidNum:8, MaxStaNum:117 (WdsNum:4, ApcliNum:2, MaxNumChipRept:32), MinMcastWcid:118 [ 47.252093] RedInit: set CR4/N9 RED Enable to 1. [ 47.261361] RedInit: RED Initiailize Done. [ 47.269656] cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2. [ 47.281715] RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP [ 47.294291] wifi_sys_open(), wdev idx = 0 [ 47.302350] wdev_attr_update(): wdevId0 = 74:7d:24:92:2a:97 [ 47.313480] rcUpdateBandForBFMU PhyCtrl[0].RadioCtrl.IsBfBand = 1 [ 47.325625] rcUpdateBandForBFMU PhyCtrl[1].RadioCtrl.IsBfBand = 0 [ 47.337763] TxBfModuleEnCtrl:i = 0, pRadioCtrl->IsBfBand = 1 [ 47.349032] TxBfModuleEnCtrl:i = 1, pRadioCtrl->IsBfBand = 0 [ 47.360300] TxBfModuleEnCtrl:u1BfNum = 1, u1BfBitmap = 1, u1BfSelBand[0] = 0 [ 47.374652] MtCmdSetDbdcCtrl:(ret = 0) [ 47.382289] [1;33m [RadarStateCheck] RD_NORMAL_MODE [m [ 47.393125] mt7615_apply_cal_data() : eeprom 0x52 bit 1 is 0, do runtime cal , skip RX reload [ 47.410125] mt7615_apply_cal_data() : eeprom 0x52 bit 0 is 0, do runtime cal , skip TX reload [ 47.427120] MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0 [ 47.445138] BW = 1,TXStream = 2, RXStream = 2, scan(0) [ 47.706097] [DfsCacNormalStart] Normal start. Enable MAC TX [ 47.718535] Caller: wlan_operate_init+0xa4/0x11c [mt_wifi] [ 47.729546] phy_mode=14, ch=11, wdev_type=1 [ 47.737983] ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 [ 47.756561] ht_cap->HtCapParm: mdpu_density=4, ampdu_factor=3 [ 47.768574] AP inf up for ra_0(func_idx) OmacIdx=0 [ 47.778255] AsicRadioOnOffCtrl(): DbdcIdx=0 RadioOn [ 47.788438] ApAutoChannelAtBootUp-----------------> [ 47.798409] ApAutoChannelAtBootUp: AutoChannelBootup = 0 [ 47.809003] ApAutoChannelAtBootUp mbss_virtual_if_open [ 55.770109] RTMP_COM_IoctlHandle -> CMD_RTPRIV_IOCTL_VIRTUAL_INF_UP [ 55.782890] wifi_sys_open(), wdev idx = 4 [ 55.790999] wdev_attr_update(): wdevId4 = 76:7d:24:c2:2a:97 [ 55.802234] rcUpdateBandForBFMU PhyCtrl[0].RadioCtrl.IsBfBand = 0 [ 55.814491] rcUpdateBandForBFMU PhyCtrl[1].RadioCtrl.IsBfBand = 1 [ 55.826735] TxBfModuleEnCtrl:i = 0, pRadioCtrl->IsBfBand = 0 [ 55.838073] TxBfModuleEnCtrl:i = 1, pRadioCtrl->IsBfBand = 1 [ 55.849432] TxBfModuleEnCtrl:u1BfNum = 1, u1BfBitmap = 1, u1BfSelBand[0] = 1 [ 55.863978] MtCmdSetDbdcCtrl:(ret = 0) [ 55.871769] [1;33m [RadarStateCheck] RD_NORMAL_MODE [m [ 55.882848] mt7615_apply_cal_data() : eeprom 0x52 bit 1 is 0, do runtime cal , skip RX reload [ 55.899882] mt7615_apply_cal_data() : eeprom 0x52 bit 0 is 0, do runtime cal , skip TX reload [ 55.916906] MtCmdChannelSwitch: control_chl = 149,control_ch2=0, central_chl = 155 DBDCIdx= 1, Band= 0 [ 55.935489] BW = 2,TXStream = 2, RXStream = 2, scan(0) [ 56.411410] EventExtEventHandler: Unknown Ext Event(7) [ 56.511440] EventExtEventHandler: Unknown Ext Event(7) [ 56.611492] EventExtEventHandler: Unknown Ext Event(7) [ 56.711513] EventExtEventHandler: Unknown Ext Event(7) [ 56.811559] EventExtEventHandler: Unknown Ext Event(7) [ 56.911589] EventExtEventHandler: Unknown Ext Event(7) [ 57.011639] EventExtEventHandler: Unknown Ext Event(7) [ 57.028280] [DfsCacNormalStart] Normal start. Enable MAC TX [ 57.040541] Caller: wlan_operate_init+0xa4/0x11c [mt_wifi] [ 57.051522] phy_mode=49, ch=149, wdev_type=1 [ 57.060042] ht_cap->HtCapInfo: ldpc=1,ch_width=1,gf=0,sgi20=1,sgi40=1,tx_stbc=1,rx_stbc=1,amsdu_size=1 [ 57.078648] ht_cap->HtCapParm: mdpu_density=4, ampdu_factor=3 [ 57.090461] AP inf up for ra_4(func_idx) OmacIdx=20 [ 57.100397] AsicRadioOnOffCtrl(): DbdcIdx=1 RadioOn [ 57.110373] ApAutoChannelAtBootUp-----------------> [ 57.120122] ApAutoChannelAtBootUp: AutoChannelBootup = 0 [ 57.130840] ApAutoChannelAtBootUp
你的WIFI正常吗?我的有线OK,WiFi默认编译的,速度几乎没有
你的WIFI正常吗?我的有线OK,WiFi默认编译的,速度几乎没有
正常,手机跑个宽带测速下载600M左右,应该还能更高。 可以看下交换机设置里,VLAN 1里的CPU (eth0) 要选“未标记” 否则WIFI就不行。也可以重置下路由器恢复默认配置
你的WIFI正常吗?我的有线OK,WiFi默认编译的,速度几乎没有
正常,手机跑个宽带测速下载600M左右,应该还能更高。 可以看下交换机设置里,VLAN 1里的CPU (eth0) 要选“未标记” 否则WIFI就不行。也可以重置下路由器恢复默认配置
兄弟你好,再请教一下,我的是k2p和你一样,我写的固件里面只有无线和接口设置,没有交换机设置,在接口设置里面WAN默认的就是WAN,eth0默认是没有打钩的,也找不到CPU这个选项,请问一下是再哪个选项下面可以找到?谢谢你。。。
你的WIFI正常吗?我的有线OK,WiFi默认编译的,速度几乎没有
正常,手机跑个宽带测速下载600M左右,应该还能更高。 可以看下交换机设置里,VLAN 1里的CPU (eth0) 要选“未标记” 否则WIFI就不行。也可以重置下路由器恢复默认配置
兄弟你好,再请教一下,我的是k2p和你一样,我写的固件里面只有无线和接口设置,没有交换机设置,在接口设置里面WAN默认的就是WAN,eth0默认是没有打钩的,也找不到CPU这个选项,请问一下是再哪个选项下面可以找到?谢谢你。。。
可能是编译的时候配置选项有问题,make distclean后再重新设置编译一下试试吧
谢谢
你的WIFI正常吗?我的有线OK,WiFi默认编译的,速度几乎没有
正常,手机跑个宽带测速下载600M左右,应该还能更高。 可以看下交换机设置里,VLAN 1里的CPU (eth0) 要选“未标记” 否则WIFI就不行。也可以重置下路由器恢复默认配置
兄弟你好,再请教一下,我的是k2p和你一样,我写的固件里面只有无线和接口设置,没有交换机设置,在接口设置里面WAN默认的就是WAN,eth0默认是没有打钩的,也找不到CPU这个选项,请问一下是再哪个选项下面可以找到?谢谢你。。。
可能是编译的时候配置选项有问题,make distclean后再重新设置编译一下试试吧
再次请教一下,我在重新编译的时候luci找不到交换机的选项再哪里,请问交换机选项再哪个位置可以找到,再次感谢。。
你的WIFI正常吗?我的有线OK,WiFi默认编译的,速度几乎没有
正常,手机跑个宽带测速下载600M左右,应该还能更高。 可以看下交换机设置里,VLAN 1里的CPU (eth0) 要选“未标记” 否则WIFI就不行。也可以重置下路由器恢复默认配置
兄弟你好,再请教一下,我的是k2p和你一样,我写的固件里面只有无线和接口设置,没有交换机设置,在接口设置里面WAN默认的就是WAN,eth0默认是没有打钩的,也找不到CPU这个选项,请问一下是再哪个选项下面可以找到?谢谢你。。。
可能是编译的时候配置选项有问题,make distclean后再重新设置编译一下试试吧
再次请教一下,我在重新编译的时候luci找不到交换机的选项再哪里,请问交换机选项再哪个位置可以找到,再次感谢。。
不需要额外修改,默认编译,路由器刷完固件里面就有了
楼主的问题解决了吗?
没有,等待大佬回复中……现在临时的替代方案是关闭NAT环回,修改路由器的hosts
我也遇到了这个问题,使用无线网络访问本地的服务,速度只有几十KB,有线网络一切正常,这要怎么解决呢?
@sonytxl 你的问题解决了吗?
修改/etc/sysctl.conf,添加:
net.bridge.bridge-nf-call-arptables=0
net.bridge.bridge-nf-call-ip6tables=0
net.bridge.bridge-nf-call-iptables=0
然后执行sysctl -p 也可以在编译前直接修改/lede/package/base-files/files/etc/sysctl.conf 搜索了一下ISSUES,好像这些配置总是随着内核变来变去, 所以最佳方案应该就是这样修改sysctl.conf文件了
修改/etc/sysctl.conf,添加:
net.bridge.bridge-nf-call-arptables=0 net.bridge.bridge-nf-call-ip6tables=0 net.bridge.bridge-nf-call-iptables=0
然后执行sysctl -p 也可以在编译前直接修改/lede/package/base-files/files/etc/sysctl.conf 搜索了一下ISSUES,好像这些配置总是随着内核变来变去, 所以最佳方案应该就是这样修改sysctl.conf文件了
sysctl: error: 'net.bridge/bridge-nf-call-arptables' is an unknown key sysctl: error: 'net.bridge/bridge-nf-call-ip6tables' is an unknown key sysctl: error: 'net.bridge/bridge-nf-call-iptables' is an unknown key 会出现这个。这个方法以前有效,现在不行了 .会自动变成/ 很奇怪
我的是K2P,默认配置编译,5.4内核 可能是变斜杠的问题,找找变斜杠的原因吧