coolsnowwolf
Request to Add Support for Sagemcom Fast 5866T
详细叙述
Hello LEDE Developers,
I would like to request device support for the Sagemcom Fast 5866T router/modem.
Device Information:
- Model: Sagemcom Fast 5866T
- Brand: Sagemcom
- Type: 5G CPE / Router
- Chipset / Platform: Qualcomm Snapdragon X55 (SDX55, possibly combined with IPQ807x)
- CPU Architecture: ARM64 (quad-core)
- Memory: 1 GB RAM
- Storage: 256 MB NAND Flash
- Wi-Fi: Dual-band (2.4 GHz & 5 GHz, Wi-Fi 6 capable)
- Ports: 1 × WAN/LAN (RJ-45), 2 × LAN, USB-C (power/data)
- OS (stock): Sagemcom OEM firmware based on Android/Linux
Reason for request: The Sagemcom Fast 5866T is a common 5G home router distributed by several ISPs in Asia and Europe. It has good hardware capabilities and is based on a Qualcomm platform that is already partially supported in OpenWrt (IPQ807x/SDX55). Adding support would enable community development, improved performance, and open-source firmware options for users.
What I can provide for developers:
- Full hardware photos (board, ports, chipset)
- Boot logs (UART/ADB if needed)
- Access to the device for testing (remote or local)
Please let me know what specific information or dumps are required to begin adding support. I’m willing to help collect all needed data.
Thank you for your work on LEDE!
重复 issue
- [x] 没有类似的 issue
具体型号
5866T
详细日志
5866t
This machine has secure boot enabled, how do you flash it?
Some versions of the Fast 5866T already run QWRT/QSDK, and I don't know how the seller bypasses it.
Hey could you please share the board photos and these components on the board?. For NAND flash could you provide the part number.
- NAND flash.
- Memory
- UART Port
Hey could you please share the board photos and these components on the board?. For NAND flash could you provide the part number.
- NAND flash.
- Memory
- UART Port
Photo of GND, TX, RX, VCC? Port 115200 ` root@QWRT:~# lsblk -o NAME,SIZE,TYPE,MOUNTPOINT NAME SIZE TYPE MOUNTPOINT loop0 234.8M loop /overlay mmcblk0 7.3G disk ├─mmcblk0p1 512K part ├─mmcblk0p2 256K part ├─mmcblk0p3 256K part ├─mmcblk0p4 1.5M part ├─mmcblk0p5 1.5M part ├─mmcblk0p6 256K part ├─mmcblk0p7 256K part ├─mmcblk0p8 256K part ├─mmcblk0p9 256K part ├─mmcblk0p10 256K part ├─mmcblk0p11 256K part ├─mmcblk0p12 256K part ├─mmcblk0p13 256K part ├─mmcblk0p14 256K part ├─mmcblk0p15 640K part ├─mmcblk0p16 640K part ├─mmcblk0p17 256K part ├─mmcblk0p18 6M part ├─mmcblk0p19 300M part /rom ├─mmcblk0p20 4M part ├─mmcblk0p21 512K part └─mmcblk0p22 6.5G part mmcblk0boot0 4M disk mmcblk0boot1 4M disk root@QWRT:~# fdisk -l /dev/mmcblk0 Disk /dev/mmcblk0: 7.28 GiB, 7818182656 bytes, 15269888 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 98101B32-BBE2-4BF2-A06E-2BB33D000C20
Device Start End Sectors Size Type /dev/mmcblk0p1 34 1057 1024 512K unknown /dev/mmcblk0p2 1058 1569 512 256K unknown /dev/mmcblk0p3 1570 2081 512 256K unknown /dev/mmcblk0p4 2082 5153 3072 1.5M unknown /dev/mmcblk0p5 5154 8225 3072 1.5M unknown /dev/mmcblk0p6 8226 8737 512 256K unknown /dev/mmcblk0p7 8738 9249 512 256K unknown /dev/mmcblk0p8 9250 9761 512 256K unknown /dev/mmcblk0p9 9762 10273 512 256K unknown /dev/mmcblk0p10 10274 10785 512 256K unknown /dev/mmcblk0p11 10786 11297 512 256K unknown /dev/mmcblk0p12 11298 11809 512 256K unknown /dev/mmcblk0p13 11810 12321 512 256K unknown /dev/mmcblk0p14 12322 12833 512 256K unknown /dev/mmcblk0p15 12834 14113 1280 640K unknown /dev/mmcblk0p16 14114 15393 1280 640K unknown /dev/mmcblk0p17 15394 15905 512 256K unknown /dev/mmcblk0p18 15906 28193 12288 6M unknown /dev/mmcblk0p19 28194 642593 614400 300M unknown /dev/mmcblk0p20 642594 650785 8192 4M unknown /dev/mmcblk0p21 650786 651809 1024 512K unknown /dev/mmcblk0p22 651810 14283297 13631488 6.5G unknown root@QWRT:~# parted /dev/mmcblk0 print Model: MMC 8GTF4R (sd/mmc) Disk /dev/mmcblk0: 7818MB Sector size (logical/physical): 512B/512B Partition Table: gpt Disk Flags:
Number Start End Size File system Name Flags 1 17.4kB 542kB 524kB 0:SBL1 2 542kB 804kB 262kB 0:BOOTCONFIG 3 804kB 1066kB 262kB 0:BOOTCONFIG1 4 1066kB 2639kB 1573kB 0:QSEE 5 2639kB 4212kB 1573kB 0:QSEE_1 6 4212kB 4474kB 262kB 0:DEVCFG 7 4474kB 4736kB 262kB 0:DEVCFG_1 8 4736kB 4998kB 262kB 0:APDP 9 4998kB 5260kB 262kB 0:APDP_1 10 5260kB 5522kB 262kB 0:RPM 11 5522kB 5785kB 262kB 0:RPM_1 12 5785kB 6047kB 262kB 0:CDT 13 6047kB 6309kB 262kB 0:CDT_1 14 6309kB 6571kB 262kB 0:APPSBLENV 15 6571kB 7226kB 655kB 0:APPSBL 16 7226kB 7882kB 655kB 0:APPSBL_1 17 7882kB 8144kB 262kB 0:ART 18 8144kB 14.4MB 6291kB 0:HLOS 19 14.4MB 329MB 315MB rootfs 20 329MB 333MB 4194kB 0:WIFIFW 21 333MB 334MB 524kB 0:ETHPHYFW 22 334MB 7313MB 6979MB rootfs_data
root@QWRT:~# cat /proc/partitions major minor #blocks name
1 0 4096 ram0 1 1 4096 ram1 1 2 4096 ram2 1 3 4096 ram3 1 4 4096 ram4 1 5 4096 ram5 1 6 4096 ram6 1 7 4096 ram7 1 8 4096 ram8 1 9 4096 ram9 1 10 4096 ram10 1 11 4096 ram11 1 12 4096 ram12 1 13 4096 ram13 1 14 4096 ram14 1 15 4096 ram15 7 0 240448 loop0 179 0 7634944 mmcblk0 179 1 512 mmcblk0p1 179 2 256 mmcblk0p2 179 3 256 mmcblk0p3 179 4 1536 mmcblk0p4 179 5 1536 mmcblk0p5 179 6 256 mmcblk0p6 179 7 256 mmcblk0p7 179 8 256 mmcblk0p8 179 9 256 mmcblk0p9 179 10 256 mmcblk0p10 179 11 256 mmcblk0p11 179 12 256 mmcblk0p12 179 13 256 mmcblk0p13 179 14 256 mmcblk0p14 179 15 640 mmcblk0p15 179 16 640 mmcblk0p16 179 17 256 mmcblk0p17 179 18 6144 mmcblk0p18 179 19 307200 mmcblk0p19 179 20 4096 mmcblk0p20 179 21 512 mmcblk0p21 179 22 6815744 mmcblk0p22 root@QWRT:~# `
Hey could you please share the board photos and these components on the board?. For NAND flash could you provide the part number.
- NAND flash.
- Memory
- UART Port
If you have the original/stock firmware for the 5866T, could you share it with me?
By looking at the information above, it seems that the device uses eMMC, not a 256 MB NAND flash. Based on the model number 8GTF4R, the eMMC appears to be a Samsung 8 GB eMMC (8GTF4).
I don’t currently own the device, but I plan to purchase it and attempt a firmware dump. However, this may be challenging because the eMMC is a BGA package, which requires advanced soldering skills that I lack.
Can you share this partitions dump?
179 0 7634944 mmcblk0
179 1 512 mmcblk0p1
179 2 256 mmcblk0p2
179 3 256 mmcblk0p3
179 4 1536 mmcblk0p4
179 5 1536 mmcblk0p5
179 6 256 mmcblk0p6
179 7 256 mmcblk0p7
179 8 256 mmcblk0p8
179 9 256 mmcblk0p9
179 10 256 mmcblk0p10
179 11 256 mmcblk0p11
179 12 256 mmcblk0p12
179 13 256 mmcblk0p13
179 14 256 mmcblk0p14
179 15 640 mmcblk0p15
179 16 640 mmcblk0p16
179 17 256 mmcblk0p17
179 18 6144 mmcblk0p18
179 19 307200 mmcblk0p19
179 20 4096 mmcblk0p20
179 21 512 mmcblk0p21
179 22 6815744 mmcblk0p22
Can you share this partitions dump?
179 0 7634944 mmcblk0 179 1 512 mmcblk0p1 179 2 256 mmcblk0p2 179 3 256 mmcblk0p3 179 4 1536 mmcblk0p4 179 5 1536 mmcblk0p5 179 6 256 mmcblk0p6 179 7 256 mmcblk0p7 179 8 256 mmcblk0p8 179 9 256 mmcblk0p9 179 10 256 mmcblk0p10 179 11 256 mmcblk0p11 179 12 256 mmcblk0p12 179 13 256 mmcblk0p13 179 14 256 mmcblk0p14 179 15 640 mmcblk0p15 179 16 640 mmcblk0p16 179 17 256 mmcblk0p17 179 18 6144 mmcblk0p18 179 19 307200 mmcblk0p19 179 20 4096 mmcblk0p20 179 21 512 mmcblk0p21 179 22 6815744 mmcblk0p22
QWRT or stock? I don’t have the stock firmware — if you have it, I can dump it for you.
Is the partition information you have for a QWRT build? If so, could you share the dump for it?
Is the partition information you have for a QWRT build? If so, could you share the dump for it?
Email [email protected]