lede
lede copied to clipboard
Published
20 hours ago •
coolsnowwolf
coolsnowwolf
pcie_mhi模块用不了
源码中的移远pcie_mhi用不了
...
[ 16.000926] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 16.010262] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 16.652163] UBIFS (ubi0:2): Mounting in unauthenticated mode
[ 16.657924] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 784
[ 17.128576] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
[ 17.136402] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 17.146297] UBIFS (ubi0:2): FS size: 27680768 bytes (26 MiB, 218 LEBs), max 228 LEBs, journal size 1396736 bytes (1 MiB, 11 LEBs)
[ 17.157926] UBIFS (ubi0:2): reserved for root: 1307430 bytes (1276 KiB)
[ 17.164524] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 52931B17-F339-4DF1-B562-E22CBC6CB8AC, small LPT model
[ 17.187120] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 17.229573] block: extroot: not configured
[ 17.244860] UBIFS (ubi0:2): un-mount UBI device 0
[ 17.249564] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" stops
[ 17.261960] mount_root: switching to f2fs overlay
[ 17.271913] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 17.283941] urandom-seed: Seeding with /etc/urandom.seed
[ 17.880289] mtdblock: MTD device 'reserved' is NAND, please consider using UBI block devices instead.
[ 18.320907] mtdblock: MTD device 'ubi' is NAND, please consider using UBI block devices instead.
[ 19.044089] mtdblock: MTD device 'bl2' is NAND, please consider using UBI block devices instead.
[ 19.217329] mtdblock: MTD device 'fip' is NAND, please consider using UBI block devices instead.
[ 19.656724] procd: - early -
[ 19.659677] procd: - watchdog -
[ 20.216184] procd: - watchdog -
[ 20.220479] procd: - ubus -
[ 20.282239] procd: - init -
[ 21.006523] urngd: v1.0.2 started.
[ 21.042092] kmodloader: loading kernel modules from /etc/modules.d/*
[ 21.062910] trusted_key: encrypted_key: failed to alloc_cipher (-2)
[ 21.199581] NET: Registered PF_ALG protocol family
[ 21.229326] FS-Cache: Loaded
[ 21.235365] CacheFiles: Loaded
[ 21.239841] Key type dns_resolver registered
[ 21.259558] Key type cifs.idmap registered
[ 21.266938] NET: Registered PF_KEY protocol family
[ 21.273964] Initializing XFRM netlink socket
[ 21.279290] mpls_gso: MPLS GSO support
[ 21.308256] tun: Universal TUN/TAP device driver, 1.6
[ 21.325536] ipip: IPv4 and MPLS over IPv4 tunneling driver
[ 21.341705] l2tp_core: L2TP core driver, V2.0
[ 21.347294] l2tp_netlink: L2TP netlink interface
[ 21.354374] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 21.362406] IPv4 over IPsec tunneling driver
[ 21.371466] nat46: module (version 4c5beee236841724219598fabb1edc93d4f08ce5) loaded.
[ 21.385062] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
[ 21.391159] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 21.399094] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver
[ 21.406889] ixgbevf: Copyright (c) 2009 - 2018 Intel Corporation.
[ 21.414519] gre: GRE over IPv4 demultiplexor driver
[ 21.420917] ip_gre: GRE over IPv4 tunneling driver
[ 21.428710] ip6_gre: GRE over IPv6 tunneling driver
[ 21.441741] ksmbd: The ksmbd server is experimental, use at your own risk.
[ 21.470645] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[ 21.516734] snd-soc-dummy snd-soc-dummy: no of_node; not parsing pinctrl DT
[ 21.529338] i2c-gpio i2c-gpio-0: GPIO lookup for consumer sda
[ 21.535157] i2c-gpio i2c-gpio-0: using device tree for GPIO lookup
[ 21.541338] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-0[0]' - status (0)
[ 21.550735] mt7986a-pinctrl 1001f000.pinctrl: request pin 16 (GPIO_11) for pinctrl_moore:427
[ 21.559168] gpio gpiochip0: Persistence not supported for GPIO 16
[ 21.565259] i2c-gpio i2c-gpio-0: GPIO lookup for consumer scl
[ 21.570987] i2c-gpio i2c-gpio-0: using device tree for GPIO lookup
[ 21.577162] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-0[0]' - status (0)
[ 21.586542] mt7986a-pinctrl 1001f000.pinctrl: request pin 17 (GPIO_12) for pinctrl_moore:428
[ 21.594970] gpio gpiochip0: Persistence not supported for GPIO 17
[ 21.601283] i2c-gpio i2c-gpio-0: using lines 427 (SDA) and 428 (SCL)
[ 21.607913] i2c-gpio i2c-gpio-1: GPIO lookup for consumer sda
[ 21.613660] i2c-gpio i2c-gpio-1: using device tree for GPIO lookup
[ 21.619865] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-1[0]' - status (0)
[ 21.629279] mt7986a-pinctrl 1001f000.pinctrl: request pin 18 (GPIO_13) for pinctrl_moore:429
[ 21.637719] gpio gpiochip0: Persistence not supported for GPIO 18
[ 21.643810] i2c-gpio i2c-gpio-1: GPIO lookup for consumer scl
[ 21.649548] i2c-gpio i2c-gpio-1: using device tree for GPIO lookup
[ 21.655733] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-1[0]' - status (0)
[ 21.665116] mt7986a-pinctrl 1001f000.pinctrl: request pin 19 (GPIO_14) for pinctrl_moore:430
[ 21.673538] gpio gpiochip0: Persistence not supported for GPIO 19
[ 21.679880] i2c-gpio i2c-gpio-1: using lines 429 (SDA) and 430 (SCL)
[ 21.699544] videodev: Linux video capture interface: v2.00
[ 21.713061] GACT probability on
[ 21.717318] Mirror/redirect action on
[ 21.727924] u32 classifier
[ 21.730638] input device check on
[ 21.734285] Actions configured
[ 21.746844] ntfs3: Max link count 4000
[ 21.750599] ntfs3: Enabled Linux POSIX ACLs support
[ 21.759126] fuse: init (API version 7.34)
[ 21.765502] usbcore: registered new interface driver cdc_wdm
[ 21.776090] usbcore: registered new interface driver qmi_wwan_q
[ 21.783925] usbcore: registered new interface driver qmi_wwan_f
[ 21.792739] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,5),PE:150/433(alg:7fcdfc00)/0/0/0
[ 21.812210] NET: Registered PF_IEEE802154 protocol family
[ 21.821145] mhi_init Quectel_Linux_PCIE_MHI_Driver_V1.3.4
[ 21.838327] usbcore: registered new interface driver aqc111
[ 21.846449] usbcore: registered new interface driver asix
[ 21.853603] usbcore: registered new interface driver ax88179_178a
[ 21.861929] Bridge firewalling registered
[ 21.867366] can: controller area network core
[ 21.871820] NET: Registered PF_CAN protocol family
[ 21.879088] CAN device driver interface
[ 21.885190] usbcore: registered new interface driver cdc_acm
[ 21.890857] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 21.900115] usbcore: registered new interface driver cdc_eem
[ 21.907734] usbcore: registered new interface driver cdc_ether
[ 21.915804] usbcore: registered new interface driver cdc_ncm
[ 21.922668] usbcore: registered new interface driver cdc_subset
[ 21.929592] Loading modules backported from Linux version v6.5-0-g2dde18cd1d8f
[ 21.936845] Backport generated by backports.git v5.15.92-1-56-g5fb2ccb6b9e8
[ 21.947647] dahdi: Version: 3.1.0
[ 21.951788] dahdi: Telephony Interface Registered on major 196
[ 21.959919] dahdi_echocan_oslec: Registered echo canceler 'OSLEC'
[ 21.967116] dahdi_hfcs: HFC-S PCI A ISDN (V1.42) loading
[ 21.972439] dahdi_hfcs: Check /var/log/kern-debug.log for debugging output level 0.
[ 21.972443] dahdi_hfcs: base.c is debugging.
[ 21.981741] usbcore: registered new interface driver ems_usb
[ 21.993584] hso: drivers/net/usb/hso.c: Option Wireless
[ 21.998930] usbcore: registered new interface driver hso
[ 22.005473] usbcore: registered new interface driver huawei_cdc_ncm
[ 22.017620] i40e: Intel(R) Ethernet Connection XL710 Network Driver
[ 22.023898] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
[ 22.033027] iavf: Intel(R) Ethernet Adaptive Virtual Function Network Driver
[ 22.040151] Copyright (c) 2013 - 2018 Intel Corporation.
[ 22.048536] Intel(R) 2.5G Ethernet Linux Driver
[ 22.053078] Copyright(c) 2018 Intel Corporation.
[ 22.061151] usbcore: registered new interface driver ipheth
[ 22.073073] usbcore: registered new interface driver kalmia
[ 22.144897] openvswitch: Open vSwitch switching datapath
[ 22.154354] usbcore: registered new interface driver qmi_wwan
[ 22.162323] NET: Registered PF_QIPCRTR protocol family
[ 22.171632] usbcore: registered new interface driver r8152
[ 22.179175] usbcore: registered new interface driver rndis_host
[ 22.186905] usbcore: registered new interface driver rtl8150
[ 22.195495] mdio_bus i2c:sfp-1: GPIO lookup for consumer reset
[ 22.201332] mdio_bus i2c:sfp-1: using lookup tables for GPIO lookup
[ 22.207603] mdio_bus i2c:sfp-1: No GPIO consumer reset found
[ 22.213252] sfp sfp-1: GPIO lookup for consumer mod-def0
[ 22.218552] sfp sfp-1: using device tree for GPIO lookup
[ 22.223869] of_get_named_gpiod_flags: parsed 'mod-def0-gpios' property of node '/sfp-1[0]' - status (0)
[ 22.233271] mt7986a-pinctrl 1001f000.pinctrl: request pin 49 (UART2_RTS) for pinctrl_moore:460
[ 22.241878] gpio gpiochip0: Persistence not supported for GPIO 49
[ 22.248009] sfp sfp-1: GPIO lookup for consumer los
[ 22.252870] sfp sfp-1: using device tree for GPIO lookup
[ 22.258180] of_get_named_gpiod_flags: parsed 'los-gpios' property of node '/sfp-1[0]' - status (0)
[ 22.267128] mt7986a-pinctrl 1001f000.pinctrl: request pin 46 (UART2_RXD) for pinctrl_moore:457
[ 22.275728] gpio gpiochip0: Persistence not supported for GPIO 46
[ 22.281811] sfp sfp-1: GPIO lookup for consumer tx-fault
[ 22.287110] sfp sfp-1: using device tree for GPIO lookup
[ 22.292414] of_get_named_gpiod_flags: parsed 'tx-fault-gpios' property of node '/sfp-1[0]' - status (0)
[ 22.301792] mt7986a-pinctrl 1001f000.pinctrl: request pin 7 (GPIO_2) for pinctrl_moore:418
[ 22.310047] gpio gpiochip0: Persistence not supported for GPIO 7
[ 22.316053] sfp sfp-1: GPIO lookup for consumer tx-disable
[ 22.321521] sfp sfp-1: using device tree for GPIO lookup
[ 22.326838] of_get_named_gpiod_flags: parsed 'tx-disable-gpios' property of node '/sfp-1[0]' - status (0)
[ 22.336399] mt7986a-pinctrl 1001f000.pinctrl: request pin 20 (GPIO_15) for pinctrl_moore:431
[ 22.344828] gpio gpiochip0: Persistence not supported for GPIO 20
[ 22.350902] gpio-431 (tx-disable): no flags found for tx-disable
[ 22.356896] sfp sfp-1: GPIO lookup for consumer rate-select0
[ 22.362538] sfp sfp-1: using device tree for GPIO lookup
[ 22.367839] of_get_named_gpiod_flags: can't parse 'rate-select0-gpios' property of node '/sfp-1[0]'
[ 22.376871] of_get_named_gpiod_flags: can't parse 'rate-select0-gpio' property of node '/sfp-1[0]'
[ 22.385817] sfp sfp-1: using lookup tables for GPIO lookup
[ 22.391285] sfp sfp-1: No GPIO consumer rate-select0 found
[ 22.396759] sfp sfp-1: Host maximum power 3.0W
[ 22.402142] mdio_bus i2c:sfp-2: GPIO lookup for consumer reset
[ 22.408015] mdio_bus i2c:sfp-2: using lookup tables for GPIO lookup
[ 22.414272] mdio_bus i2c:sfp-2: No GPIO consumer reset found
[ 22.419927] sfp sfp-2: GPIO lookup for consumer mod-def0
[ 22.425233] sfp sfp-2: using device tree for GPIO lookup
[ 22.430563] of_get_named_gpiod_flags: parsed 'mod-def0-gpios' property of node '/sfp-2[0]' - status (0)
[ 22.439961] mt7986a-pinctrl 1001f000.pinctrl: request pin 47 (UART2_TXD) for pinctrl_moore:458
[ 22.448570] gpio gpiochip0: Persistence not supported for GPIO 47
[ 22.454665] sfp sfp-2: GPIO lookup for consumer los
[ 22.459530] sfp sfp-2: using device tree for GPIO lookup
[ 22.464847] of_get_named_gpiod_flags: parsed 'los-gpios' property of node '/sfp-2[0]' - status (0)
[ 22.473796] mt7986a-pinctrl 1001f000.pinctrl: request pin 31 (SPI1_MISO) for pinctrl_moore:442
[ 22.482401] gpio gpiochip0: Persistence not supported for GPIO 31
[ 22.488491] sfp sfp-2: GPIO lookup for consumer tx-fault
[ 22.493789] sfp sfp-2: using device tree for GPIO lookup
[ 22.499108] of_get_named_gpiod_flags: parsed 'tx-fault-gpios' property of node '/sfp-2[0]' - status (0)
[ 22.508493] mt7986a-pinctrl 1001f000.pinctrl: request pin 48 (UART2_CTS) for pinctrl_moore:459
[ 22.517097] gpio gpiochip0: Persistence not supported for GPIO 48
[ 22.523183] sfp sfp-2: GPIO lookup for consumer tx-disable
[ 22.528658] sfp sfp-2: using device tree for GPIO lookup
[ 22.533974] of_get_named_gpiod_flags: parsed 'tx-disable-gpios' property of node '/sfp-2[0]' - status (0)
[ 22.543536] mt7986a-pinctrl 1001f000.pinctrl: request pin 15 (GPIO_10) for pinctrl_moore:426
[ 22.551966] gpio gpiochip0: Persistence not supported for GPIO 15
[ 22.558048] gpio-426 (tx-disable): no flags found for tx-disable
[ 22.564042] sfp sfp-2: GPIO lookup for consumer rate-select0
[ 22.569691] sfp sfp-2: using device tree for GPIO lookup
[ 22.575004] of_get_named_gpiod_flags: can't parse 'rate-select0-gpios' property of node '/sfp-2[0]'
[ 22.584038] of_get_named_gpiod_flags: can't parse 'rate-select0-gpio' property of node '/sfp-2[0]'
[ 22.592987] sfp sfp-2: using lookup tables for GPIO lookup
[ 22.598464] sfp sfp-2: No GPIO consumer rate-select0 found
[ 22.603937] sfp sfp-2: Host maximum power 3.0W
[ 22.613010] usbcore: registered new interface driver sierra_net
[ 22.624061] usbcore: registered new interface driver smsc75xx
[ 22.631913] usbcore: registered new interface driver smsc95xx
[ 22.643420] usbcore: registered new interface driver ums-alauda
[ 22.651623] usbcore: registered new interface driver ums-cypress
[ 22.659602] usbcore: registered new interface driver ums-datafab
[ 22.667482] usbcore: registered new interface driver ums-freecom
[ 22.675423] usbcore: registered new interface driver ums-isd200
[ 22.683221] usbcore: registered new interface driver ums-jumpshot
[ 22.691096] usbcore: registered new interface driver ums-karma
[ 22.699267] usbcore: registered new interface driver ums-sddr09
[ 22.707141] usbcore: registered new interface driver ums-sddr55
[ 22.715129] usbcore: registered new interface driver ums-usbat
[ 22.723187] usbcore: registered new interface driver usb_8dev
[ 22.731343] usbcore: registered new interface driver usblp
[ 22.743122] usbcore: registered new interface driver usbserial_generic
[ 22.749765] usbserial: USB Serial support registered for generic
[ 22.757987] v4l2loopback driver version 0.12.7 loaded
[ 22.769005] Driver for 1-wire Dallas network protocol.
[ 22.777736] IPsec XFRM device driver
[ 22.827110] xt_time: kernel timezone is -0000
[ 22.833639] usbcore: registered new interface driver yealink
[ 22.841106] usbcore: registered new interface driver belkin_sa
[ 22.847047] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[ 22.858550] usbcore: registered new interface driver cdc_mbim
[ 22.912705] usbcore: registered new interface driver ch341
[ 22.918292] usbserial: USB Serial support registered for ch341-uart
[ 22.931644] iscsi: registered transport (tcp)
[ 22.945088] Intel(R) Wireless WiFi driver for Linux
[ 23.038689] usbcore: registered new interface driver mt7601u
[ 23.058318] usbcore: registered new interface driver mt7663u
[ 23.079695] usbcore: registered new interface driver mt76x2u
[ 23.089102] generic pinconfig core: found drive-strength with value 4
[ 23.095597] pinctrl core: add 27 pinctrl maps
[ 23.099973] pinctrl core: add 1 pinctrl maps
[ 23.104257] mt7986a-pinctrl 1001f000.pinctrl: found group selector 36 for wf_2g
[ 23.111557] mt7986a-pinctrl 1001f000.pinctrl: found group selector 37 for wf_5g
[ 23.118984] mt7986a-pinctrl 1001f000.pinctrl: found group selector 1 for wifi_led
[ 23.126456] mt7986a-pinctrl 1001f000.pinctrl: request pin 74 (WF0_HB1) for 18000000.wifi
[ 23.134531] mt7986a-pinctrl 1001f000.pinctrl: request pin 75 (WF0_HB2) for 18000000.wifi
[ 23.142600] mt7986a-pinctrl 1001f000.pinctrl: request pin 76 (WF0_HB3) for 18000000.wifi
[ 23.150673] mt7986a-pinctrl 1001f000.pinctrl: request pin 77 (WF0_HB4) for 18000000.wifi
[ 23.158745] mt7986a-pinctrl 1001f000.pinctrl: request pin 78 (WF0_HB0) for 18000000.wifi
[ 23.166818] mt7986a-pinctrl 1001f000.pinctrl: request pin 79 (WF0_HB0_B) for 18000000.wifi
[ 23.175065] mt7986a-pinctrl 1001f000.pinctrl: request pin 80 (WF0_HB5) for 18000000.wifi
[ 23.183134] mt7986a-pinctrl 1001f000.pinctrl: request pin 81 (WF0_HB6) for 18000000.wifi
[ 23.191206] mt7986a-pinctrl 1001f000.pinctrl: request pin 82 (WF0_HB7) for 18000000.wifi
[ 23.199280] mt7986a-pinctrl 1001f000.pinctrl: request pin 83 (WF0_HB8) for 18000000.wifi
[ 23.207353] mt7986a-pinctrl 1001f000.pinctrl: enable function wifi group wf_2g
[ 23.214632] mt7986a-pinctrl 1001f000.pinctrl: request pin 91 (WF1_HB1) for 18000000.wifi
[ 23.222701] mt7986a-pinctrl 1001f000.pinctrl: request pin 92 (WF1_HB2) for 18000000.wifi
[ 23.230774] mt7986a-pinctrl 1001f000.pinctrl: request pin 93 (WF1_HB3) for 18000000.wifi
[ 23.238847] mt7986a-pinctrl 1001f000.pinctrl: request pin 94 (WF1_HB4) for 18000000.wifi
[ 23.246920] mt7986a-pinctrl 1001f000.pinctrl: request pin 95 (WF1_HB0) for 18000000.wifi
[ 23.254993] mt7986a-pinctrl 1001f000.pinctrl: request pin 96 (WF1_HB0_B) for 18000000.wifi
[ 23.263235] mt7986a-pinctrl 1001f000.pinctrl: request pin 97 (WF1_HB5) for 18000000.wifi
[ 23.271308] mt7986a-pinctrl 1001f000.pinctrl: request pin 98 (WF1_HB6) for 18000000.wifi
[ 23.279381] mt7986a-pinctrl 1001f000.pinctrl: request pin 99 (WF1_HB7) for 18000000.wifi
[ 23.287453] mt7986a-pinctrl 1001f000.pinctrl: request pin 100 (WF1_HB8) for 18000000.wifi
[ 23.295614] mt7986a-pinctrl 1001f000.pinctrl: enable function wifi group wf_5g
[ 23.302874] mt7986a-pinctrl 1001f000.pinctrl: request pin 1 (WF2G_LED) for 18000000.wifi
[ 23.310947] mt7986a-pinctrl 1001f000.pinctrl: request pin 2 (WF5G_LED) for 18000000.wifi
[ 23.319020] mt7986a-pinctrl 1001f000.pinctrl: enable function led group wifi_led
[ 23.514447] mt798x-wmac 18000000.wifi: obtain a copy of previously claimed pinctrl
[ 23.794332] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Time: 20221012174743a
[ 23.794332]
[ 23.927471] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Build Time: 20221012174805
[ 24.008886] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Build Time: 20221012174937
[ 26.782017] PPP generic driver version 2.4.2
[ 26.788331] NET: Registered PF_PPPOX protocol family
[ 26.797281] usbcore: registered new interface driver Philips webcam
[ 26.806874] usbcore: registered new interface driver sierra
[ 26.812495] usbserial: USB Serial support registered for Sierra USB modem
[ 26.826805] usbcore: registered new interface driver snd-usb-audio
[ 26.842159] usbcore: registered new interface driver uvcvideo
[ 26.852537] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 26.860380] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
[ 26.874571] batman_adv: B.A.T.M.A.N. advanced 2023.2-openwrt-2 (compatibility version 15) loaded
[ 26.885613] usbcore: registered new interface driver ipw
[ 26.890995] usbserial: USB Serial support registered for IPWireless converter
[ 26.916550] usbcore: registered new interface driver mt76x0u
[ 26.932128] usbcore: registered new interface driver mt7921u
[ 26.939658] usbcore: registered new interface driver option
[ 26.945289] usbserial: USB Serial support registered for GSM modem (1-port)
[ 26.956697] usbcore: registered new interface driver qcserial
[ 26.962481] usbserial: USB Serial support registered for Qualcomm USB modem
[ 26.974827] Key type encrypted registered
[ 26.982420] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 29.956620] EXT4-fs (dm-0): mounting ext2 file system using the ext4 subsystem
[ 29.967638] EXT4-fs (dm-0): warning: mounting unchecked fs, running e2fsck is recommended
[ 30.076844] EXT4-fs (dm-0): mounted filesystem without journal. Opts: . Quota mode: disabled.
[ 36.682443] mtk_soc_eth 15100000.ethernet eth1: configuring for inband/2500base-x link mode
[ 36.693663] mt7530-mdio mdio-bus:1f wan: configuring for phy/gmii link mode
[ 36.703084] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 36.711817] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 36.720466] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 36.729015] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
[ 36.737521] mt7530-mdio mdio-bus:1f sfp2: configuring for inband/2500base-x link mode
[ 37.774801] mtk_soc_eth 15100000.ethernet eth0: Link is Down
[ 37.805967] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
[ 37.814400] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
[ 37.819361] mt7530-mdio mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 37.833052] br-lan: port 1(lan1) entered blocking state
[ 37.838298] br-lan: port 1(lan1) entered disabled state
[ 37.844949] device lan1 entered promiscuous mode
[ 37.849562] device eth0 entered promiscuous mode
[ 37.856408] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 37.878646] mt7530-mdio mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 37.888847] br-lan: port 2(lan2) entered blocking state
[ 37.894086] br-lan: port 2(lan2) entered disabled state
[ 37.901165] device lan2 entered promiscuous mode
[ 37.915666] mt7530-mdio mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 37.925934] br-lan: port 3(lan3) entered blocking state
[ 37.931167] br-lan: port 3(lan3) entered disabled state
[ 37.938765] device lan3 entered promiscuous mode
[ 37.954002] mt7530-mdio mdio-bus:1f lan4: configuring for phy/gmii link mode
[ 37.964188] br-lan: port 4(lan4) entered blocking state
[ 37.969488] br-lan: port 4(lan4) entered disabled state
[ 37.977734] device lan4 entered promiscuous mode
[ 37.990090] mt7530-mdio mdio-bus:1f sfp2: configuring for inband/2500base-x link mode
[ 38.000410] br-lan: port 5(sfp2) entered blocking state
[ 38.005793] br-lan: port 5(sfp2) entered disabled state
[ 38.013603] device sfp2 entered promiscuous mode
[ 38.023845] mtk_soc_eth 15100000.ethernet eth1: configuring for inband/2500base-x link mode
[ 38.033230] br-wan: port 1(eth1) entered blocking state
[ 38.038538] br-wan: port 1(eth1) entered disabled state
[ 38.044141] device eth1 entered promiscuous mode
[ 38.058209] mt7530-mdio mdio-bus:1f wan: configuring for phy/gmii link mode
[ 38.068282] br-wan: port 2(wan) entered blocking state
[ 38.073485] br-wan: port 2(wan) entered disabled state
[ 38.080642] device wan entered promiscuous mode
[ 45.326308] mt7530-mdio mdio-bus:1f lan2: Link is Up - 1Gbps/Full - flow control rx/tx
[ 45.334276] br-lan: port 2(lan2) entered blocking state
[ 45.339560] br-lan: port 2(lan2) entered forwarding state
[ 45.347441] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
lspci无返回值
root@ChaingTsung:~# lspci
root@ChaingTsung:~# lsmod |grep mhi
mhi_wwan_mbim 20480 0
mhi_wwan_ctrl 20480 0
wwan 24576 2 mhi_wwan_mbim,mhi_wwan_ctrl
qrtr_mhi 20480 0
qrtr 40960 5 qrtr_mhi
mhi_net 16384 0
mhi 81920 4 mhi_wwan_mbim,mhi_wwan_ctrl,mhi_net,qrtr_mhi
pcie_mhi 176128 0
root@ChaingTsung:~#
dmesg中又能找到
root@ChaingTsung:~# dmesg |grep mhi
[ 21.821145] mhi_init Quectel_Linux_PCIE_MHI_Driver_V1.3.4
ls /dev 没有相关dev设备
root@ChaingTsung:~# ls /dev |grep mhi_*
root@ChaingTsung:~#
