lede
lede copied to clipboard
coolsnowwolf
关于在活动连接、客户端多的时候，软中断变多，且CPU占用会变高，网速变慢的问题
反馈bug/问题模板，提建议请删除
1.关于你要提交的问题
Q：是否搜索了issue (使用 "x" 选择)
- [] 没有类似的issue
2. 详细叙述
(1) 具体问题
A：关于在活动连接、客户端多的时候，软中断变多，且CPU占用会变高，网速变慢的问题
目前连接数在5000左右，客户端在65左右，使用top命令查看占用情况，会发现ksoftirqd占用在大量使用网速时会变高。随着开机时间推移，ksoftirqd占用CPU会越来越高，导致网速变慢。
不知道是什么在影响，是不是一些软件的原因？
这个是开机3小时的截图
(2) 路由器型号和固件版本
A： 版本 OpenWrt R23.4.1 / LuCI Master (git-23.096.61004-062aba3)，2023.04.11拉取的master分支编译的。 CPU i5 6500 内存 16GB 网卡 wan RTL8125B 2.5G in 1G lan CX341a 10G + 板载网卡也是螃蟹卡1G速度 实体机安装的Openwrt
(3) 详细日志
cat /proc/softirqs
[ 0.000000] Linux version 5.15.105 (flision@flision-Virtual-Machine) (x86_64-openwrt-linux-musl-gcc (OpenWrt GCC 11.3.0 r5877-c1a7461e8) 11.3.0, GNU ld (GNU Binutils) 2.37) #0 SMP Mon Apr 10 15:15:22 2023
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=d4f6499d-a887-1667-9646-257b28325f02 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] signal: max sigframe size: 1616
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b4c0efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b4c0f000-0x00000000b4c0ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b4c10000-0x00000000b4c10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b4c11000-0x00000000b9aeafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9aeb000-0x00000000b9e32fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9e33000-0x00000000b9fa0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9fa1000-0x00000000ba64ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ba650000-0x00000000baea3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baea4000-0x00000000baefefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000baeff000-0x00000000baefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baf00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xba2a1000 ACPI=0xba2a1000 SMBIOS=0xbadcf000 SMBIOS 3.0=0xbadce000 ESRT=0xb8886718
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. B150N Phoenix-WIFI/B150N Phoenix-WIFI-CF, BIOS F22e 03/09/2018
[ 0.000000] tsc: Detected 3200.000 MHz processor
[ 0.000000] tsc: Detected 3199.980 MHz TSC
[ 0.000307] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000309] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000315] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[ 0.000383] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001075] last_pfn = 0xbaf00 max_arch_pfn = 0x400000000
[ 0.006365] found SMP MP-table at [mem 0x000fcc90-0x000fcc9f]
[ 0.006371] esrt: Reserving ESRT space from 0x00000000b8886718 to 0x00000000b8886750.
[ 0.006375] e820: update [mem 0xb8886000-0xb8886fff] usable ==> reserved
[ 0.006385] Using GB pages for direct mapping
[ 0.006864] Secure boot disabled
[ 0.006865] ACPI: Early table checksum verification disabled
[ 0.006867] ACPI: RSDP 0x00000000BA2A1000 000024 (v02 ALASKA)
[ 0.006870] ACPI: XSDT 0x00000000BA2A10A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006874] ACPI: FACP 0x00000000BA2C92B8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.006877] ACPI: DSDT 0x00000000BA2A1208 0280AA (v02 ALASKA A M I 01072009 INTL 20160422)
[ 0.006880] ACPI: FACS 0x00000000BA64FC40 000040
[ 0.006881] ACPI: APIC 0x00000000BA2C93D0 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.006883] ACPI: FPDT 0x00000000BA2C9458 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006885] ACPI: MCFG 0x00000000BA2C94A0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.006887] ACPI: FIDT 0x00000000BA2C94E0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006889] ACPI: SSDT 0x00000000BA2C9580 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.006892] ACPI: SSDT 0x00000000BA2CC6D8 002544 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 0.006894] ACPI: HPET 0x00000000BA2CEC20 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
[ 0.006896] ACPI: SSDT 0x00000000BA2CEC58 000E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
[ 0.006898] ACPI: SSDT 0x00000000BA2CFA98 002AD7 (v02 INTEL xh_rvp10 00000000 INTL 20160422)
[ 0.006900] ACPI: UEFI 0x00000000BA2D2570 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.006902] ACPI: SSDT 0x00000000BA2D25B8 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.006904] ACPI: LPIT 0x00000000BA2D3498 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.006906] ACPI: WSMT 0x00000000BA2D3530 000028 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.006908] ACPI: SSDT 0x00000000BA2D3558 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.006910] ACPI: SSDT 0x00000000BA2D37F8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.006912] ACPI: DBGP 0x00000000BA2D6800 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.006913] ACPI: DBG2 0x00000000BA2D6838 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.006915] ACPI: BGRT 0x00000000BA2D6890 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006918] ACPI: DMAR 0x00000000BA2D68C8 0000A8 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.006920] ACPI: BGRT 0x00000000BA2D6970 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.006921] ACPI: Reserving FACP table memory at [mem 0xba2c92b8-0xba2c93cb]
[ 0.006923] ACPI: Reserving DSDT table memory at [mem 0xba2a1208-0xba2c92b1]
[ 0.006924] ACPI: Reserving FACS table memory at [mem 0xba64fc40-0xba64fc7f]
[ 0.006924] ACPI: Reserving APIC table memory at [mem 0xba2c93d0-0xba2c9453]
[ 0.006925] ACPI: Reserving FPDT table memory at [mem 0xba2c9458-0xba2c949b]
[ 0.006926] ACPI: Reserving MCFG table memory at [mem 0xba2c94a0-0xba2c94db]
[ 0.006927] ACPI: Reserving FIDT table memory at [mem 0xba2c94e0-0xba2c957b]
[ 0.006928] ACPI: Reserving SSDT table memory at [mem 0xba2c9580-0xba2cc6d3]
[ 0.006928] ACPI: Reserving SSDT table memory at [mem 0xba2cc6d8-0xba2cec1b]
[ 0.006929] ACPI: Reserving HPET table memory at [mem 0xba2cec20-0xba2cec57]
[ 0.006930] ACPI: Reserving SSDT table memory at [mem 0xba2cec58-0xba2cfa92]
[ 0.006931] ACPI: Reserving SSDT table memory at [mem 0xba2cfa98-0xba2d256e]
[ 0.006932] ACPI: Reserving UEFI table memory at [mem 0xba2d2570-0xba2d25b1]
[ 0.006933] ACPI: Reserving SSDT table memory at [mem 0xba2d25b8-0xba2d3495]
[ 0.006933] ACPI: Reserving LPIT table memory at [mem 0xba2d3498-0xba2d352b]
[ 0.006934] ACPI: Reserving WSMT table memory at [mem 0xba2d3530-0xba2d3557]
[ 0.006935] ACPI: Reserving SSDT table memory at [mem 0xba2d3558-0xba2d37f6]
[ 0.006936] ACPI: Reserving SSDT table memory at [mem 0xba2d37f8-0xba2d67f9]
[ 0.006937] ACPI: Reserving DBGP table memory at [mem 0xba2d6800-0xba2d6833]
[ 0.006937] ACPI: Reserving DBG2 table memory at [mem 0xba2d6838-0xba2d688b]
[ 0.006938] ACPI: Reserving BGRT table memory at [mem 0xba2d6890-0xba2d68c7]
[ 0.006939] ACPI: Reserving DMAR table memory at [mem 0xba2d68c8-0xba2d696f]
[ 0.006940] ACPI: Reserving BGRT table memory at [mem 0xba2d6970-0xba2d69a7]
[ 0.006957] Zone ranges:
[ 0.006958] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.006960] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.006961] Normal [mem 0x0000000100000000-0x000000043effffff]
[ 0.006962] Movable zone start for each node
[ 0.006963] Early memory node ranges
[ 0.006963] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.006964] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.006965] node 0: [mem 0x0000000000100000-0x00000000b4c0efff]
[ 0.006966] node 0: [mem 0x00000000b4c11000-0x00000000b9aeafff]
[ 0.006966] node 0: [mem 0x00000000b9e33000-0x00000000b9fa0fff]
[ 0.006967] node 0: [mem 0x00000000baeff000-0x00000000baefffff]
[ 0.006968] node 0: [mem 0x0000000100000000-0x000000043effffff]
[ 0.006969] Initmem setup node 0 [mem 0x0000000000001000-0x000000043effffff]
[ 0.006971] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.006973] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.006992] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.010861] On node 0, zone DMA32: 2 pages in unavailable ranges
[ 0.010872] On node 0, zone DMA32: 840 pages in unavailable ranges
[ 0.010900] On node 0, zone DMA32: 3934 pages in unavailable ranges
[ 0.028617] On node 0, zone Normal: 20736 pages in unavailable ranges
[ 0.028651] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.028738] Reserving Intel graphics memory at [mem 0xbc000000-0xbfffffff]
[ 0.028893] ACPI: PM-Timer IO Port: 0x1808
[ 0.028897] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.028899] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.028900] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.028900] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.028925] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.028927] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.028929] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.028931] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.028932] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.028934] TSC deadline timer available
[ 0.028935] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.028946] [mem 0xc0000000-0xefffffff] available for PCI devices
[ 0.028947] Booting paravirtualized kernel on bare hardware
[ 0.028949] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.028952] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.029042] percpu: Embedded 44 pages/cpu s143064 r8192 d28968 u524288
[ 0.029046] pcpu-alloc: s143064 r8192 d28968 u524288 alloc=12097152
[ 0.029048] pcpu-alloc: [0] 0 1 2 3
[ 0.029060] Built 1 zonelists, mobility grouping on. Total pages: 4099366
[ 0.029061] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=d4f6499d-a887-1667-9646-257b28325f02 rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.029095] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz", will be passed to user space.
[ 0.029766] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.030051] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.030084] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.063108] Memory: 16199944K/16658388K available (14337K kernel code, 1115K rwdata, 3368K rodata, 1304K init, 1556K bss, 458188K reserved, 0K cma-reserved)
[ 0.063139] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.063143] Kernel/User page tables isolation: enabled
[ 0.063175] rcu: Hierarchical RCU implementation.
[ 0.063176] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.063177] Tracing variant of Tasks RCU enabled.
[ 0.063178] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.063179] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.063194] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16
[ 0.063518] Console: colour dummy device 80x25
[ 0.063657] printk: console [tty0] enabled
[ 0.151274] printk: console [ttyS0] enabled
[ 0.151626] ACPI: Core revision 20210730
[ 0.152142] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.152960] APIC: Switch to symmetric I/O mode setup
[ 0.154586] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.159358] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.176857] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e2036ff8d5, max_idle_ns: 440795275316 ns
[ 0.177713] Calibrating delay loop (skipped), value calculated using timer frequency.. 6399.96 BogoMIPS (lpj=12799920)
[ 0.178583] pid_max: default: 32768 minimum: 301
[ 0.181787] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.182427] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.183207] CPU0: Thermal monitoring enabled (TM1)
[ 0.183627] process: using mwait in idle threads
[ 0.184009] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.184461] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.184955] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.185715] Spectre V2 : Mitigation: IBRS
[ 0.186049] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.186724] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[ 0.187273] RETBleed: Mitigation: IBRS
[ 0.187586] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.188274] Speculative Store Bypass: Vulnerable
[ 0.188657] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.189193] TAA: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.189714] MMIO Stale Data: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.190333] SRBDS: Vulnerable: No microcode
[ 0.198232] Freeing SMP alternatives memory: 44K
[ 0.198905] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1056
[ 0.199657] smpboot: CPU0: Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.200540] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.201368] ... version: 4
[ 0.201702] ... bit width: 48
[ 0.201713] ... generic registers: 8
[ 0.201713] ... value mask: 0000ffffffffffff
[ 0.201713] ... max period: 00007fffffffffff
[ 0.201713] ... fixed-purpose events: 3
[ 0.201713] ... event mask: 00000007000000ff
[ 0.201792] rcu: Hierarchical SRCU implementation.
[ 0.202207] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[ 0.202863] smp: Bringing up secondary CPUs ...
[ 0.203285] x86: Booting SMP configuration:
[ 0.203633] .... node #0, CPUs: #1 #2 #3
[ 0.204922] smp: Brought up 1 node, 4 CPUs
[ 0.205634] smpboot: Max logical packages: 1
[ 0.205716] smpboot: Total of 4 processors activated (25599.84 BogoMIPS)
[ 0.207243] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.208038] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.208619] pinctrl core: initialized pinctrl subsystem
[ 0.209207] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.209819] thermal_sys: Registered thermal governor 'step_wise'
[ 0.209820] thermal_sys: Registered thermal governor 'user_space'
[ 0.210338] cpuidle: using governor ladder
[ 0.210334] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.210334] ACPI: bus type PCI registered
[ 0.210334] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.210606] PCI: Using configuration type 1 for base access
[ 0.214768] cryptd: max_cpu_qlen set to 1000
[ 0.215265] ACPI: Added _OSI(Module Device)
[ 0.215613] ACPI: Added _OSI(Processor Device)
[ 0.215982] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.216372] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.216817] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.217186] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.217624] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.242657] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.245047] ACPI: [Firmware Bug]: BIOS OSI(Linux) query ignored
[ 0.248013] ACPI: Dynamic OEM Table Load:
[ 0.248352] ACPI: SSDT 0xFFFF88810027A000 0006D5 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.249970] ACPI: _PR.CPU0: _OSC native thermal LVT Acked
[ 0.251349] ACPI: Dynamic OEM Table Load:
[ 0.251687] ACPI: SSDT 0xFFFF8881001C4800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.253442] ACPI: Dynamic OEM Table Load:
[ 0.253717] ACPI: SSDT 0xFFFF88810027B000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.255488] ACPI: Dynamic OEM Table Load:
[ 0.255825] ACPI: SSDT 0xFFFF8881000F0400 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.258953] ACPI: Interpreter enabled
[ 0.259264] ACPI: PM: (supports S0 S5)
[ 0.259577] ACPI: Using IOAPIC for interrupt routing
[ 0.260011] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.261409] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.263340] ACPI: PM: Power Resource [PG00]
[ 0.263952] ACPI: PM: Power Resource [PG01]
[ 0.264555] ACPI: PM: Power Resource [PG02]
[ 0.266242] ACPI: PM: Power Resource [WRST]
[ 0.266772] ACPI: PM: Power Resource [WRST]
[ 0.267304] ACPI: PM: Power Resource [WRST]
[ 0.267835] ACPI: PM: Power Resource [WRST]
[ 0.268365] ACPI: PM: Power Resource [WRST]
[ 0.268898] ACPI: PM: Power Resource [WRST]
[ 0.269430] ACPI: PM: Power Resource [WRST]
[ 0.269898] ACPI: PM: Power Resource [WRST]
[ 0.270428] ACPI: PM: Power Resource [WRST]
[ 0.270955] ACPI: PM: Power Resource [WRST]
[ 0.271485] ACPI: PM: Power Resource [WRST]
[ 0.272014] ACPI: PM: Power Resource [WRST]
[ 0.272542] ACPI: PM: Power Resource [WRST]
[ 0.273069] ACPI: PM: Power Resource [WRST]
[ 0.273597] ACPI: PM: Power Resource [WRST]
[ 0.273894] ACPI: PM: Power Resource [WRST]
[ 0.274422] ACPI: PM: Power Resource [WRST]
[ 0.275594] ACPI: PM: Power Resource [WRST]
[ 0.276121] ACPI: PM: Power Resource [WRST]
[ 0.276649] ACPI: PM: Power Resource [WRST]
[ 0.284155] ACPI: PM: Power Resource [FN00]
[ 0.284559] ACPI: PM: Power Resource [FN01]
[ 0.284959] ACPI: PM: Power Resource [FN02]
[ 0.285358] ACPI: PM: Power Resource [FN03]
[ 0.285758] ACPI: PM: Power Resource [FN04]
[ 0.286996] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.287508] acpi PNP0A08:00: _OSC: OS supports [Segments MSI HPX-Type3]
[ 0.288077] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[ 0.289197] PCI host bridge to bus 0000:00
[ 0.289538] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.289714] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.290271] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.290884] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff window]
[ 0.291497] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.292110] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.292650] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.293347] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.293744] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.294535] pci 0000:00:02.0: [8086:1912] type 00 class 0x030000
[ 0.295036] pci 0000:00:02.0: reg 0x10: [mem 0xee000000-0xeeffffff 64bit]
[ 0.295596] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.296191] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.296660] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.297086] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.297945] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.298456] pci 0000:00:14.0: reg 0x10: [mem 0xef430000-0xef43ffff 64bit]
[ 0.299070] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.300010] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.300522] pci 0000:00:16.0: reg 0x10: [mem 0xef44d000-0xef44dfff 64bit]
[ 0.301140] pci 0000:00:16.0: PME# supported from D3hot
[ 0.301825] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.302329] pci 0000:00:17.0: reg 0x10: [mem 0xef448000-0xef449fff]
[ 0.302849] pci 0000:00:17.0: reg 0x14: [mem 0xef44c000-0xef44c0ff]
[ 0.303369] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097]
[ 0.303833] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083]
[ 0.304297] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.304760] pci 0000:00:17.0: reg 0x24: [mem 0xef44b000-0xef44b7ff]
[ 0.305306] pci 0000:00:17.0: PME# supported from D3hot
[ 0.305948] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[ 0.306492] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.307385] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
[ 0.307929] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.308800] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
[ 0.309344] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.310089] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.310642] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.311541] pci 0000:00:1f.0: [8086:a148] type 00 class 0x060100
[ 0.312341] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.312848] pci 0000:00:1f.2: reg 0x10: [mem 0xef444000-0xef447fff]
[ 0.313617] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.313733] pci 0000:00:1f.3: reg 0x10: [mem 0xef440000-0xef443fff 64bit]
[ 0.314317] pci 0000:00:1f.3: reg 0x20: [mem 0xef420000-0xef42ffff 64bit]
[ 0.314915] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.315802] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.316351] pci 0000:00:1f.4: reg 0x10: [mem 0xef44a000-0xef44a0ff 64bit]
[ 0.316975] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f]
[ 0.317723] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[ 0.318235] pci 0000:00:1f.6: reg 0x10: [mem 0xef400000-0xef41ffff]
[ 0.318850] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.319731] pci 0000:01:00.0: [15b3:1003] type 00 class 0x020000
[ 0.320587] pci 0000:01:00.0: reg 0x10: [mem 0xef100000-0xef1fffff 64bit]
[ 0.321381] pci 0000:01:00.0: reg 0x18: [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.322159] pci 0000:01:00.0: reg 0x30: [mem 0xef000000-0xef0fffff pref]
[ 0.323592] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 0.324970] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.325382] pci 0000:00:01.0: bridge window [mem 0xef000000-0xef1fffff]
[ 0.325716] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.326424] pci 0000:02:00.0: [1b21:1242] type 00 class 0x0c0330
[ 0.326938] pci 0000:02:00.0: reg 0x10: [mem 0xef300000-0xef307fff 64bit]
[ 0.327542] pci 0000:02:00.0: enabling Extended Tags
[ 0.327998] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.328663] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.329076] pci 0000:00:1c.0: bridge window [mem 0xef300000-0xef3fffff]
[ 0.329707] pci 0000:03:00.0: [10ec:8125] type 00 class 0x020000
[ 0.329727] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.330204] pci 0000:03:00.0: reg 0x18: [mem 0xef200000-0xef20ffff 64bit]
[ 0.330771] pci 0000:03:00.0: reg 0x20: [mem 0xef210000-0xef213fff 64bit]
[ 0.331386] pci 0000:03:00.0: supports D1 D2
[ 0.331741] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.332469] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.332882] pci 0000:00:1c.6: bridge window [io 0xe000-0xefff]
[ 0.333383] pci 0000:00:1c.6: bridge window [mem 0xef200000-0xef2fffff]
[ 0.333773] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.334256] pci 0000:00:1d.0: PCI bridge to [bus 05]
[ 0.334691] pci_bus 0000:00: on NUMA node 0
[ 0.335967] ACPI: PCI: Interrupt link LNKA configured for IRQ 11
[ 0.336499] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[ 0.337029] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[ 0.337559] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[ 0.337753] ACPI: PCI: Interrupt link LNKE configured for IRQ 11
[ 0.338283] ACPI: PCI: Interrupt link LNKF configured for IRQ 11
[ 0.338813] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[ 0.339345] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[ 0.344429] SCSI subsystem initialized
[ 0.344765] libata version 3.00 loaded.
[ 0.344768] ACPI: bus type USB registered
[ 0.345109] usbcore: registered new interface driver usbfs
[ 0.345564] usbcore: registered new interface driver hub
[ 0.345719] usbcore: registered new device driver usb
[ 0.346145] pps_core: LinuxPPS API ver. 1 registered
[ 0.346555] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [email protected]
[ 0.347299] PTP clock support registered
[ 0.347653] Registered efivars operations
[ 0.348111] PCI: Using ACPI for IRQ routing
[ 0.348459] PCI: pci_cache_line_size set to 64 bytes
[ 0.348540] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.348542] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.348543] e820: reserve RAM buffer [mem 0xb4c0f000-0xb7ffffff]
[ 0.348544] e820: reserve RAM buffer [mem 0xb8886000-0xbbffffff]
[ 0.348545] e820: reserve RAM buffer [mem 0xb9aeb000-0xbbffffff]
[ 0.348546] e820: reserve RAM buffer [mem 0xb9fa1000-0xbbffffff]
[ 0.348547] e820: reserve RAM buffer [mem 0xbaf00000-0xbbffffff]
[ 0.348548] e820: reserve RAM buffer [mem 0x43f000000-0x43fffffff]
[ 0.348604] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.349116] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.350743] clocksource: Switched to clocksource tsc-early
[ 0.351236] pnp: PnP ACPI init
[ 0.351662] system 00:00: [io 0x0a00-0x0a2f] has been reserved
[ 0.352151] system 00:00: [io 0x0a30-0x0a3f] has been reserved
[ 0.352639] system 00:00: [io 0x0a40-0x0a4f] has been reserved
[ 0.353257] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.353257] system 00:01: [io 0xffff] has been reserved
[ 0.353257] system 00:01: [io 0xffff] has been reserved
[ 0.353604] system 00:01: [io 0xffff] has been reserved
[ 0.354045] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.354533] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.355078] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.355603] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.356240] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.356783] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.357328] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.357873] system 00:05: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.358417] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.358962] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.359505] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.360048] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.360592] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.361163] system 00:05: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.361736] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.362280] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.362823] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.363366] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.363937] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.364480] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.365023] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.365758] system 00:07: [io 0xff00-0xfffe] has been reserved
[ 0.367013] system 00:08: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.367557] system 00:08: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.368100] system 00:08: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.369214] pnp: PnP ACPI: found 9 devices
[ 0.374459] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.375202] NET: Registered PF_INET protocol family
[ 0.375720] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.377739] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.378453] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.379089] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.379837] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.380520] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.381076] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.381654] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.382291] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.382765] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.383177] pci 0000:00:01.0: bridge window [mem 0xef000000-0xef1fffff]
[ 0.383735] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.384371] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.384783] pci 0000:00:1c.0: bridge window [mem 0xef300000-0xef3fffff]
[ 0.385343] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.385756] pci 0000:00:1c.6: bridge window [io 0xe000-0xefff]
[ 0.386259] pci 0000:00:1c.6: bridge window [mem 0xef200000-0xef2fffff]
[ 0.386819] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.387235] pci 0000:00:1d.0: PCI bridge to [bus 05]
[ 0.387653] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.388163] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.388671] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.389235] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xefffffff window]
[ 0.389799] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.390363] pci_bus 0000:01: resource 1 [mem 0xef000000-0xef1fffff]
[ 0.390878] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.391470] pci_bus 0000:02: resource 1 [mem 0xef300000-0xef3fffff]
[ 0.391985] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.392444] pci_bus 0000:03: resource 1 [mem 0xef200000-0xef2fffff]
[ 0.393528] PCI: CLS 64 bytes, default 64
[ 0.393872] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.394400] software IO TLB: mapped [mem 0x00000000af6fb000-0x00000000b36fb000] (64MB)
[ 0.395100] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 0.395748] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.396220] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.396687] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.397132] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.398060] workingset: timestamp_bits=46 max_order=22 bucket_order=0
[ 0.399318] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.399900] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.401072] hv_vmbus: registering driver hyperv_fb
[ 0.401687] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.402391] ACPI: button: Sleep Button [SLPB]
[ 0.402774] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.403477] ACPI: button: Power Button [PWRB]
[ 0.403893] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.404543] ACPI: button: Power Button [PWRF]
[ 0.405569] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.406075] ACPI: thermal: Thermal Zone [TZ00] (28 C)
[ 0.406651] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.407152] ACPI: thermal: Thermal Zone [TZ01] (30 C)
[ 0.407655] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.408572] Non-volatile memory driver v1.3
[ 0.408980] Linux agpgart interface v0.103
[ 0.409450] i915 0000:00:02.0: [drm] Incompatible option enable_guc=3 - GuC submission is N/A
[ 0.411845] i915 0000:00:02.0: Direct firmware load for i915/skl_dmc_ver1_27.bin failed with error -2
[ 0.412683] i915 0000:00:02.0: Direct firmware load for i915/skl_guc_62.0.0.bin failed with error -2
[ 0.412750] i915 0000:00:02.0: Falling back to sysfs fallback for: i915/skl_dmc_ver1_27.bin
[ 0.413495] i915 0000:00:02.0: Falling back to sysfs fallback for: i915/skl_guc_62.0.0.bin
[ 1.397999] tsc: Refined TSC clocksource calibration: 3191.999 MHz
[ 1.398536] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c398820, max_idle_ns: 440795273435 ns
[ 1.399438] clocksource: Switched to clocksource tsc
[ 60.534048] i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/skl_dmc_ver1_27.bin. Disabling runtime power management.
[ 60.534048] i915 0000:00:02.0: [drm] GuC firmware i915/skl_guc_62.0.0.bin: fetch failed with error -110
[ 60.534051] i915 0000:00:02.0: [drm] GuC firmware(s) can be downloaded from https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[ 60.535014] i915 0000:00:02.0: [drm] DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[ 60.536660] i915 0000:00:02.0: [drm] GuC is uninitialized
[ 60.540005] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 60.541938] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 60.542748] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 60.544805] loop: module loaded
[ 60.545575] Guest personality initialized and is inactive
[ 60.546799] VMCI host device registered (name=vmci, major=10, minor=127)
[ 60.548166] Initialized host personality
[ 60.549036] VMware PVSCSI driver - version 1.0.7.0-k
[ 60.550192] hv_vmbus: registering driver hv_storvsc
[ 60.551863] ahci 0000:00:17.0: version 3.0
[ 60.553015] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[ 60.561064] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[ 60.562268] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 60.564028] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ 60.569672] i915 0000:00:02.0: [drm] Cannot find any crtc or sizes
[ 60.626394] scsi host0: ahci
[ 60.626935] scsi host1: ahci
[ 60.627612] scsi host2: ahci
[ 60.628118] scsi host3: ahci
[ 60.628675] scsi host4: ahci
[ 60.629341] scsi host5: ahci
[ 60.629690] ata1: SATA max UDMA/133 abar m2048@0xef44b000 port 0xef44b100 irq 126
[ 60.630354] ata2: SATA max UDMA/133 abar m2048@0xef44b000 port 0xef44b180 irq 126
[ 60.630969] ata3: SATA max UDMA/133 abar m2048@0xef44b000 port 0xef44b200 irq 126
[ 60.631583] ata4: SATA max UDMA/133 abar m2048@0xef44b000 port 0xef44b280 irq 126
[ 60.632197] ata5: SATA max UDMA/133 abar m2048@0xef44b000 port 0xef44b300 irq 126
[ 60.632810] ata6: SATA max UDMA/133 abar m2048@0xef44b000 port 0xef44b380 irq 126
[ 60.633593] VMware vmxnet3 virtual NIC driver - version 1.6.0.0-k-NAPI
[ 60.634149] hv_vmbus: registering driver hv_netvsc
[ 60.634620] Fusion MPT base driver 3.04.20
[ 60.634983] Copyright (c) 1999-2008 LSI Corporation
[ 60.635388] Fusion MPT SPI Host driver 3.04.20
[ 60.635763] Fusion MPT SAS Host driver 3.04.20
[ 60.636188] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 60.636772] ehci-pci: EHCI PCI platform driver
[ 60.637146] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 60.637704] ohci-pci: OHCI PCI platform driver
[ 60.638118] uhci_hcd: USB Universal Host Controller Interface driver
[ 60.638844] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 60.639280] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 60.640943] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000001109810
[ 60.641974] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 60.642431] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 60.643039] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 60.643628] hub 1-0:1.0: USB hub found
[ 60.644000] hub 1-0:1.0: 12 ports detected
[ 60.645276] hub 2-0:1.0: USB hub found
[ 60.645615] hub 2-0:1.0: 6 ports detected
[ 60.646569] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 60.647026] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 60.706378] xhci_hcd 0000:02:00.0: hcc params 0x0200eec0 hci version 0x110 quirks 0x0000000000800010
[ 60.707284] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 60.707753] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 60.708360] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 60.709417] hub 3-0:1.0: USB hub found
[ 60.709897] hub 3-0:1.0: 2 ports detected
[ 60.710689] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 60.711849] hub 4-0:1.0: USB hub found
[ 60.712241] hub 4-0:1.0: 2 ports detected
[ 60.712886] usbcore: registered new interface driver usb-storage
[ 60.713479] i8042: PNP: No PS/2 controller found.
[ 60.713945] hv_vmbus: registering driver hyperv_keyboard
[ 60.714397] rtc_cmos 00:03: RTC can wake from S4
[ 60.715516] rtc_cmos 00:03: registered as rtc0
[ 60.716042] rtc_cmos 00:03: setting system clock to 2023-04-12T05:21:43 UTC (1681276903)
[ 60.716713] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram
[ 60.717981] intel_pstate: Intel P-state driver initializing
[ 60.718683] intel_pstate: HWP enabled
[ 60.719015] sdhci: Secure Digital Host Controller Interface driver
[ 60.719593] sdhci: Copyright(c) Pierre Ossman
[ 60.720194] hid: raw HID events driver (C) Jiri Kosina
[ 60.720658] hv_vmbus: registering driver hid_hyperv
[ 60.721069] usbcore: registered new interface driver usbhid
[ 60.721529] usbhid: USB HID core driver
[ 60.721891] hv_utils: Registering HyperV Utility Driver
[ 60.722324] hv_vmbus: registering driver hv_utils
[ 60.722714] hv_vmbus: registering driver hv_balloon
[ 60.723208] NET: Registered PF_INET6 protocol family
[ 60.724041] Segment Routing with IPv6
[ 60.724355] In-situ OAM (IOAM) with IPv6
[ 60.724696] NET: Registered PF_PACKET protocol family
[ 60.725120] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 60.726203] 8021q: 802.1Q VLAN Support v1.8
[ 60.726572] NET: Registered PF_VSOCK protocol family
[ 60.727421] microcode: sig=0x506e3, pf=0x2, revision=0xc2
[ 60.727953] microcode: Microcode Update Driver: v2.2.
[ 60.727956] IPI shorthand broadcast: enabled
[ 60.728732] AVX2 version of gcm_enc/dec engaged.
[ 60.729271] AES CTR mode by8 optimization enabled
[ 60.731603] sched_clock: Marking stable (60641365792, 90214433)->(60738966616, -7386391)
[ 60.946805] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 60.947353] ata2: SATA link down (SStatus 4 SControl 300)
[ 60.947837] ata4: SATA link down (SStatus 4 SControl 300)
[ 60.948319] ata5: SATA link down (SStatus 4 SControl 300)
[ 60.948801] ata3: SATA link down (SStatus 4 SControl 300)
[ 60.949274] ata6: SATA link down (SStatus 4 SControl 300)
[ 60.949853] ata1.00: supports DRM functions and may not be fully accessible
[ 60.950440] ata1.00: ATA-9: Samsung SSD 850 EVO M.2 120GB, EMT21B6Q, max UDMA/133
[ 60.951913] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 60.953726] ata1.00: Features: Trust Dev-Sleep NCQ-sndrcv
[ 60.954475] ata1.00: supports DRM functions and may not be fully accessible
[ 60.957353] ata1.00: configured for UDMA/133
[ 60.958054] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 1B6Q PQ: 0 ANSI: 5
[ 60.959610] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 60.960306] sd 0:0:0:0: [sda] Write Protect is off
[ 60.960722] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 60.960789] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 60.964759] sda: sda1 sda2 sda3 sda128
[ 60.965645] sd 0:0:0:0: [sda] Attached SCSI disk
[ 60.968994] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[ 60.970337] Freeing unused kernel image (initmem) memory: 1304K
[ 60.989791] Write protecting the kernel read-only data: 20480k
[ 60.991658] Freeing unused kernel image (text/rodata gap) memory: 2044K
[ 60.992811] Freeing unused kernel image (rodata/data gap) memory: 728K
[ 60.993430] Run /sbin/init as init process
[ 60.993793] with arguments:
[ 60.993795] /sbin/init
[ 60.993798] with environment:
[ 60.993800] HOME=/
[ 60.993802] TERM=linux
[ 60.993804] BOOT_IMAGE=/boot/vmlinuz
[ 61.553086] init: Console is alive
[ 61.557339] kmodloader: loading kernel modules from /etc/modules-boot.d/
[ 61.597100] Key type encrypted registered
[ 61.599971] Button Hotplug driver version 0.4.1
[ 61.600868] raid6: skip pq benchmark and using algorithm avx2x4
[ 61.601358] raid6: using avx2x2 recovery algorithm
[ 61.601859] xor: automatically using best checksumming function avx
[ 61.605209] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 61.606698] igb: Intel(R) Gigabit Ethernet Network Driver
[ 61.607146] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 61.607823] sdhci-pltfm: SDHCI platform and OF driver helper
[ 61.608443] usbcore: registered new interface driver uas
[ 61.608919] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 61.613911] init: - preinit -
[ 61.815151] random: jshn: uninitialized urandom read (4 bytes read)
[ 61.819635] random: jshn: uninitialized urandom read (4 bytes read)
[ 61.821580] random: jshn: uninitialized urandom read (4 bytes read)
[ 65.863559] random: jshn: uninitialized urandom read (4 bytes read)
[ 65.928919] mount_root: loading kmods from internal overlay
[ 65.934559] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 65.936187] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 65.995382] loop0: detected capacity change from 0 to 1048576
[ 66.017684] random: procd: uninitialized urandom read (4 bytes read)
[ 66.034002] loop0: detected capacity change from 1048576 to 663552
[ 66.053252] F2FS-fs (loop0): Mounted with checkpoint version = 29da2eb0
[ 66.053845] block: attempting to load /tmp/f2fs_cfg/upper/etc/config/fstab
[ 66.054850] block: extroot: device not present, retrying in 5 seconds
[ 71.070454] block: extroot: cannot find device with UUID 1d0d5afa-3316-4102-a389-7e6430851f0c
[ 71.094075] loop0: detected capacity change from 0 to 1048576
[ 71.125820] loop0: detected capacity change from 1048576 to 663552
[ 71.130157] F2FS-fs (loop0): Mounted with checkpoint version = 29da2eb2
[ 71.131157] mount_root: loading kmods from internal overlay
[ 71.143964] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 71.144800] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[ 71.154136] block: attempting to load /tmp/f2fs_cfg/upper/etc/config/fstab
[ 71.155017] block: extroot: device not present, retrying in 5 seconds
[ 76.168999] block: extroot: cannot find device with UUID 1d0d5afa-3316-4102-a389-7e6430851f0c
[ 76.170028] mount_root: switching to f2fs overlay
[ 76.172252] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
[ 76.293142] urandom-seed: Seeding with /etc/urandom.seed
[ 76.432917] procd: - early -
[ 76.564449] squashfs: Unknown parameter 'discard'
[ 76.996052] procd: - ubus -
[ 77.062971] random: ubusd: uninitialized urandom read (4 bytes read)
[ 77.063693] random: ubusd: uninitialized urandom read (4 bytes read)
[ 77.064366] random: ubusd: uninitialized urandom read (4 bytes read)
[ 77.068944] procd: - init -
[ 77.226298] urngd: v1.0.2 started.
[ 77.231332] random: crng init done
[ 77.231631] random: 30 urandom warning(s) missed due to ratelimiting
[ 77.497165] kmodloader: loading kernel modules from /etc/modules.d/*
[ 77.516026] NET: Registered PF_ALG protocol family
[ 77.519254] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: [email protected]
[ 77.521132] ntfs3: Max link count 4000
[ 77.521447] ntfs3: Enabled Linux POSIX ACLs support
[ 77.521863] ntfs3: Warning: Activated 64 bits per cluster. Windows does not support this
[ 77.522526] ntfs3: Read-only LZX/Xpress compression included
[ 77.523379] NET: Registered PF_KEY protocol family
[ 77.524079] Initializing XFRM netlink socket
[ 77.524717] tun: Universal TUN/TAP device driver, 1.6
[ 77.527056] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 77.529269] e1000: Intel(R) PRO/1000 Network Driver
[ 77.529675] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 77.530369] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 77.530886] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 77.532120] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver
[ 77.532622] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 77.539664] cryptodev: driver 1.12 loaded.
[ 77.540176] i2c_dev: i2c /dev entries driver
[ 77.541034] GACT probability on
[ 77.541438] Mirror/redirect action on
[ 77.542570] u32 classifier
[ 77.542801] input device check on
[ 77.543107] Actions configured
[ 77.544618] fuse: init (API version 7.34)
[ 77.545430] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 77.548237] Bridge firewalling registered
[ 77.548668] Loading modules backported from Linux version v5.15.33-0-g06f50ca83ace
[ 77.549290] Backport generated by backports.git v5.15.33-1-0-g183c4ab2
[ 77.550574] e1000e: Intel(R) PRO/1000 Network Driver
[ 77.550986] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 77.551620] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to simplified (2000-8000 ints) mode
[ 77.552431] e1000e 0000:00:1f.6: Interrupt Mode set to 1
[ 77.796790] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 77.865370] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 40:8d:5c:be:59:ad
[ 77.866058] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 77.866686] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 77.872848] i40e: Intel(R) Ethernet Connection XL710 Network Driver
[ 77.873377] i40e: Copyright (c) 2013 - 2019 Intel Corporation.
[ 77.875674] iavf: Intel(R) Ethernet Adaptive Virtual Function Network Driver
[ 77.876267] Copyright (c) 2013 - 2018 Intel Corporation.
[ 77.878562] Intel(R) 2.5G Ethernet Linux Driver
[ 77.878951] Copyright(c) 2018 Intel Corporation.
[ 77.886011] mlx4_core: Mellanox ConnectX core driver v4.0-0
[ 77.886488] mlx4_core: Initializing 0000:01:00.0
[ 85.181035] mlx4_core 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:01.0 (capable of 63.008 Gb/s with 8.0 GT/s PCIe x8 link)
[ 85.203812] mlx4_en: Mellanox ConnectX HCA Ethernet driver v4.0-0
[ 85.204753] mlx4_en 0000:01:00.0: Activating port:1
[ 85.208261] mlx4_en: 0000:01:00.0: Port 1: Using 4 TX rings
[ 85.208723] mlx4_en: 0000:01:00.0: Port 1: Using 4 RX rings
[ 85.209449] mlx4_en: 0000:01:00.0: Port 1: Initializing port
[ 85.210378] mlx4_en 0000:01:00.0: registered PHC clock
[ 85.274094] r8125 2.5Gigabit Ethernet driver 9.010.01-NAPI-RSS loaded
[ 85.274680] r8125 0000:03:00.0: enabling device (0000 -> 0003)
[ 85.291736] r8125: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 85.294724] r8125 Copyright (C) 2022 Realtek NIC software team [email protected]
[ 85.294724] This program comes with ABSOLUTELY NO WARRANTY; for details, please see http://www.gnu.org/licenses/.
[ 85.294724] This is free software, and you are welcome to redistribute it under certain conditions; see http://www.gnu.org/licenses/.
[ 85.298714] usbcore: registered new interface driver r8152
[ 85.301428] usbcore: registered new interface driver rtl8150
[ 85.303992] usbcore: registered new interface driver ums-alauda
[ 85.304581] usbcore: registered new interface driver ums-cypress
[ 85.305182] usbcore: registered new interface driver ums-datafab
[ 85.305781] usbcore: registered new interface driver ums-freecom
[ 85.306384] usbcore: registered new interface driver ums-isd200
[ 85.306976] usbcore: registered new interface driver ums-jumpshot
[ 85.307575] usbcore: registered new interface driver ums-karma
[ 85.308173] usbcore: registered new interface driver ums-sddr09
[ 85.308767] usbcore: registered new interface driver ums-sddr55
[ 85.309361] usbcore: registered new interface driver ums-usbat
[ 85.309991] usbcore: registered new interface driver usblp
[ 85.315343] xt_time: kernel timezone is -0000
[ 85.422022] [drm] amdgpu kernel modesetting enabled.
[ 85.423219] usbcore: registered new interface driver aqc111
[ 85.424379] usbcore: registered new interface driver ax88179_178a
[ 85.429882] PPP generic driver version 2.4.2
[ 85.430374] PPP MPPE Compression module registered
[ 85.430930] NET: Registered PF_PPPOX protocol family
[ 85.431710] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 85.432353] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld [email protected]. All Rights Reserved.
[ 85.433634] batman_adv: B.A.T.M.A.N. advanced 2022.3-openwrt-1 (compatibility version 15) loaded
[ 85.514204] kmodloader: 1 module could not be probed
[ 85.514662] kmodloader: - oaf - 0
[ 86.769573] EXT4-fs (sda3): recovery complete
[ 86.770612] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: . Quota mode: disabled.
[ 88.058122] br-lan: port 1(eth0) entered blocking state
[ 88.058618] br-lan: port 1(eth0) entered disabled state
[ 88.059124] device eth0 entered promiscuous mode
[ 88.065045] mlx4_en: eth1: Steering Mode 1
[ 88.073992] mlx4_en: eth1: Link Down
[ 88.075895] 8021q: adding VLAN 0 to HW filter on device eth1
[ 88.077381] br-lan: port 2(eth1) entered blocking state
[ 88.077822] br-lan: port 2(eth1) entered disabled state
[ 88.078293] device eth1 entered promiscuous mode
[ 88.086684] eth2: 0xffffc90000450000, 1c:fd:08:79:ba:f6, IRQ 18
[ 91.116214] e1000e 0000:00:1f.6 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 91.116976] br-lan: port 1(eth0) entered blocking state
[ 91.117412] br-lan: port 1(eth0) entered forwarding state
[ 91.117940] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 91.501630] r8125: eth2: link up
[ 91.501953] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
[ 96.662354] pppoe-wan: renamed from ppp0
[ 106.728269] squashfs: Unknown parameter 'discard'
[ 106.728927] F2FS-fs (sda128): Magic Mismatch, valid(0xf2f52010) - read(0x89e45589)
[ 106.729589] F2FS-fs (sda128): Can't find valid F2FS filesystem in 1th superblock
[ 106.730347] F2FS-fs (sda128): Magic Mismatch, valid(0xf2f52010) - read(0x2e48937b)
[ 106.730971] F2FS-fs (sda128): Can't find valid F2FS filesystem in 2th superblock
[ 106.732160] exFAT-fs (sda128): invalid boot record signature
[ 106.732655] exFAT-fs (sda128): failed to read boot sector
[ 106.733107] exFAT-fs (sda128): failed to recognize exfat type
[ 106.734142] fuseblk: Unknown parameter 'discard'
[ 112.786471] init oaf sysctl...ok
[ 113.128839] TCP: request_sock_TCPv6: Possible SYN flooding on port 53. Sending cookies. Check SNMP counters.
[ 5935.191760] TCP: request_sock_TCPv6: Possible SYN flooding on port 53. Sending cookies. Check SNMP counters.
[ 7024.881669] e1000e 0000:00:1f.6 eth0: NIC Link is Down
[ 7024.882573] br-lan: port 1(eth0) entered disabled state
[ 7031.357886] mlx4_en: eth1: Link Up
[ 7031.358525] br-lan: port 2(eth1) entered blocking state
[ 7031.358978] br-lan: port 2(eth1) entered forwarding state
你这个要分析 为啥这个玩意那么高，这个网上搜索又遇到你这种的，看下是否是他们那种情况 https://blog.csdn.net/weixin_34526937/article/details/116838976 https://zhuanlan.zhihu.com/p/359807721 如果不行 把你非必要的软件关闭，e2g 这个你关下试试
你这个要分析 为啥这个玩意那么高，这个网上搜索又遇到你这种的，看下是否是他们那种情况 https://blog.csdn.net/weixin_34526937/article/details/116838976 https://zhuanlan.zhihu.com/p/359807721 如果不行 把你非必要的软件关闭，e2g 这个你关下试试
取消了e2g、ofa的选择，重新编译了，貌似在跑speedtest的时候，还是会高，观察1天看看。目前想到可能对性能有影响的 SQM、nlbwmon、WireGuard，不知道这几个有没有可能
nlbwmon这个应该有影响，我上次测试时，它占用比较高，就没编译它了。 https://i.imgur.com/C053LdX.png 我用ping0.cc tcpping我的端口，直接占满了，内网上网还行。210的1g端口
你这个明显是 oaf 的性能问题
oaf有可能，但是今天不编译oaf，关了大部分怀疑耗新能的软件，进过1天使用，累积了软中断后，也会越来越占用cpu。
参考我提的issue,同样的问题 #9322
by the way, 我没有开e2g,oaf这些东西，不过我有nlbwmon
有看到你的issue，我这里的表现就是进过1天使用，会越来越占CPU。明天尝试只编译少量软件再试试，nlbwmon也不编译了。
Possible SYN flooding on port 53 这个可以注意下，有可能dns相关配置或者插件有问题
这个是lan的设置
这个是DHCP/DNS设置
这个是Turbo ACC 网络加速设置
貌似没啥问题
目前将大多数可能和性能有关的软件都禁用了，在运行2天后，还是会出现网速明显降低的情况。 现在重新编译一个去掉可能耗性能软件的版本试一下。
可以先不用重装。出现问题的时候首先看连接信息，保存到文本文件以便于后边看有没有异常的连接。然后试试以下服务依次重启，每重启一个，就看看恢复正常没有，观察下哪个重启哪个以后就能恢复正常，如果可以恢复正常，范围就缩小很多了。 /etc/init.d/turboacc restart /etc/init.d/dnsmasq restart /etc/init.d/firewall reload 其他在用的插件。。。 最后再考虑这个 /etc/init.d/network restart
我觉得跟插件没关系，内核的问题，网卡驱动在大流量中fifo queue由于某些原因(可能是bug也可能是性能问题)有堆积，导致irq异常高处理不过来，我观察过，一旦问题发生，后面必然次次重现，除非重启，且网卡计数器里有不少的drop和overrunn
---原始邮件--- 发件人: @.> 发送时间: 2023年4月18日(周二) 中午12:09 收件人: @.>; 抄送: "michael @.@.>; 主题: Re: [coolsnowwolf/lede] 关于在活动连接、客户端多的时候，软中断变多，且CPU占用会变高，网速变慢的问题 (Issue #11099)
目前将大多数可能和性能有关的软件都禁用了，在运行2天后，还是会出现网速明显降低的情况。 现在重新编译一个去掉可能耗性能软件的版本试一下。
可以先不用重装。出现问题的时候首先看连接信息，保存到文本文件以便于后边看有没有异常的连接。然后试试以下服务依次重启，每重启一个，就看看恢复正常没有，观察下哪个重启哪个以后就能恢复正常，如果可以恢复正常，范围就缩小很多了。 /etc/init.d/turboacc restart /etc/init.d/dnsmasq restart /etc/init.d/firewall reload 其他在用的插件。。。 最后再考虑这个 /etc/init.d/network restart
— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
我觉得跟插件没关系，内核的问题，网卡驱动在大流量中fifo queue由于某些原因(可能是bug也可能是性能问题)有堆积，导致irq异常高处理不过来，我观察过，一旦问题发生，后面必然次次重现，除非重启，且网卡计数器里有不少的drop和overrunn … ---原始邮件--- 发件人: @.> 发送时间: 2023年4月18日(周二) 中午12:09 收件人: @.>; 抄送: "michael @.@.>; 主题: Re: [coolsnowwolf/lede] 关于在活动连接、客户端多的时候，软中断变多，且CPU占用会变高，网速变慢的问题 (Issue #11099) 目前将大多数可能和性能有关的软件都禁用了，在运行2天后，还是会出现网速明显降低的情况。 现在重新编译一个去掉可能耗性能软件的版本试一下。 可以先不用重装。出现问题的时候首先看连接信息，保存到文本文件以便于后边看有没有异常的连接。然后试试以下服务依次重启，每重启一个，就看看恢复正常没有，观察下哪个重启哪个以后就能恢复正常，如果可以恢复正常，范围就缩小很多了。 /etc/init.d/turboacc restart /etc/init.d/dnsmasq restart /etc/init.d/firewall reload 其他在用的插件。。。 最后再考虑这个 /etc/init.d/network restart — Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you commented.Message ID: @.***>
初步判断是内核的原因，我换了6.1.24内核编译，情况好很多，运行了2天没掉速，满速下CPU占用也没有那么高了，软中断也少了。过段时间我再多编译几个软件看看。
有没有运行OpenClash,我运行了这个一般2礼拜，或者开个百度网盘下个几个G东西，第2核的软中断就会100%，不管关闭什么软件都没用，只能重启（重启network服务，只能短暂释放，立马就又100%）
有没有运行OpenClash,我运行了这个一般2礼拜，或者开个百度网盘下个几个G东西，第2核的软中断就会100%，不管关闭什么软件都没用，只能重启（重启network服务，只能短暂释放，立马就又100%）
去掉了openclash编译(之前编译了，根本没启用）依然是这样，这个问题目前继续在困扰我，内核都升到6.1.60了，也不知道到底是什么鬼，就是跑speedtest 就 ksoftirq 100%， 重启能好，不定时就出来了。
这个问题直到今天也没有任何解决方案，网上有一堆人报这个问题
不知道解决没，后面我重新拉了新代码，重新编译之后好了，不知道现在代码有没有这个问题。