dnsname
dnsname copied to clipboard
containers do not start after reboot while dnsname enabled
I installed dnsname and tested it successfully: A PostgreSQL container "pgsql" is found by the other container "pgclient" - just by using the container name, cool! But after reboot I get lots of problems while starting the containers again. (Problems which I do NOT get without dnsname in /etc/cni/net.d/mynetwork.conflist
).
Errors 1:
reboot
podman ps
ERRO[0001] Error deleting network: stat /run/containers/cni/dnsname/mynetwork: no such file or directory
ERRO[0001] Error while removing pod from CNI network "mynetwork": stat /run/containers/cni/dnsname/mynetwork: no such file or directory
ERRO[0001] Error refreshing container 3dc5021379d9feac756e1c73daf87e94a53ee918447262f9160b270c375a6cd7: stat /run/containers/cni/dnsname/mynetwork: no such file or directory
ERRO[0001] Error deleting network: stat /run/containers/cni/dnsname/mynetwork: no such file or directory
ERRO[0001] Error while removing pod from CNI network "mynetwork": stat /run/containers/cni/dnsname/mynetwork: no such file or directory
ERRO[0001] Error refreshing container 8e034a3a3b503137e1f04aee29641e65627e53f2c8884aa404c9fcd57d017819: stat /run/containers/cni/dnsname/mynetwork: no such file or directory
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
podman ps # just doing it a second time after the reboot
# no error any more
Errors 2:
podman start pgsql
ERRO[0000] Error adding network: failed to allocate for range 0: 10.89.0.24 has been allocated to 8e034a3a3b503137e1f04aee29641e65627e53f2c8884aa404c9fcd57d017819, duplicate allocation is not allowed
ERRO[0000] Error while adding pod to CNI network "mynetwork": failed to allocate for range 0: 10.89.0.24 has been allocated to 8e034a3a3b503137e1f04aee29641e65627e53f2c8884aa404c9fcd57d017819, duplicate allocation is not allowed
Error: unable to start container "pgsql": error configuring network namespace for container 8e034a3a3b503137e1f04aee29641e65627e53f2c8884aa404c9fcd57d017819: failed to allocate for range 0: 10.89.0.24 has been allocated to 8e034a3a3b503137e1f04aee29641e65627e53f2c8884aa404c9fcd57d017819, duplicate allocation is not allowed
Instead of just starting the container pgsql I have to remove it, recreate it, and then start it. During creation I get ...
Errors 3:
podman rm pgclient pgsql
podman run -d -ti \
--name pgsql \
--net mynetwork \
--volume=/srv/myapp/config:/config:z \
--volume=/srv/myapp/pgsql/etc:/etc/postgresql:Z \
--volume=/srv/myapp/pgsql/log:/var/log/postgresql:Z \
--volume=/srv/myapp/pgsql/var:/var/lib/postgresql:Z \
--volume=/srv/myapp/pgsql/backup:/backup:Z \
--restart=always \
docker.easydb.de/pf/postgresql-11
ERRO[0000] Error adding network: failed to set bridge addr: could not set bridge's mac: invalid argument
ERRO[0000] Error while adding pod to CNI network "mynetwork": failed to set bridge addr: could not set bridge's mac: invalid argument
Error: error configuring network namespace for container c59bc99cc9f0de9b7d6f963c8a43ed1d052d8fdae90b5c91269a1a3303cb3359: failed to set bridge addr: could not set bridge's mac: invalid argument
podman start pgsql
# works then, finally
So the problems are not only lots of errors but foremost that I have to recreate the containers to get them started at all.
Environment:
- running podman as root
- RHEL 8.1
Installation of dnsname:
dnf install containernetworking-plugins dnsmasq
yum module install go-toolset
dnf group install "Development Tools"
cd /usr/src
git clone https://github.com/containers/dnsname
cd dnsname
make all
make install PREFIX=/usr
vi /etc/cni/net.d/mynetwork.conflist # adding the next block...
{
"type": "dnsname",
"domainName": "localdomain"
},
vi /etc/containers/libpod.conf # was empty, so I put in the next block...
cni_default_network = "mynetwork"
Are these containers using static IPs, by chance?
Thanks for the fast reply!
They do not use --ip=
. Is that what you are referring to?
Network:
podman network ls
NAME VERSION PLUGINS
podman 0.4.0 bridge,portmap,firewall,tuning
mynetwork 0.4.0 bridge,portmap,dnsname,firewall
cat /etc/cni/net.d/mynetwork.conflist
{
"cniVersion": "0.4.0",
"name": "mynetwork",
"plugins": [
{
"type": "bridge",
"bridge": "cni-podman1",
"isGateway": true,
"ipMasq": true,
"ipam": {
"type": "host-local",
"routes": [
{
"dst": "0.0.0.0/0"
}
],
"ranges": [
[
{
"subnet": "10.89.0.0/24",
"gateway": "10.89.0.1"
}
]
]
}
},
{
"type": "portmap",
"capabilities": {
"portMappings": true
}
},
{
"type": "firewall",
"backend": "firewalld"
}
]
}
... I also changed firewall-backend to firewalld
.
Versions:
cd /usr/src/dnsname
git log -1
commit 2e1d2e0732df49df460e0991f68bf2ccfcd102db (HEAD -> master, origin/master, origin/HEAD)
Date: Thu Feb 27 16:24:42 2020 -0600
yum list podman
Installed Packages
podman.x86_64 1.6.4-4.module+el8.1.1+5885+44006e55
yum list containernetworking-plugins
Installed Packages
containernetworking-plugins.x86_64 0.8.3-5.module+el8.2.0+5201+6b31f0d9
Alright, does not sound like anything I'm familiar with, then.
@baude Mind taking a look?
this should be reported as a bugzilla. please do so and let us know the number
this should be reported as a bugzilla. please do so and let us know the number
Bugzilla is some fine software. But which instance of bugzilla are you referring to? Do you have a URL for me?
Not that I am eager to post all that a 2nd time, but if that is what it takes, fine.
bugzilla.redhat.com
The Error 2 may be that you have enabled both firewall and iptable at the same time. disable firewall maybe it works