dymoprint

dymoprint copied to clipboard

LUT based label size and offset handler

6

Hopefully adding support to new printers will be easier with this. Related issues: #30 #40 #44 #47 #80

tomek-szczesny

Support for additional devices

6

# This issue has been migrated [here](https://github.com/labelle-org/labelle/issues/4). Please continue discussion there. There is a lot of discussion all over the place about support for other devices. Let's try to bring...

maresb

Allow larger tape sizes

2

I tried this program with the LabelWriter 400 and it works well! Only one issue is that the text is too small when printing on address stickers, as they wider...

Derkades

Application does not detect networked printer

8

Hi, I have an issue with the application. If i try to print via USB, this works. But i want to use this using a RPI on a network. I...

jayjayseal

420p label offset

106

The labels are printed offset to the bottom (when reading the text) of the label. Attached is a photo of the result (tested with release v2.2.1 on Linux): - a...

Mousketeer

Support for pixel fonts

1

Just leaving a note here so we won't forget. Would be great to fit 6 lines of text on a 9mm tape. :)

tomek-szczesny

Yeah it makes little sense if someone just wants to print their pictures.. or a test pattern.

tomek-szczesny

Understand and report on status codes

17

It would be nice to figure out the status code so that dymoprint could report the status. Here is [the manual for a different DYMO printer](https://download.dymo.com/dymo/technical-data-sheets/LW%20450%20Series%20Technical%20Reference.pdf#page=25) where they explain the...

maresb

Permission Denied on printer

12

Access is denied on printer when using udev TAG+="uaccess" rule; ``` # cat /etc/udev/rules.d/91-dymo-1001.rules ACTION=="add", SUBSYSTEMS=="usb", ATTRS{idVendor}=="0922", ATTRS{idProduct}=="1001", MODE="0660" TAG+="uaccess" ```

nathancatlow

Font-Size

8

It would be nice if you could change the font size.

EmJotGeh