comfyanonymous
High lora vram usage after update
Expected Behavior
Lora should load with minimal vram overhead (considering it is a small lora; the 4/4 rank one is 40mb).
Actual Behavior
Large vram usage increase when loading certain loras, in my case trained with ai-toolkit by Ostris. When using fp8_e4m3fn flux.dev, vram usage is 14.3gb, regardless of lora size (4/4, 16/16, 32/32). However, downloaded loras made with SimpleTuner only go up to 12.2gb usage. This is a problem when loading the fp16 model because it no longer fits on a 24gb vram GPU.
Steps to Reproduce
Load a lora made with ai-toolkit by Ostris
Debug Logs
Nothing special to report, but here is a log:
P:\text2image\ComfyUI_windows_portable_v008\ComfyUI_windows_portable>.\python_embeded\python.exe -s ComfyUI\main.py --windows-standalone-build --front-end-version Comfy-Org/ComfyUI_frontend@latest --lowvram
Prestartup times for custom nodes:
0.0 seconds: P:\text2image\ComfyUI_windows_portable_v008\ComfyUI_windows_portable\ComfyUI\custom_nodes\rgthree-comfy
Total VRAM 24564 MB, total RAM 97415 MB
pytorch version: 2.3.1+cu121
Set vram state to: LOW_VRAM
Device: cuda:0 NVIDIA GeForce RTX 4090 : cudaMallocAsync
Using pytorch cross attention
[Prompt Server] web root: P:\text2image\ComfyUI_windows_portable_v008\ComfyUI_windows_portable\ComfyUI\web_custom_versions\Comfy-Org_ComfyUI_frontend\1.2.20
### Loading: ComfyUI-Impact-Pack (V6.2)
### Loading: ComfyUI-Impact-Pack (Subpack: V0.6)
[WARN] ComfyUI-Impact-Pack: `ComfyUI` or `ComfyUI-Manager` is an outdated version.
[Impact Pack] Wildcards loading done.
[rgthree] Loaded 42 magnificent nodes.
[rgthree] Will use rgthree's optimized recursive execution.
Import times for custom nodes:
0.0 seconds: P:\text2image\ComfyUI_windows_portable_v008\ComfyUI_windows_portable\ComfyUI\custom_nodes\websocket_image_save.py
0.0 seconds: P:\text2image\ComfyUI_windows_portable_v008\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-MultiGPU-main
0.0 seconds: P:\text2image\ComfyUI_windows_portable_v008\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI_UltimateSDUpscale
0.0 seconds: P:\text2image\ComfyUI_windows_portable_v008\ComfyUI_windows_portable\ComfyUI\custom_nodes\rgthree-comfy
0.5 seconds: P:\text2image\ComfyUI_windows_portable_v008\ComfyUI_windows_portable\ComfyUI\custom_nodes\ComfyUI-Impact-Pack
Starting server
To see the GUI go to: http://127.0.0.1:8188
got prompt
[rgthree] Using rgthree's optimized recursive execution.
[rgthree] First run patching recursive_output_delete_if_changed and recursive_will_execute.
[rgthree] Note: If execution seems broken due to forward ComfyUI changes, you can disable the optimization from rgthree settings in ComfyUI.
model weight dtype torch.float8_e4m3fn, manual cast: torch.bfloat16
model_type FLUX
Requested to load FluxClipModel_
Loading 1 new model
clip missing: ['text_projection.weight']
Requested to load Flux
Loading 1 new model
0%| | 0/50 [00:00<?, ?it/s]P:\text2image\ComfyUI_windows_portable_v008\ComfyUI_windows_portable\ComfyUI\comfy\ldm\modules\attention.py:407: UserWarning: 1Torch was not compiled with flash attention. (Triggered internally at ..\aten\src\ATen\native\transformers\cuda\sdp_utils.cpp:455.)
out = torch.nn.functional.scaled_dot_product_attention(q, k, v, attn_mask=mask, dropout_p=0.0, is_causal=False)
76%|██████████████████████████████████████████████████████████████▎ | 38/50 [00:25<00:08, 1.49it/s]got prompt
100%|██████████████████████████████████████████████████████████████████████████████████| 50/50 [00:33<00:00, 1.49it/s]
Using pytorch attention in VAE
Using pytorch attention in VAE
Requested to load AutoencodingEngine
Loading 1 new model
Prompt executed in 127.00 seconds
Other
It seems that yesterday's update which makes loading ai-toolkit loras possible (avoiding all the missing key errors) has introduced an issue where vram usage goes up significantly, no matter how small the lora is. I am using 'LoadLoraModelOnly' and 'Load Diffusion Model' nodes. I have tried other nodes, --lowvram, --normalvram, disabling nvidia cuda fallback, updating comfyui, turning off Manager, disabling rgthree optimization, nothing makes a difference. Thanks in advance
i also noticed an increase in inference time going very close to 23.6 vram and maybe offloading to ram while running a lora even on fp8
Same thing here. I reinstalled the standalone from the read-me, reinstalled pytorch, still eats all my VRAM and causes comfyui to crash after a couple generations every time.
Same, one generation is slow the other is faster then slower and even slower.
I noticed that the UNETLoader.load_unet takes a lot more memory since the most recent changes when loading a FLUX transformer unet of weight_dtype fp8_e4m3fn.
Before the changes I could stay under 12GB total VRAM usage when loading a fp8_e4m3fn version of the flux1-schnell after first loading the t5xxl text decoder (given a minor tweak to unet_offload_device - see https://github.com/comfyanonymous/ComfyUI/pull/4319).
After the changes, I run into the 16GB memory limit when the FLUX transformer unet is loaded.
See also https://github.com/comfyanonymous/ComfyUI/issues/4341, https://github.com/comfyanonymous/ComfyUI/issues/4318 & https://github.com/comfyanonymous/ComfyUI/issues/4338
Can you try running it with: --disable-cuda-malloc to see if it improves things?
Can you try running it with: --disable-cuda-malloc to see if it improves things?
it works fine with --disable-cuda-malloc 4060ti 16g torch 2.3.1 cuda 1.2.1
error without --disable-cuda-malloc
Error occurred when executing KSampler:
Allocation on device
File "D:\sd-ComfyUI\ComfyUI\execution.py", line 152, in recursive_execute output_data, output_ui = get_output_data(obj, input_data_all) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\execution.py", line 82, in get_output_data return_values = map_node_over_list(obj, input_data_all, obj.FUNCTION, allow_interrupt=True) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\execution.py", line 75, in map_node_over_list results.append(getattr(obj, func)(**slice_dict(input_data_all, i))) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\nodes.py", line 1382, in sample return common_ksampler(model, seed, steps, cfg, sampler_name, scheduler, positive, negative, latent_image, denoise=denoise) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\nodes.py", line 1352, in common_ksampler samples = comfy.sample.sample(model, noise, steps, cfg, sampler_name, scheduler, positive, negative, latent_image, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\custom_nodes\ComfyUI-Impact-Pack\modules\impact\sample_error_enhancer.py", line 22, in informative_sample raise e File "D:\sd-ComfyUI\ComfyUI\custom_nodes\ComfyUI-Impact-Pack\modules\impact\sample_error_enhancer.py", line 9, in informative_sample return original_sample(*args, **kwargs) # This code helps interpret error messages that occur within exceptions but does not have any impact on other operations. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\custom_nodes\ComfyUI-AnimateDiff-Evolved\animatediff\sampling.py", line 279, in motion_sample return orig_comfy_sample(model, noise, *args, **kwargs) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\comfy\sample.py", line 43, in sample samples = sampler.sample(noise, positive, negative, cfg=cfg, latent_image=latent_image, start_step=start_step, last_step=last_step, force_full_denoise=force_full_denoise, denoise_mask=noise_mask, sigmas=sigmas, callback=callback, disable_pbar=disable_pbar, seed=seed) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\comfy\samplers.py", line 829, in sample return sample(self.model, noise, positive, negative, cfg, self.device, sampler, sigmas, self.model_options, latent_image=latent_image, denoise_mask=denoise_mask, callback=callback, disable_pbar=disable_pbar, seed=seed) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\comfy\samplers.py", line 729, in sample return cfg_guider.sample(noise, latent_image, sampler, sigmas, denoise_mask, callback, disable_pbar, seed) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\comfy\samplers.py", line 706, in sample self.inner_model, self.conds, self.loaded_models = comfy.sampler_helpers.prepare_sampling(self.model_patcher, noise.shape, self.conds) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\comfy\sampler_helpers.py", line 66, in prepare_sampling comfy.model_management.load_models_gpu([model] + models, memory_required=memory_required, minimum_memory_required=minimum_memory_required) File "D:\sd-ComfyUI\ComfyUI\comfy\model_management.py", line 527, in load_models_gpu cur_loaded_model = loaded_model.model_load(lowvram_model_memory, force_patch_weights=force_patch_weights) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\comfy\model_management.py", line 325, in model_load raise e File "D:\sd-ComfyUI\ComfyUI\comfy\model_management.py", line 321, in model_load self.real_model = self.model.patch_model(device_to=patch_model_to, patch_weights=load_weights) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\comfy\model_patcher.py", line 349, in patch_model self.patch_weight_to_device(key, device_to) File "D:\sd-ComfyUI\ComfyUI\comfy\model_patcher.py", line 327, in patch_weight_to_device temp_weight = comfy.model_management.cast_to_device(weight, device_to, torch.float32, copy=True) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "D:\sd-ComfyUI\ComfyUI\comfy\model_management.py", line 840, in cast_to_device return tensor.to(device, dtype, copy=copy, non_blocking=non_blocking) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Update and let me know if it's fixed.
updated and runs fine without adding '--cuda-malloc'. after adding '--cuda-malloc', i got OOM again
After updating, and without specifying any cuda-malloc related args, vram usage and inference speed are back to normal. Restarted and ran several times without any issues. It was consistently failing before the update.
Thanks, comfy.
On my system with a 3070Ti 8GB VRAM and 32GB RAM, I have the inverse problem. The default Cuda malloc was providing relatively good performances with Flux, without a noticeable downgrade when loading a LoRA. The new default downgrade the performance roughly 5 times.
The --cuda-malloc option works correctly to get the previous behavior.
Second Danamir. I'm running on a laptop featuring a 4060 8GB VRAM and 16GB RAM. Before the update, flux nf4 was using around 7.4GB of VRAM and 30GB of RAM when generating a high-res image. But after the update, the VRAM usage went up to 8.3GB exceeding the available dedicated VRAM, as a result, the rendered time went from 3.20 mins to a whooping 24 mins! Luckily, --cuda-malloc fixed the issue and now it's behaving as before prior to the update.
After this went through, some images generated with Lora come out blurry for some reason. Seems random. Saw someone else had the same prob on a reddit thread.
Reverted the change because it was causing too many issues. If you encounter the lora issue and need to use --disable-cuda-malloc to fix it let me know what your system specs are.
Reverted the change because it was causing too many issues. If you encounter the lora issue and need to use --disable-cuda-malloc to fix it let me know what your system specs are.
Yeah I think that was the safest thing to do. Thanks for your reactivity !
I have rtx 2060 6gig .. original flux dev took 5 minutes per generation and flux nf4 took one hour. Updated everything tried with and without disable-cuda-malloc and still take forever for nf4 version. Is it possible that RTX 2000 series are not supported?
In my case, --disable-cuda-malloc combined with --lowvram solves the issue at fp8, but not at fp16. The loras made with ai-toolkit are still loaded very very slowly and with extra vram usage. 4090 24gb, 96gb ram
Not specifically Lora related, but since updating to use Flux I’ve noticed some of my old SDXL workflows that were right on the edge of my machines memory limits now OOM. I pulled the latest revert and tried the cuda malloc flags and it didn’t help. I reverted to an older commit from before Flux just to be safe and things work again as normal.
Peeking at the commit history I found this: https://github.com/comfyanonymous/ComfyUI/commit/b8ffb2937f9daeaead6e9225f8f5d1dde6afc577
Wondering if that could be the cause as it appears to increase the amount of memory required by adding a larger buffer (100 to 300)?
Not specifically Lora related, but since updating to use Flux I’ve noticed some of my old SDXL workflows that were right on the edge of my machines memory limits now OOM. I pulled the latest revert and tried the cuda malloc flags and it didn’t help. I reverted to an older commit from before Flux just to be safe and things work again as normal.
Peeking at the commit history I found this: b8ffb29
Wondering if that could be the cause as it appears to increase the amount of memory required by adding a larger buffer (100 to 300)?
Can you modify only that specific value in the latest version and test it for us?
In my case, --disable-cuda-malloc combined with --lowvram solves the issue at fp8
It solved the issue for me too, using Flux with Fp8 before I couldn't load some anime/fae Loras, now with these 2 arguments I can load multiple loras I couldn't before. Im on a 4080, 64gb
If you encounter the lora issue and need to use --disable-cuda-malloc to fix it let me know what your system specs are.
4080. 32GB system RAM. Win 10. Loading Flux Dev in fp8 with an fp8 text encoder.
Driver version didn't make a difference. Had problems on both 1 year old drivers and latest game ready drivers.
Torch version didn't make a difference. Had problems on both torch 2.1(?) and 2.3.1
I have a 3090 with 16GB of system RAM. I run Flux Dev with fp16, with one Lora at a time using the normal vram mode.
I still have an issue after recent commits, however the --disable-cuda-malloc command seems to fix it.
When I run that command, the VRAM usage goes back down once a creation finishes. For me it idles around 14GB. When I don't run that command, VRAM usage idles at 17GB, and any adjustments cause subsequent runs to max out usage and cause speeds like 27s/it
I'm running a RTX 3080 10GB, 64GB DDR5, Zen4 7950X, comfyui portable and noticed this behaviour after updating through the manager add-on in the last couple of days or so.
I went from ~2s/it up to 20+ s/it for an identical workflow.
I reinstalled (I'd kept the archive - commit hash b334605) and everything went back to normal with that version.
i wonder if mimalloc would have any place here
we use it on other tools/use-cases with memory-intensive workloads to overload the memalloc call on linux into one from microsoft's mimalloc, which has better (read: more efficient) support for huge pages and large TBL, among other things.
another one would be jemalloc which seems to offer some benefits for different operations with dense compute calls, eg. using SwiGLU.
here is an example
enable_mimalloc() {
! [ -z "${MIMALLOC_DISABLE}" ] && echo "mimalloc disabled." && return
LIBMIMALLOC_PATH='/usr/lib64/libmimalloc.so'
if ! [ -f "${LIBMIMALLOC_PATH}" ]; then
echo "mimalloc doesn't exist. You might really want to install this."
else
echo "Enabled mimalloc."
export MIMALLOC_ALLOW_LARGE_OS_PAGES=1
export MIMALLOC_RESERVE_HUGE_OS_PAGES=0 # Use n 1GiB pages
export MALLOC_ARENA_MAX=1 # Tell Glibc to only allocate memory in a single "arena".
export MIMALLOC_PAGE_RESET=0 # Signal when pages are empty
export MIMALLOC_EAGER_COMMIT_DELAY=4 # The first 4MiB of allocated memory won't be hugepages
export MIMALLOC_SHOW_STATS=0 # Display mimalloc stats
export LD_PRELOAD="${LD_PRELOAD} ${LIBMIMALLOC_PATH}"
return
fi
LIBHUGETLBFS_PATH="/usr/lib64/libhugetlbfs.so"
if [ -f "${LIBHUGETLBFS_PATH}" ]; then
export LD_PRELOAD="${LD_PRELOAD} ${LIBHUGETLBFS_PATH}"
export HUGETLB_MORECORE=thp
export HUGETLB_RESTRICT_EXE=python3.11
echo "Enabled libhugetlbfs parameters for easy huge page support."
else
echo "You do not even have libhugetlbfs installed. There is very little we can do for your performance here."
fi
}
configure_mempool() {
export HUGEADM_PATH
export HUGEADM_CURRENTSIZE
# Current pool size (allocated hugepages)
HUGEADM_CURRENTSIZE=$(hugeadm --pool-list | grep "${HUGEADM_POOLSIZE}" | awk '{ print $3; }')
# Maximum pool size (how many hugepages)
HUGEADM_MAXIMUMSIZE=$(hugeadm --pool-list | grep "${HUGEADM_POOLSIZE}" | awk '{ print $4; }')
HUGEADM_PATH=$(which hugeadm)
if [ -z "${HUGEADM_PATH}" ]; then
echo 'hugeadm is not installed. Was unable to configure the system hugepages pool size.'
fi
export HUGEADM_FREE
export TARGET_HUGEPAGESZ=0 # By default, we'll assume we need to allocate zero pages.
HUGEADM_FREE=$(expr "${HUGEADM_MAXIMUMSIZE}" - "${HUGEADM_CURRENTSIZE}")
if [ "${HUGEADM_FREE}" -lt "${HUGEADM_PAGESZ}" ]; then
# We don't have enough free hugepages. Let's go for gold and increase it by the current desired amount.
TARGET_HUGEPAGESZ=$(expr "${HUGEADM_PAGESZ}" - "${HUGEADM_FREE}")
sudo "${HUGEADM_PATH}" --hard --pool-pages-max "2MB:${TARGET_HUGEPAGESZ}" || echo "Could not configure hugepages pool size via hugeadm."
echo "Added ${TARGET_HUGEPAGESZ} to system hugepages memory pool."
else
echo "We have enough free pages (${HUGEADM_FREE} / ${HUGEADM_MAXIMUMSIZE}). Continuing."
fi
}
restore_mempool() {
if [ "${TARGET_HUGEPAGESZ}" -gt 0 ]; then
echo "Being a good citizen and restoring memory pool size back to ${HUGEADM_MAXIMUMSIZE}."
sudo "${HUGEADM_PATH}" --hard --pool-pages-max "2MB:${HUGEADM_MAXIMUMSIZE}" || echo "Could not configure hugepages pool size via hugeadm."
else
TOTAL_MEM_WASTED=$(expr "${HUGEADM_MAXIMUMSIZE}" \* 2)
echo "There were no extra hugepages allocated at startup, so there is nothing to clean up now. You could free ${TOTAL_MEM_WASTED}M for other applications by reducing the maximum pool size to zero by default."
fi
}
### How to load / use it
configure_mempool
enable_mimalloc
## call comfyui here
. ./start_ui.sh # or the correct start command
# Unconfigure hugepages if we've altered the system environment.
restore_mempool
you'll need libhugetlbfs and mimalloc installed from https://github.com/microsoft/mimalloc
it gives me a 6-40% speedup on various operations but nothing consistent across the board. the total speedup for a generation was 13%.
Not specifically Lora related, but since updating to use Flux I’ve noticed some of my old SDXL workflows that were right on the edge of my machines memory limits now OOM. I pulled the latest revert and tried the cuda malloc flags and it didn’t help. I reverted to an older commit from before Flux just to be safe and things work again as normal. Peeking at the commit history I found this: b8ffb29 Wondering if that could be the cause as it appears to increase the amount of memory required by adding a larger buffer (100 to 300)?
Can you modify only that specific value in the latest version and test it for us?
I tried both, both were OOM on my 4090(I can run it within memory once or twice on a fresh restart of windows), the former commit if anything was slower, both took up about 23.4GB of VRAM, and 1.5GB of shared. Tested once
(20 steps, default settings, lora loaded)
Current: 300 * 1024 * 1024
loaded partially 21661.2 21637.845825195312 11
100%|██████████████████████████████████████████████████████████████████████████████████| 20/20 [05:16<00:00, 15.81s/it]
Using pytorch attention in VAE
Using pytorch attention in VAE
Requested to load AutoencodingEngine
Loading 1 new model
Prompt executed in 407.55 seconds
Old: 100 * 1024 * 1024 *
loaded partially 21661.2 21637.845825195312 11
100%|██████████████████████████████████████████████████████████████████████████████████| 20/20 [06:00<00:00, 18.02s/it]
Using pytorch attention in VAE
Using pytorch attention in VAE
Requested to load AutoencodingEngine
Loading 1 new model
Prompt executed in 439.91 seconds
I would like to mention sampling using both kohya and ostrisai's lora trainer use quite a bit less vram, and never oom, so this model should fit eventually :)
Sampling at 20 steps, takes about 25-35 seconds using ostrisai's
Can you try running it with: --disable-cuda-malloc to see if it improves things?
What does that do? Will I need it on my RTX 3070 8GB to avoid potential problems?
Running Forge with FLUX 1d NF without --cuda-malloc (console suggests to enable it, meaning it's not) still causes an OOM (16gb VRAM). I assume Forge uses same components as Comfy for FLUX, making this is relevant
Begin to load 1 model [Unload] Trying to free 9411.13 MB for cuda:0 with 0 models keep loaded ... [Unload] Current free memory is 9773.37 MB ... [Memory Management] Current Free GPU Memory: 9773.37 MB [Memory Management] Required Model Memory: 6246.84 MB [Memory Management] Required Inference Memory: 1024.00 MB [Memory Management] Estimated Remaining GPU Memory: 2502.53 MB Patching LoRAs: 43%|███████████████████████████▎ | 130/304 [00:06<00:08, 19.72it/s]ERROR lora diffusion_model.double_blocks.13.img_mod.lin.weight CUDA out of memory. Tried to allocate 216.00 MiB. GPU Patching LoRAs: 44%|████████████████████████████▍ | 135/304 [00:06<00:12, 13.30it/s]ERROR lora diffusion_model.double_blocks.13.txt_mod.lin.weight CUDA out of memory. Tried to allocate 216.00 MiB. GPU ERROR lora diffusion_model.double_blocks.13.txt_attn.qkv.weight CUDA out of memory. Tried to allocate 108.00 MiB. GPU Patching LoRAs: 45%|████████████████████████████▊ | 137/304 [00:06<00:11, 14.01it/s]ERROR lora diffusion_model.double_blocks.13.txt_mlp.0.weight CUDA out of memory. Tried to allocate 144.00 MiB. GPU Patching LoRAs: 46%|█████████████████████████████▎ | 139/304 [00:06<00:08, 19.95it/s] Traceback (most recent call last): File "F:\projects\AI\webui_forge_cu121_torch231\webui\modules_forge\main_thread.py", line 30, in work self.result = self.func(*self.args, **self.kwargs) File "F:\projects\AI\webui_forge_cu121_torch231\webui\modules\txt2img.py", line 110, in txt2img_function processed = processing.process_images(p) File "F:\projects\AI\webui_forge_cu121_torch231\webui\modules\processing.py", line 809, in process_images res = process_images_inner(p) File "F:\projects\AI\webui_forge_cu121_torch231\webui\modules\processing.py", line 952, in process_images_inner samples_ddim = p.sample(conditioning=p.c, unconditional_conditioning=p.uc, seeds=p.seeds, subseeds=p.subseeds, subseed_strength=p.subseed_strength, prompts=p.prompts) File "F:\projects\AI\webui_forge_cu121_torch231\webui\modules\processing.py", line 1323, in sample samples = self.sampler.sample(self, x, conditioning, unconditional_conditioning, image_conditioning=self.txt2img_image_conditioning(x)) File "F:\projects\AI\webui_forge_cu121_torch231\webui\modules\sd_samplers_kdiffusion.py", line 194, in sample sampling_prepare(self.model_wrap.inner_model.forge_objects.unet, x=x) File "F:\projects\AI\webui_forge_cu121_torch231\webui\backend\sampling\sampling_function.py", line 356, in sampling_prepare memory_management.load_models_gpu( File "F:\projects\AI\webui_forge_cu121_torch231\webui\backend\memory_management.py", line 575, in load_models_gpu loaded_model.model_load(model_gpu_memory_when_using_cpu_swap) File "F:\projects\AI\webui_forge_cu121_torch231\webui\backend\memory_management.py", line 384, in model_load raise e File "F:\projects\AI\webui_forge_cu121_torch231\webui\backend\memory_management.py", line 380, in model_load self.real_model = self.model.forge_patch_model(patch_model_to) File "F:\projects\AI\webui_forge_cu121_torch231\webui\backend\patcher\base.py", line 228, in forge_patch_model self.lora_loader.refresh(target_device=target_device, offload_device=self.offload_device) File "F:\projects\AI\webui_forge_cu121_torch231\webui\backend\patcher\lora.py", line 352, in refresh weight = weight.to(dtype=torch.float32) torch.cuda.OutOfMemoryError: CUDA out of memory. Tried to allocate 144.00 MiB. GPU CUDA out of memory. Tried to allocate 144.00 MiB. GPU
