chop saw table tuning

[LukasFreeze]

We moved the chop saw to make room for the new dust extraction - some adjustments are necessary now (some because of the move, some for a while already)

• [x] level/stabilize both workbenches (the feet can be turned, no need for pieces of wood like before...)
• [x] connect workbenches so the next step makes any sense
• [ ] fine-tune table extension
  • [ ] fix the ruler error (move the whole thing 1 mm away from the saw if I'm not mistaken)
  • [x] screw to the left workbench at precisely 90° to the saw blade

[LukasFreeze]

Jan tackled this tonight 💪

However, the ruler adjustment is a bit trickier than anticipated and his error was +1 and not -1 like I got in summer. So we will wait for further feedback and just noted "+- 1 mm" on the stop for now 😵‍💫