cminyard
Unknown (debug?) message spam when running ser2net
I have noticed that ser2net spams some unknown messages to terminal:
...
A: 1
B: 4 none
C: 0
...
Nothing else is ever being printed, only these 3 and always identical lines every 0.5-1.5s.
Messages don't seem to appear on connect/usage of telnet. Nothing was done on admin console and spam persists after restarting ser2net (which I assume resets any monitoring and other changes done over admin console)
Noticed problem with ser2net 4.6.0 so I built latest ser2net (and gensio) master (4.6.1+), but messages still appear.
There could very well be problems with our FTDI devices, but I don't see any problematic messages in dmesg, so I would like to figure out what those messages mean.
Running ser2net with ser2net -c /etc/ser2net/ser2net.yaml -n -d, had also added -l but that did not change output.
OS: Ubuntu 22.04.4 LTS
Config YAML
%YAML 1.1
---
# This is a ser2net configuration file, tailored to be rather
# simple.
#
# Find detailed documentation in ser2net.yaml(5)
# A fully featured configuration file is in
# /usr/share/doc/ser2net/examples/ser2net.yaml.gz
#
# If you find your configuration more useful than this very simple
# one, please submit it as a bugreport
admin: &admin1
accepter: tcp,2000
#########################
connection: &con101
accepter: telnet(rfc2217),tcp,38101
connector: serialdev,/dev/serial/by-path/pci-0000:00:14.0-usb-0:10.5:1.0-port0,115200n81,local
enable: on
timeout: 18000
options:
max-connections: 7
...
On Apr 24, 2024 1:05 AM, ffolkes1911 @.***> wrote: I have noticed that ser2net spams some unknown messages to terminal: ... A: 1 B: 4 none C: 0 ...I apologize, some debugging cruft got left in. I'll get a release out today with that remove.-corey
Nothing else is ever being printed, only these 3 and always identical lines every 0.5-1.5s. Messages don't seem to appear on connect/usage of telnet. Nothing was done on admin console and spam persists after restarting ser2net (which I assume resets any monitoring and other changes done over admin console) Noticed problem with ser2net 4.6.0 so I built latest ser2net (and gensio) master (4.6.1+), but messages still appear. There could very well be problems with our FTDI devices, but I don't see any problematic messages in dmesg, so I would like to figure out what those messages mean. Running ser2net with ser2net -c /etc/ser2net/ser2net.yaml -n -d, had also added -l but that did not change output. OS: Ubuntu 22.04.4 LTS Config YAML %YAML 1.1
This is a ser2net configuration file, tailored to be rather
simple.
Find detailed documentation in ser2net.yaml(5)
A fully featured configuration file is in
/usr/share/doc/ser2net/examples/ser2net.yaml.gz
If you find your configuration more useful than this very simple
one, please submit it as a bugreport
admin: &admin1 accepter: tcp,2000
#########################
connection: &con101 accepter: telnet(rfc2217),tcp,38101 connector: serialdev,/dev/serial/by-path/pci-0000:00:14.0-usb-0:10.5:1.0-port0,115200n81,local enable: on timeout: 18000 options: max-connections: 7
...
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you are subscribed to this thread.Message ID: @.***>
