Mowgli

Mowgli copied to clipboard

Hi i dont know where to ask :-) any body know if the cheaper IMU also should work? Is it alo good for our openmower? https://www.amazon.de/BIlinli-LSM303D-Druckfeld-L3G4200D-Gyroskopmodul-Sensoren/dp/B07VT681HB

d0m1n1qu3

Hi, is it necessary to use RPI 4? I've got RPI 2B in my scaps so can it handle it?

Pawel-sp9pw

Yardforce NX100i

2

Hello, I am going to use Mowgli on my Yardforce NX100i. The NX100i has a GForce RM-MB-V6.0.0 Mainboard so Mowgli will work (I have already flashed it ;-) ). I...

Strambauer

Hey, i managed to back up the firmware of the SA900ECO's stock mainboard with the raspi, but the Panel is not working. **Panel PCB Revision:** RM-ECOW-1.0.0 **IC Model**: STM32F030 my...

jak83A

Hello, Do you have any idea if this would work with the Yardforce Amiro 400 ? Thanks

gomme600

SA900ECO Firmware

1

Hi. I found this repo in the OpenMower discord and I am very interested in your solution. Using the Stock Mainboard to Drive all Motors is awesome. Can you Tell...

dreitakter

The default GCC 7.2.1 package is not available, use 9.3.1 (from https://community.platformio.org/t/toolchain-gccarmnoneeabi-for-aarch64/15973/10)

olliewalsh