quiche(http3) is slower than HTTP2

[bhzhu203]

The average request_time value of the http3 is quite higher than HTTP2's in our prodution enviroment for USA users.

In the document introduction , the response time of http3 will be more stable and lower than TCPs'. But in our real prodution enviroment(USA/AU/EU users), it is diffrent. While the avg response time of http2 is 0.037s , the avg response time of quiche(http3) is 0.549s. Is the UDP flow set low priority by most telecom providers?

version b3c73e3dc64e7fa7360696100e5cba6d51547ec + nginx patch https://github.com/cloudflare/quiche/tree/master/nginx

HTTP3 is always slow

By the way , another nginx patch I have tried which can reduce value the request avg response :

nginx-1.24.0 with threads support + patch of kn007

https://github.com/kn007/patch/blob/master/nginx_with_quic.patch

[LPardue]

Thanks for the report.

Can you explain a bit more about how you measure response time please?

Are you measuring timings over the same page? Or at least pages of roughly equal size? What is the page/asset size?

[bhzhu203]

Thanks for the report.

Can you explain a bit more about how you measure response time please?

Are you measuring timings over the same page? Or at least pages of roughly equal size? What is the page/asset size?

The request_time is from the nginx logs.

The log result above is order by cost in a period of time , such as 24 hours , the request_time of HTTP3 is always on the top . The first picture is that every hour average request_time to make a graph.

NO HTTP3: select now() as time, avg(cost) as NTTP3_COST where rq not like '%HTTP/3%' HTTP3 : select now() as time, avg(cost) as HTTP3_COST where rq like '%HTTP/3%'

   log_format compression escape=json '{"@timestamp":"$time_iso8601",'
                           '"ip":"$remote_addr","host":"$http_host",'
                           '"rq":"$request","rqb":"$request_body",'
                           '"st":"$status","size":$body_bytes_sent,'
                           '"ua":"$http_user_agent","ck":"$http_cookie",'
                           '"cost":"$request_time",'
                           '"ref":"$http_referer",'
                           '"xff":"$http_x_forwarded_for",'
                           '"ust":"$upstream_status",'
                           '"uip":"$upstream_addr",'
                           '"ut":"$upstream_response_time"}';
  
    access_log  logs/access.log  compression;

Our website is https://www.yfn.com , having HTTP3 and HTTP2 service at the same time.

We do not set the "alt-svc" header . Because I have found that some clients having no mature HTTP3 fuction (maybe lower HTTP3 version supported) which request_time too high in the nginx logs. Other clients still can connect to our HTTP3 service without "alt-svc" header although(I think that their HTTP3 verions are higher enough).

You could have a test for our website.

[LPardue]

Server side request_time isn't a very accurate measure because once data is handed off to the kernel the application loses visibility, especially true for TCP.

Have you confirmed these results using client-side measurements?

[bhzhu203]

Server side request_time isn't a very accurate measure because once data is handed off to the kernel the application loses visibility, especially true for TCP.

Have you confirmed these results using client-side measurements?

No using client-side measurements yet, just server-side request_time. But I have found that the speed of HTTP3 has less advantage compared to HTTP2.

In some sitations : some of our employees have encountered that our web page loading slowly . Then found that some small resources (<100kB) using HTTP3 downloaded even > 60s in F12 console .

[bhzhu203]

After switch to offical nginx-quic , it the latency becomes more stable and lower , very close to HTTP2's.

[Ryenum]

Hello, I encountered some problems when configuring the quic service of NGINX. My configuration is the same as the official website, but I still cannot use the quic protocol when accessing the server， and h2 protocol is still used. This is the configuration: server { # Enable QUIC and HTTP/3. listen 443 quic reuseport; server_name test.cn;

    # Enable HTTP/2 (optional).
    listen 443 ssl http2;

    ssl_certificate      /usr/local/nginx/conf/cert/test.pem;
    ssl_certificate_key  /usr/local/nginx/conf/cert/test.key;

    # Enable all TLS versions (TLSv1.3 is required for QUIC).
    ssl_protocols TLSv1 TLSv1.1 TLSv1.2 TLSv1.3;

    # Add Alt-Svc header to negotiate HTTP/3.
    add_header alt-svc 'h3=":443"; ma=86400';
    
}

[bhzhu203]

Hello, I encountered some problems when configuring the quic service of NGINX. My configuration is the same as the official website, but I still cannot use the quic protocol when accessing the server， and h2 protocol is still used. This is the configuration: server { # Enable QUIC and HTTP/3. listen 443 quic reuseport; server_name test.cn;

    # Enable HTTP/2 (optional).
    listen 443 ssl http2;

    ssl_certificate      /usr/local/nginx/conf/cert/test.pem;
    ssl_certificate_key  /usr/local/nginx/conf/cert/test.key;

    # Enable all TLS versions (TLSv1.3 is required for QUIC).
    ssl_protocols TLSv1 TLSv1.1 TLSv1.2 TLSv1.3;

    # Add Alt-Svc header to negotiate HTTP/3.
    add_header alt-svc 'h3=":443"; ma=86400';
    
}

Maybe you could try the firefox or EDGE rather than Chrome . I think the browser manages the protocols swithing .

[Ryenum]

Hello, I encountered some problems when configuring the quic service of NGINX. My configuration is the same as the official website, but I still cannot use the quic protocol when accessing the server， and h2 protocol is still used. This is the configuration: server { # Enable QUIC and HTTP/3. listen 443 quic reuseport; server_name test.cn;

    # Enable HTTP/2 (optional).
    listen 443 ssl http2;

    ssl_certificate      /usr/local/nginx/conf/cert/test.pem;
    ssl_certificate_key  /usr/local/nginx/conf/cert/test.key;

    # Enable all TLS versions (TLSv1.3 is required for QUIC).
    ssl_protocols TLSv1 TLSv1.1 TLSv1.2 TLSv1.3;

    # Add Alt-Svc header to negotiate HTTP/3.
    add_header alt-svc 'h3=":443"; ma=86400';
    
}

Maybe you could try the firefox or EDGE rather than Chrome . I think the browser manages the protocols swithing .

Thank you very much for your reply. However, the latest version of NGINX has started to support the quic protocol, and I have successfully configured it. I have a new question for you, that is, what test tool was used in the picture above to test out?

[bhzhu203]

Hello, I encountered some problems when configuring the quic service of NGINX. My configuration is the same as the official website, but I still cannot use the quic protocol when accessing the server， and h2 protocol is still used. This is the configuration: server { # Enable QUIC and HTTP/3. listen 443 quic reuseport; server_name test.cn;

    # Enable HTTP/2 (optional).
    listen 443 ssl http2;

    ssl_certificate      /usr/local/nginx/conf/cert/test.pem;
    ssl_certificate_key  /usr/local/nginx/conf/cert/test.key;

    # Enable all TLS versions (TLSv1.3 is required for QUIC).
    ssl_protocols TLSv1 TLSv1.1 TLSv1.2 TLSv1.3;

    # Add Alt-Svc header to negotiate HTTP/3.
    add_header alt-svc 'h3=":443"; ma=86400';
    
}

Maybe you could try the firefox or EDGE rather than Chrome . I think the browser manages the protocols swithing .

Thank you very much for your reply. However, the latest version of NGINX has started to support the quic protocol, and I have successfully configured it. I have a new question for you, that is, what test tool was used in the picture above to test out?

First you should configure your nginx to using json log output

   log_format compression escape=json '{"@timestamp":"$time_iso8601",'
                           '"ip":"$remote_addr","host":"$http_host",'
                           '"rq":"$request","rqb":"$request_body",'
                           '"st":"$status","size":$body_bytes_sent,'
                           '"ua":"$http_user_agent","ck":"$http_cookie",'
                           '"cost":"$request_time",'
                           '"ref":"$http_referer",'
                           '"xff":"$http_x_forwarded_for",'
                           '"ust":"$upstream_status",'
                           '"uip":"$upstream_addr",'
                           '"ut":"$upstream_response_time"}';
  
    access_log  logs/access.log  compression;

The second , Using AliBaba cloud SLS service (logtail tool , you could install in your server,not only the Alibaba could server ) to collect the nginx log data.

Using the data to draw your graph you need . You could use it like SQL. The Experience is like Kibana.

'"cost":"$request_time",' To analyze the "cost" column in minutes/hour average you can find something.

[Ryenum]

Hello, I made the same effect with you through the local self-matching server, QUIC protocol download speed is indeed not as good as TCP protocol, but its upload speed is better than TCP protocol, I would like to ask you know the reason?